www.pieweb.com

Production and Engineering Research

PFAS
More 'forever chemicals' in plant-based straws than plastic ones – study
13.09.2023
RESEARCH
Recycling of polycarbonate chocolate moulds – IKT
01.09.2023
POM
Research: US scientists develop electrochemical depolymerisation / Recycling process said to yield high-quality monomer
30.08.2023
RESEARCH
Catalytic process to convert ethylene – University of Virginia / Potential to reduce negative impact of plastics production
28.08.2023
PLASTICS AND ENVIRONMENT
Less plastics waste entering oceans / Sheer volume of microplastics hampers cleanup / Inland waterways highly polluted
24.08.2023
CIRCULAR ECONOMY
Toing and froing about life-cycle assessment is not enough – Fraunhofer study / PIE talks to Umsicht's Jürgen Bertling
18.08.2023
AVIATION
UK plans EUR 93 mn composites R&D centre / Boeing first project partner
01.08.2023
BIOPLASTICS
Compostable polymers biodegrade in real conditions – study / ‘Strong signal for policy makers‘
03.07.2023
BIOPLASTICS
Aimplas collaborates with EU's Preserve project / Development of bio-based plastic packaging
26.06.2023
PLASTICS RECYCLING
Reclaim ops may create waterborne pollution / Groups want EU to support closed-loop recycling
06.06.2023
PLASTICS AND HEALTH
Recycling plastic leads to increased toxicity in material – Greenpeace report / Recycled plastics vectors for spreading chemicals of concern – Cambridge study / BPF response
02.06.2023
COMPOSITES RECYCLING
Eliot project ends / Researchers laud solvolysis, pyrolysis reclaim technologies for aeronautics parts
18.05.2023
RESEARCH
Microorganisms that break down plastics at low temperatures / Potential for efficient plastics waste recycling
16.05.2023
ASAHI KASEI
Demo project for microwave PA 6.6 depolymerisation technology / Decision on commercialisation expected by early 2026
11.05.2023
RESEARCH
Water-based plastics recycling project receives funding / High temperature, pressure to decompose polymers
06.04.2023
RESEARCH
Project to increase recyclate content in food packaging / Launch of digital platform Coppa
09.03.2023
AUSTRALIA
SUP bans planned almost everywhere / Science academy calls for urgent action on plastic pollution / Government accused of over-reliance on volunteers for data collection
06.03.2023
PLASTIC PACKAGING
Fraunhofer study says plastic crates more sustainable than throwaway cardboard
22.02.2023
MARINE LITTER
Plastics waste in the Arctic comes from all over the world / “Even rich industrial nations make a significant contribution to the pollution” – AWI study
16.02.2023
PLASTICS RECYCLING
US study rates performance of reclaim processes / Focus on major polymers
16.02.2023
RESEARCH
New techniques transform waste plastics / Resulting materials target agriculture, pharma, cosmetics
20.01.2023
SABIC
Materials giant teams up with Chinese and Mexican firms to trial new polyolefin film products
28.11.2022
E&E RECYCLING
New protocols on recovery, reuse, ecodesign for E&E components / Multinational C-Servees project
18.11.2022
CHEMICAL INDUSTRY
Calculating product carbon footprint / TfS initiative publishes industry guidelines / BASF and Lanxess spotlight progress at K 2022
25.10.2022
RECYCLING
US researchers turn CO2 into ethylene / Six tonnes to make one
29.09.2022
Seite 1 von 12
Topic search
Plastics Information Europe
  • Polymer Prices (5.475)
    • Petrochemicals (333)
    • Standard Thermoplastics (845)
    • PET (227)
    • Engineering Thermoplastics (231)
    • Recyclate (325)
      • Standard Thermoplastics / Recyclate (162)
      • Engineering Thermoplastics / Recyclate (163)
    • Polyurethanes (225)
    • High Performance Polymers (2)
    • Composites (161)
    • Announcements (2.502)
    • World Regions (520)
      • China (250)
        • Standard Thermoplastics (126)
        • Engineering Thermoplastics (124)
      • North America (146)
      • Russia (124)
    • Spot Prices (104)
  • Companies (30.945)
    • Polymer Materials (15.329)
      • Petrochemicals (2.746)
      • Charge (1.708)
        • General (85)
        • Masterbatches (322)
        • Additives (713)
        • Colours (338)
        • Reinforcements/Fillers (250)
      • Polymers (9.799)
        • General (618)
        • Standard Thermoplastics (3.398)
          • General (111)
          • Polyolefins (1.696)
          • Polystyrenes (306)
          • PVC (603)
          • Polyester (503)
          • Expandable (PS, PP, PE) (179)
        • Technical Thermoplastics (2.938)
          • General (337)
          • Styrene Copolymers (235)
          • PC/PMMA (401)
          • Polyamides (801)
          • POM/PBT/PP (289)
          • Technical Compounds (875)
        • PUR (707)
        • Other (2.138)
          • General (92)
          • Composites/Thermosets (380)
          • High Performance (544)
          • Biopolymers (625)
          • Elastomers/TPE (326)
          • Recyclate (171)
      • Distribution (1.076)
    • Machinery (1.031)
      • General (25)
      • Plant Construction (126)
      • Core Machines (707)
        • General (83)
        • Extrusion (174)
        • Injection Moulding (348)
        • Blow Moulding (70)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (169)
        • General (30)
        • Control Systems (4)
        • Automatisation (31)
        • Dies/Tools/Moulds (91)
        • Components (13)
      • Finishing (4)
    • Processing (6.504)
      • General (799)
      • Extrusion (2.153)
        • General (107)
        • Flexible Films (1.029)
        • Rigid Films/Sheet (354)
        • Pipes (323)
        • Profiles/Rods (247)
        • Other (93)
      • Injection Moulding (1.550)
      • Blow Moulding (472)
      • PUR (261)
      • Other (1.044)
        • General (109)
        • Foam (291)
        • Composites/Thermosets (323)
        • Thermoforming (198)
        • Rotational Moulding (30)
        • Additive Manufacturing (93)
      • Finishing (225)
    • Application (6.544)
      • General (121)
      • Packaging (2.797)
      • Construction (656)
      • Automotive / Transport (1.507)
      • Electrical Appliances (313)
      • Consumer Goods (604)
      • Medical (361)
      • Technical (185)
    • Other (1.537)
      • Recycling/Disposal (1.269)
      • Services (231)
      • Logistics (37)
  • Commercial Register (93)
    • Insolvency (88)
    • Changes (5)
  • Markets (20.436)
    • Polymer Materials (8.896)
      • Petrochemicals (2.144)
      • Charge (795)
        • General (38)
        • Masterbatches (86)
        • Additives (321)
        • Colours (140)
        • Reinforcements/Fillers (210)
      • Polymers (5.617)
        • General (598)
        • Standard Thermoplastics (2.187)
          • General (70)
          • Polyolefins (1.076)
          • Polystyrenes (144)
          • PVC (457)
          • Polyester (311)
          • Expandable (PS, PP, PE) (129)
        • Technical Thermoplastics (1.165)
          • General (85)
          • Styrene Copolymers (94)
          • PC/PMMA (135)
          • Polyamides (398)
          • POM/PBT/PP (101)
          • Technical Compounds (352)
        • PUR (418)
        • Other (1.249)
          • General (40)
          • Composites/Thermosets (282)
          • High Performance (282)
          • Biopolymers (389)
          • Elastomers/TPE (129)
          • Recyclate (127)
      • Other Materials (54)
      • Distribution (286)
    • Machinery (487)
      • General (126)
      • Plant Construction (14)
      • Core Machines (277)
        • General (105)
        • Extrusion (35)
        • Injection Moulding (116)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (70)
        • General (21)
        • Automatisation (15)
        • Dies/Tools/Moulds (34)
    • Processing (1.590)
      • General (378)
      • Extrusion (586)
        • General (20)
        • Flexible Films (285)
        • Rigid Films/Sheets (113)
        • Pipes (70)
        • Profiles/Rods (88)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (73)
      • Other (292)
        • General (19)
        • Foam (75)
        • Composites/Thermosets (134)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (36)
      • Finishing (44)
    • Applications (3.529)
      • General (32)
      • Packaging (1.658)
      • Construction (275)
      • Automotive / Transport (856)
      • Electrical Appliances (209)
      • Consumer Goods (219)
      • Medical (188)
      • Technical (53)
      • Other (39)
    • Regions and Countries (3.883)
      • World (191)
      • German-speaking Countries (449)
      • Europe (1.866)
        • General (433)
        • Italy (138)
        • France (153)
        • Spain/Portugal (91)
        • Great Britain/Ireland (488)
        • Low Countries (74)
        • Central Europe (171)
        • Scandinavia (43)
        • Russia (94)
        • Eastern Europe (44)
        • Southeastern Europe (137)
      • North America (466)
      • Asia (654)
        • General (114)
        • China (383)
        • Japan (49)
        • Korea (26)
        • India (82)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.051)
      • Recycling/Disposal (1.637)
      • Economic Trend (237)
      • Services (40)
      • Logistics (137)
  • Production and Engineering (3.467)
    • Polymer Materials (2.186)
      • Petrochemicals (49)
      • Charge (421)
        • General (12)
        • Masterbatches (106)
        • Additives (216)
        • Colours (52)
        • Reinforcements/Fillers (35)
      • Polymers (1.687)
        • General (26)
        • Standard Themoplastics (336)
        • Technical Thermoplastics (578)
          • General (19)
          • Styrene Copolymers (59)
          • PC/PMMA (61)
          • Polyamides (196)
          • POM/PBT/PP (65)
          • Technical Compounds (178)
        • PUR (66)
        • Other (681)
          • General (19)
          • Composites/Thermosets (104)
          • High Performance (157)
          • Biopolymers (219)
          • Elastomers/TPE (105)
          • Recyclate (77)
      • Other (29)
    • Machinery (93)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (32)
    • Research (379)
      • Polymer Materials (127)
      • Technical (12)
      • Product Development (38)
      • Process (73)
      • Application (82)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (43)
    • New Products (773)
      • Packaging (496)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (24)
      • Consumer Goods (46)
      • Medical (35)
      • Technical (7)
      • Other (35)
    • Other (36)
  • Management (499)
    • Purchasing (85)
    • General Management (103)
    • Company organisation (43)
    • Marketing/Sales (12)
    • Human Resources (6)
    • Finances (75)
    • Logistics (175)
  • People (1.416)
  • Industry (4.962)
    • General (1.041)
    • Associations/Institutions (1.935)
    • Legislation (1.000)
    • Environment / Health (976)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.093)
  • Plastic Fantastic (479)
  • Commentaries (69)
  • Interviews (112)
  • Notes by Publisher (60)
© 2023 by Plastics Information Europe, Bad Homburg
Date of print: 28/09/2023
Ref: 5r4tqoz4anlogknxw1uzefit
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&tree=open&node=100320