www.pieweb.com
Strengthen your position in business negotiations!
  • European market reports for standard and engineering,
    thermoplastics, polyurethanes, recyclate, composites/GRP,
    feedstocks – more than 100 grades of polymer covered.
  • MyPrices – individually configured reports and e-mail alerts
  • Comparative and analytical tools

Production and Engineering

ALBIS
Compounds developed for fuel cell applications
09.01.2020
POLYPLASTICS
Development of blister-resistant liquid crystal polymer grades
07.01.2020
BASF
Next-generation "Basotect UF+" insulating foam grade available
06.01.2020
CHEMICAL RECYCLING
Cross-industry consortium to advance technology targeting hard-to-recycle PET waste / Alpla, Britvic, BP, Danone, Remondis and Unilever
02.01.2020
STORA ENSO
Pilot plant for PEF precursor in Belgium / Renewable packaging materials
20.12.2019
STOROPACK
New recycled polystyrene raw material for protective packaging production
18.12.2019
BASF
Bio-based colour masterbatch launched for rPE
12.12.2019
COVERIS
New shrink film in “Duralite” range is recyclable and contains recyclate
11.12.2019
BEWISYNBRA
Recyclable EPS introduced following successful trials / Commercial deliveries to begin early 2020
06.12.2019
JSP
EPP particle foam with recycled content / Same mechanical properties as virgin material
05.12.2019
ESSEL PROPACK
Launch of two recyclable HDPE tubes / APR certified
02.12.2019
TETRA PAK / BRASKEM
Partnership on bio-based polymers for carton packaging
28.11.2019
MARKET RESEARCH
BT2i and Nova-Institute offer advice for green plastic solutions
28.11.2019
SPAIN
Plastics companies seek to improve recycling of multilayer food packaging to obtain high-quality recycled PA / Aimplas project
25.11.2019
INEOS
New polymer range contains up to 50% post-consumer recyclate / Cologne site certified to produce bio-attributed olefins and polyolefins
25.11.2019
SEKISUI ALVEO
New "Alveobloc" block foam targets automotive applications requiring low emissions
21.11.2019
EVONIK
Expansion of 3D printing engagement / Partnership with NXT Factory
19.11.2019
EPSAN
Launch of PA compounds for public transport applications
19.11.2019
CABOT
“Athlos” carbon nanostructures for engineering plastics
15.11.2019
POLYONE
Launch of TPEs with bio-renewable content / Suitable for overmoulding rigid PP and ABS
14.11.2019
CLARIANT
New barrier for PET packaged food and beverages
06.11.2019
WOODLY
Films and flexible packaging made of wood cellulose / Prototypes in cooperation with Amerplast and Wipak
04.11.2019
BAERLOCHER
Additives manufacturer extends portfolio of stabilisers for recycling / Investments in the last years focused on Asia
31.10.2019
COEXPAN
Launch of 100% rPET tray for food contact use / Formulated for thermoforming market
30.10.2019
UNITED CAPS
First solutions for attached plastic closures / Presented at "K 2019" together with LyondellBasell
29.10.2019
Seite 1 von 83
Topic search
Plastics Information Europe
  • Polymer Prices (4.330)
    • Petrochemicals (211)
    • Standard Thermoplastics (616)
    • PET (182)
    • Engineering Thermoplastics (186)
    • Recyclate (235)
      • Standard Thermoplastics / Recyclate (117)
      • Engineering Thermoplastics / Recyclate (118)
    • Polyurethanes (180)
    • High Performance Polymers (2)
    • Composites (117)
    • Announcements (2.183)
    • World Regions (361)
      • China (162)
        • Standard Thermoplastics (82)
        • Engineering Thermoplastics (80)
      • North America (102)
      • Russia (97)
    • Spot Prices (57)
  • Companies (23.203)
    • Polymer Materials (11.416)
      • Petrochemicals (2.013)
      • Charge (1.393)
        • General (60)
        • Masterbatches (272)
        • Additives (562)
        • Colours (275)
        • Reinforcements/Fillers (224)
      • Polymers (7.140)
        • General (389)
        • Standard Thermoplastics (2.571)
          • General (87)
          • Polyolefins (1.259)
          • Polystyrenes (213)
          • PVC (482)
          • Polyester (385)
          • Expandable (PS, PP, PE) (145)
        • Technical Thermoplastics (2.110)
          • General (286)
          • Styrene Copolymers (164)
          • PC/PMMA (272)
          • Polyamides (547)
          • POM/PBT/PP (192)
          • Technical Compounds (649)
        • PUR (521)
        • Other (1.549)
          • General (77)
          • Composites/Thermosets (318)
          • High Performance (399)
          • Biopolymers (475)
          • Elastomers/TPE (245)
          • Rezyklate (35)
      • Distribution (870)
    • Machinery (928)
      • General (17)
      • Plant Construction (102)
      • Core Machines (648)
        • General (71)
        • Extrusion (156)
        • Injection Moulding (327)
        • Blow Moulding (64)
        • Foam (10)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (158)
        • General (26)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (86)
        • Components (13)
      • Finishing (3)
    • Processing (5.272)
      • General (661)
      • Extrusion (1.740)
        • General (81)
        • Flexible Films (818)
        • Rigid Films/Sheet (290)
        • Pipes (272)
        • Profiles/Rods (208)
        • Other (71)
      • Injection Moulding (1.259)
      • Blow Moulding (376)
      • PUR (204)
      • Other (844)
        • General (91)
        • Foam (230)
        • Composites/Thermosets (286)
        • Thermoforming (159)
        • Rotational Moulding (24)
        • Additive Manufacturing (54)
      • Finishing (188)
    • Application (4.885)
      • General (84)
      • Packaging (2.017)
      • Construction (513)
      • Automotive / Transport (1.208)
      • Electrical Appliances (253)
      • Consumer Goods (400)
      • Medical (271)
      • Technical (139)
    • Other (702)
      • Recycling/Disposal (550)
      • Services (152)
  • Commercial Register (66)
    • Insolvency (61)
    • Changes (5)
  • Markets (14.813)
    • Polymer Materials (6.431)
      • Petrochemicals (1.530)
      • Charge (646)
        • General (33)
        • Masterbatches (75)
        • Additives (245)
        • Colours (105)
        • Reinforcements/Fillers (188)
      • Polymers (4.055)
        • General (313)
        • Standard Thermoplastics (1.715)
          • General (47)
          • Polyolefins (846)
          • Polystyrenes (107)
          • PVC (357)
          • Polyester (246)
          • Expandable (PS, PP, PE) (112)
        • Technical Thermoplastics (827)
          • General (74)
          • Styrene Copolymers (57)
          • PC/PMMA (105)
          • Polyamides (280)
          • POM/PBT/PP (67)
          • Technical Compounds (244)
        • PUR (310)
        • Other (890)
          • General (31)
          • Composites/Thermosets (229)
          • High Performance (224)
          • Biopolymers (288)
          • Elastomers/TPE (98)
          • Recyclate (20)
      • Other Materials (12)
      • Distribution (188)
    • Machinery (430)
      • General (106)
      • Plant Construction (12)
      • Core Machines (244)
        • General (86)
        • Extrusion (31)
        • Injection Moulding (106)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.311)
      • General (273)
      • Extrusion (490)
        • General (18)
        • Flexible Films (231)
        • Rigid Films/Sheets (95)
        • Pipes (64)
        • Profiles/Rods (75)
        • Other (7)
      • Injection Moulding (170)
      • Blow Moulding (36)
      • PUR (58)
      • Other (242)
        • General (18)
        • Foam (54)
        • Composites/Thermosets (126)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (16)
      • Finishing (42)
    • Applications (2.386)
      • General (19)
      • Packaging (1.018)
      • Construction (215)
      • Automotive / Transport (672)
      • Electrical Appliances (167)
      • Consumer Goods (128)
      • Medical (106)
      • Technical (38)
      • Other (23)
    • Regions and Countries (3.459)
      • World (170)
      • German-speaking Countries (390)
      • Europe (1.676)
        • General (379)
        • Italy (125)
        • France (149)
        • Spain/Portugal (74)
        • Great Britain/Ireland (447)
        • Low Countries (73)
        • Central Europe (165)
        • Scandinavia (40)
        • Russia (83)
        • Eastern Europe (37)
        • Southeastern Europe (104)
      • North America (398)
      • Asia (581)
        • General (103)
        • China (332)
        • Japan (46)
        • Korea (24)
        • India (76)
      • Middle East (134)
      • Other (34)
      • South America (76)
    • Other (796)
      • Recycling/Disposal (722)
      • Economic Trend (50)
      • Services (24)
  • Production and Engineering (2.503)
    • Polymer Materials (1.626)
      • Petrochemicals (26)
      • Charge (328)
        • General (12)
        • Masterbatches (74)
        • Additives (169)
        • Colours (38)
        • Reinforcements/Fillers (35)
      • Polymers (1.247)
        • General (15)
        • Standard Themoplastics (239)
        • Technical Thermoplastics (471)
          • General (17)
          • Styrene Copolymers (43)
          • PC/PMMA (47)
          • Polyamides (161)
          • POM/PBT/PP (52)
          • Technical Compounds (151)
        • PUR (53)
        • Other (469)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (121)
          • Biopolymers (150)
          • Elastomers/TPE (87)
          • Recyclate (1)
      • Other (25)
    • Machinery (83)
      • Extrusion (17)
        • General (7)
        • Flexible Films (4)
        • Calender (3)
        • Pipes/Profiles (3)
      • Injection Moulding (30)
        • General (14)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (236)
      • Polymer Materials (85)
      • Technical (10)
      • Product Development (26)
      • Process (53)
      • Application (45)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (15)
    • New Products (533)
      • Packaging (329)
      • Construction (26)
      • Automotive / Transport (71)
      • Electrical Appliances (21)
      • Consumer Goods (30)
      • Medical (26)
      • Technical (7)
      • Other (23)
    • Other (25)
  • Management (141)
    • Purchasing (23)
    • General Management (40)
    • Company organisation (33)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (34)
  • People (1.220)
  • Industry (2.739)
    • General (651)
    • Associations/Institutions (1.154)
    • Legislation (605)
    • Environment / Health (329)
  • Events (930)
  • Plastic Fantastic (345)
  • Commentaries (51)
  • Interviews (60)
  • Notes by Publisher (25)
© 2020 by Plastics Information Europe, Bad Homburg
Date of print: 18/01/2020
Ref: fzrxl455dm3e0m45jhhzxyjc
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&tree=open&node=100280