www.pieweb.com
Strengthen your position in business negotiations!
  • European market reports for standard and engineering,
    thermoplastics, polyurethanes, recyclate, composites/GRP,
    feedstocks – more than 100 grades of polymer covered.
  • MyPrices – individually configured reports and e-mail alerts
  • Comparative and analytical tools
Engineering Thermoplastics / Recyclate
POLYMER PRICES
Engineering Recyclate January 2019: Rollover for all types / Prices unlikely to move much until Q2 / Surprisingly strong automotive demand / Situation with base material eases
 		21.01.2019
POLYMER PRICES
Engineering Recyclate December 2018: Significant reductions with some regrind types / PA 6.6 feedstocks still short and expensive / Demand far weaker than in previous years / Automotive segment continues tending weak
 		20.12.2018
POLYMER PRICES
Engineering Recyclate November 2018: Weak demand from automotive industry erodes prices for rABS, rPC and rPP compounds / Primary market fuels strong rPA 6.6 increase / Demand remains below expectations
 		21.11.2018
POLYMER PRICES
Engineering Recyclate October 2018: Rollovers dominate / Production largely running normally / Demand weakens / More movement expected next month
 		19.10.2018
POLYMER PRICES
Engineering Recyclate September 2018: General rollover in September / Upcoming hikes for polyamides set to also push up recyclates / Strong production month expected
 		21.09.2018
POLYMER PRICES
Engineering Recyclate August 2018: General uptrend loses momentum / Some notations slightly up, others take a breather / Holiday season puts damper on demand
 		21.08.2018
POLYMER PRICES
Engineering Recyclate July 2018: Primary product increases roll through secondary market / Large hikes for rPA 6.6 and rPC / Brisk demand continues / Varying trends in August
 		19.07.2018
POLYMER PRICES
Engineering Recyclate June 2018: Bottleneck for rPA 6.6 dogs market / Dramatic hikes / rPC consistently tight / Demand still lively / More increases sure to come in July
 		20.06.2018
POLYMER PRICES
Engineering Recyclate May 2018: All is still calm / rPC tends upwards / Demand reasonable despite many bank holidays / Prices expected to rise especially for rPA types and rPC / Base polymer often tight
 		18.05.2018
POLYMER PRICES
Engineering Recyclate April 2018: Little change this month / Upturn probable in coming weeks / Demand quite reasonable of late / Still minor delivery delays
 		20.04.2018
POLYMER PRICES
Engineering Recyclate March 2018: Respite for price rises / rPA 6.6 and rPOM nevertheless on the up / rABS and rPA 6 rather quiet / rPC awaits next surge
 		19.03.2018
POLYMER PRICES
Engineering Recyclate February 2018: Prices for all types on the up / Extremely tight supply situation with base material / No relief on the horizon / Significantly longer delivery times
 		19.02.2018
POLYMER PRICES
Engineering Recyclate January 2018: Rollovers predominate in December / Hikes probably only as of February / Base material scarce and expensive in part / Order situation still good
 		19.01.2018
POLYMER PRICES
Engineering Recyclate December 2017: Only a few minor increases / Strong demand for regrind material expected in new year / Availability of base material likely to deteriorate
 		21.12.2017
POLYMER PRICES
Engineering Recyclate November 2017: Prices remain unchanged apart from ABS / Tense situation with base material / Strong demand for time of year / Stability should prevail until end of 2017 / Small increases likely in January for some products
 		20.11.2017
POLYMER PRICES
Engineering Recyclate October 2017: Prices move in different directions / Uptrend for rABS, rPOM, rPP and rPC/ABS blends / Some decreases for rPA 6 / Demand reasonable / Base material remains expensive
 		18.10.2017
POLYMER PRICES
Engineering Recyclate September 2017: Recycled ABS and PP compounds up slightly / Demand grows after holiday season / Few supply restrictions / Base material remains expensive
 		21.09.2017
POLYMER PRICES
Engineering Recyclate August 2017: Prices rollover in all cases / Base material remains expensive / Situation eased by fall in demand / Minor reductions likely for rPA and rPOM in September / Secondary PP compounds tending upwards
 		21.08.2017
POLYMER PRICES
Engineering Recyclate July 2017: Prices calm down as the holiday season gets underway / Stability predominates / Only rPOM rises again / Next few weeks likely quiet
 		21.07.2017
POLYMER PRICES
Engineering Recyclate June 2017: PC and POM regrind material partly see marked increases / Lively demand from all segments / Rollover probable in July with the exception of polyamides
 		23.06.2017
Seite 1 von 5
Notes on these reports
Prices listed are reference values for leading types and include orders ranging from 1 t to full loads sold in western Europe. However, there are certain qualities and types whose price lies well beyond (either above or below) the notations.
Price details
Recyclate / Engineering Thermoplastics
rABS ind black
rPA 6 natural
rPA 6 black
rPA 6 GF natural
rPA 6 GF black
rPA 6.6 natural
rPA 6.6 black
rPA 6.6 GF natural
rPA 6.6 GF black
rPOM natural
rPOM black
rPC natural
rPC black
rPC GF
rPC / rABS blends
rPP-C compounds copo, talc. filled
© 2019 by Plastics Information Europe, Bad Homburg
Date of print: 17/02/2019
Ref: pxefzfb00jjthfyfqdezxg45
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=216