www.pieweb.com

Polymer Prices China Engineering Thermoplastics

POLYMER PRICES
China engineering thermoplastics December: Prices mostly sideways to lower on weak demand; ABS strengthens / January seen weak ahead of Spring Festival despite rising crude oil prices
13.01.2025
POLYMER PRICES
China engineering thermoplastics November: Weak demand drives price decreases / PBT bucks the trend / Further decreases expected in December
16.12.2024
POLYMER PRICES
China engineering thermoplastics October: Prices mostly sideways to lower / Strong rise only for PBT / Low demand dominates / Little change to falling quotations expected in November
15.11.2024
POLYMER PRICES
China engineering thermoplastics September: Prices for most grades decline / Feedstock costs, demand low / Quotations to trend mixed in October
14.10.2024
POLYMER PRICES
China engineering thermoplastics August: Quotations for most grades softer due to low demand during off-season / Only ABS, PMMA up / September seen softer despite markets entering high season
13.09.2024
POLYMER PRICES
China engineering thermoplastics July 2024: Quotations for most grades move lower or sideways on weak demand / POM plummets / Livelier demand in August to have little impact on prices
12.08.2024
POLYMER PRICES
China engineering thermoplastics June 2024: Prices move sideways or lower / Demand weak across the board / Prices seen softening in July as demand remains weak
16.07.2024
POLYMER PRICES
China engineering thermoplastics May 2024: Slight uptick in prices predominates / Significant hike for PMMA / Feedstocks mostly somewhat firmer / Stable to falling quotations expected in June
13.06.2024
POLYMER PRICES
China engineering thermoplastics April 2024: Prices mixed / ABS, PC, PMMA higher, POM and PBT fall / Most feedstock prices firm / May seen moving sideways as markets enter summer season
14.05.2024
POLYMER PRICES
China engineering thermoplastics March 2024: Prices mostly unchanged amid disappointing demand / Only ABS, PA 6.6, PMMA prices move higher on back of rising input cost / April seen flat to higher
10.04.2024
POLYMER PRICES
China engineering thermoplastics February 2024: Prices mostly rise, some roll over / Feedstock costs higher, supply low / More increases likely in March
14.03.2024
POLYMER PRICES
China engineering thermoplastics January 2024: POM skyrockets amid low availability / Feedstock costs broadly higher / Demand muted ahead of holidays / February seen mixed
12.02.2024
POLYMER PRICES
China engineering thermoplastics December 2023: Softer costs, low demand push down most prices / Exceptions are PA 6, PMMA / Spring Festival to mute demand in February
10.01.2024
POLYMER PRICES
China engineering thermoplastics November 2023: Prices mostly lower due to softer feedstock cost, low demand, healthy supply / Only polyamides, POM up / December seen sideways to lower
12.12.2023
POLYMER PRICES
China engineering thermoplastics October 2023: Prices broadly lower as feedstocks take cue from softer crude oil / November prices expected to ease on softer demand
13.11.2023
POLYMER PRICES
China engineering thermoplastics September 2023: Expensive crude oil pushes polymer prices / National holiday paralyses demand in October / Unchanged to falling quotations expected
13.10.2023
POLYMER PRICES
China engineering thermoplastics August 2023: Prices mostly higher as feedstock prices firm, supply slows / Only PA 6.6, ABS lower amid higher supply or lower feedstock cost / Seasonal demand to support September prices
11.09.2023
POLYMER PRICES
China engineering thermoplastics July 2023: Weak demand pushes PA 6.6, PMMA, PBT prices lower / Other grades supported by higher feedstock prices or higher demand / August seen bullish
14.08.2023
POLYMER PRICES
China engineering thermoplastics June 2023: Prices down across the board / Feedstocks mostly lower / Lackluster buying as market enters summer lull / July seen softer
13.07.2023
POLYMER PRICES
China engineering thermoplastics May 2023: Ample supply, weak demand depress / Only PMMA, PBT firmer as feedstock costs firm / Downward trend to continue in June
16.06.2023
POLYMER PRICES
China engineering thermoplastics April 2023: Prices of most thermoplastics lower due to ample supply and low demand / Only PMMA and PBT prices up / May prices seen as mixed
12.05.2023
POLYMER PRICES
China engineering thermoplastics March 2023: Weak domestic demand weighs on prices / Further markdowns in April likely, except for PA 6, POM / Capacity utilisation of production plants still low in many cases
12.04.2023
POLYMER PRICES
China engineering thermoplastics February 2023: Prices mostly sideways to lower / Post-holiday demand recovery slower than expected / Feedstock prices higher, BDO's massive jump drives PBT up sharply / Outlook mixed
15.03.2023
POLYMER PRICES
China engineering thermoplastics January 2023: Prices mixed / POM, PBT, PA 6 follow feedstocks higher / Spring Festival mutes demand / Upswing expected
15.02.2023
POLYMER PRICES
China engineering thermoplastics December 2022: Prices fall across the board / Low downstream demand / Feedstock prices softer / Chinese New Year to curtail upswing
13.01.2023
Seite 1 von 6
Topic search
Plastics Information Europe
  • Polymer Prices (5.917)
    • Petrochemicals (446)
    • Standard Thermoplastics (936)
    • PET (244)
    • Engineering Thermoplastics (251)
    • Recyclate (359)
      • General (2)
      • Standard Thermoplastics / Recyclate (178)
      • Engineering Thermoplastics / Recyclate (179)
    • Polyurethanes (242)
    • High Performance Polymers (2)
    • Composites (178)
    • Announcements (2.565)
    • World Regions (568)
      • China (282)
        • Standard Thermoplastics (142)
        • Engineering Thermoplastics (140)
      • North America (162)
      • Russia (124)
    • Spot Prices (120)
    • Forecasts (6)
  • Companies (33.632)
    • Polymer Materials (16.662)
      • Petrochemicals (2.991)
      • Charge (1.810)
        • General (89)
        • Masterbatches (333)
        • Additives (757)
        • Colours (370)
        • Reinforcements/Fillers (261)
      • Polymers (10.711)
        • General (689)
        • Standard Thermoplastics (3.705)
          • General (113)
          • Polyolefins (1.880)
          • Polystyrenes (325)
          • PVC (649)
          • Polyester (548)
          • Expandable (PS, PP, PE) (190)
        • Technical Thermoplastics (3.161)
          • General (349)
          • Styrene Copolymers (255)
          • PC/PMMA (446)
          • Polyamides (871)
          • POM/PBT/PP (307)
          • Technical Compounds (933)
        • PUR (769)
        • Other (2.387)
          • General (101)
          • Composites/Thermosets (401)
          • High Performance (594)
          • Biopolymers (688)
          • Elastomers/TPE (362)
          • Recyclate (241)
      • Distribution (1.150)
    • Machinery (1.070)
      • General (27)
      • Plant Construction (131)
      • Core Machines (735)
        • General (89)
        • Extrusion (178)
        • Injection Moulding (365)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (173)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.929)
      • General (865)
      • Extrusion (2.278)
        • General (113)
        • Flexible Films (1.101)
        • Rigid Films/Sheet (369)
        • Pipes (342)
        • Profiles/Rods (255)
        • Other (98)
      • Injection Moulding (1.665)
      • Blow Moulding (497)
      • PUR (291)
      • Other (1.097)
        • General (118)
        • Foam (302)
        • Composites/Thermosets (339)
        • Thermoforming (211)
        • Rotational Moulding (31)
        • Additive Manufacturing (96)
      • Finishing (236)
    • Application (7.113)
      • General (125)
      • Packaging (3.067)
      • Construction (700)
      • Automotive / Transport (1.632)
      • Electrical Appliances (331)
      • Consumer Goods (662)
      • Medical (387)
      • Technical (209)
    • Other (1.858)
      • Recycling/Disposal (1.497)
      • Services (250)
      • Logistics (111)
  • Commercial Register (115)
    • Insolvency (110)
    • Changes (5)
  • Markets (22.565)
    • Polymer Materials (9.786)
      • Petrochemicals (2.387)
      • Charge (839)
        • General (38)
        • Masterbatches (91)
        • Additives (334)
        • Colours (154)
        • Reinforcements/Fillers (222)
      • Polymers (6.184)
        • General (739)
        • Standard Thermoplastics (2.373)
          • General (74)
          • Polyolefins (1.173)
          • Polystyrenes (155)
          • PVC (494)
          • Polyester (340)
          • Expandable (PS, PP, PE) (137)
        • Technical Thermoplastics (1.248)
          • General (87)
          • Styrene Copolymers (103)
          • PC/PMMA (148)
          • Polyamides (426)
          • POM/PBT/PP (108)
          • Technical Compounds (376)
        • PUR (446)
        • Other (1.378)
          • General (47)
          • Composites/Thermosets (288)
          • High Performance (295)
          • Biopolymers (427)
          • Elastomers/TPE (139)
          • Recyclate (182)
      • Other Materials (57)
      • Distribution (319)
    • Machinery (503)
      • General (127)
      • Plant Construction (14)
      • Core Machines (291)
        • General (109)
        • Extrusion (37)
        • Injection Moulding (124)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.652)
      • General (407)
      • Extrusion (602)
        • General (20)
        • Flexible Films (294)
        • Rigid Films/Sheets (117)
        • Pipes (71)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (177)
      • Blow Moulding (43)
      • PUR (77)
      • Other (301)
        • General (20)
        • Foam (77)
        • Composites/Thermosets (138)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (45)
    • Applications (3.962)
      • General (37)
      • Packaging (1.915)
      • Construction (299)
      • Automotive / Transport (942)
      • Electrical Appliances (215)
      • Consumer Goods (247)
      • Medical (201)
      • Technical (59)
      • Other (47)
    • Regions and Countries (4.033)
      • World (194)
      • German-speaking Countries (475)
      • Europe (1.952)
        • General (469)
        • Italy (142)
        • France (155)
        • Spain/Portugal (97)
        • Great Britain/Ireland (503)
        • Low Countries (74)
        • Central Europe (173)
        • Scandinavia (44)
        • Russia (109)
        • Eastern Europe (46)
        • Southeastern Europe (140)
      • North America (484)
      • Asia (669)
        • General (119)
        • China (390)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (141)
      • Other (37)
      • South America (81)
    • Other (2.629)
      • Recycling/Disposal (1.952)
      • Economic Trend (362)
      • Services (41)
      • Logistics (213)
      • Energy (61)
  • Production and Engineering (3.724)
    • Polymer Materials (2.323)
      • Petrochemicals (58)
      • Charge (437)
        • General (14)
        • Masterbatches (111)
        • Additives (224)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.798)
        • General (30)
        • Standard Themoplastics (359)
        • Technical Thermoplastics (593)
          • General (19)
          • Styrene Copolymers (62)
          • PC/PMMA (62)
          • Polyamides (203)
          • POM/PBT/PP (67)
          • Technical Compounds (180)
        • PUR (72)
        • Other (744)
          • General (21)
          • Composites/Thermosets (107)
          • High Performance (159)
          • Biopolymers (241)
          • Elastomers/TPE (113)
          • Recyclate (103)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (425)
      • Polymer Materials (142)
      • Technical (13)
      • Product Development (41)
      • Process (81)
      • Application (89)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (55)
    • New Products (844)
      • Packaging (554)
      • Construction (34)
      • Automotive / Transport (99)
      • Electrical Appliances (26)
      • Consumer Goods (49)
      • Medical (37)
      • Technical (7)
      • Other (38)
    • Other (38)
  • Management (654)
    • Purchasing (100)
    • General Management (142)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (89)
    • Logistics (259)
  • People (1.483)
  • Industry (5.839)
    • General (1.153)
    • Associations/Institutions (2.245)
    • Legislation (1.242)
    • Environment / Health (1.189)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.124)
  • Plastic Fantastic (531)
  • Commentaries (78)
  • Interviews (132)
  • Notes by Publisher (71)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2025 by Plastics Information Europe, Bad Homburg
Date of print: 11/02/2025
Ref: nqlvw1bvbpc3db55ryr0x255
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_250528&node=100521