Show topic list

Production and Engineering New Products

HATZOPOULOS EU-funded project to develop biodegradable packaging for dried food / Consortium led by Hatzopoulos	16.12.2014
ELOPAK Beverage cartons with renewable PE launched in Europe / Key step towards target of 100% renewable packaging	12.12.2014
VICTREX Invibio Biomaterial Solutions highlights benefits of “PEEK Optima” spinal rods at “Eurospine 2014” symposium / Polymer material holds significant advantages over titanium	04.12.2014
BIAXPLEN New metallised BOPP film allows extended printing period	03.12.2014
GLOBAL CLOSURE SYSTEMS Lightweight 26mm closure introduced for water market	01.12.2014
COVERIS Multi-coloured PET/PE trays for meat products launched in Poland	24.11.2014
SIPA Lightweight compressed gas cylinders have plastic liners / PET provides high oxygen barrier	18.11.2014
AHLSTROM Carbon fibre reinforcement developed for longer and lighter turbine blades	18.11.2014
POLYNOVA Introducing naturally conductive polymers range in Germany / Properties bestowed by changes in nanostructure	12.11.2014
COVERIS Lightweight PE cap launched for drinks sector	10.11.2014
RPC SUPERFOS Packaging updated for Flora margarine range	06.11.2014
AVERY DENNISON Topcoated film developed for food labelling applications / Conformity with EU food safety regulations	03.11.2014
RPC New HDPE bottles for international gardening products supplier	29.10.2014
TEIJIN DUPONT FILMS Enhanced flame-retardant PEN film launched / Sales of EUR 14.6m targeted by March 2017	28.10.2014
EVONIK New PMMA moulding compound for automotive glazing	22.10.2014
TETRA PAK First 100% bio-based carton packaging launched / Commercial volumes due in early 2015	20.10.2014
FAERCH PLAST Sage and cream colour thermoforming packaging for relaunch of Tesco Italian ready meals / Freezer-to-oven convenience	15.10.2014
MAGNA Rear lid for BMW “i3” electric vehicle to be produced in Czech Republic	09.10.2014
BORMIOLI ROCCO New medical packaging uses Sabic's "Ultra-Clear" PP	02.10.2014
LG CHEMICAL Launch of high efficacy OLED light panels in November / Automotive lighting promises growth	23.09.2014
GREINER PACKAGING Introducing yogurt tub with silicone oxide barrier layer / Recyclable as mono-material	12.09.2014
OXFORD PERFORMANCE MATERIALS FDA clearance for 3D printed patient specific facial device / PEKK-based print produced by laser sintering additive manufacturing technology	01.09.2014
SEALED AIR Compostable films from Cardia Bioplastics specified for “PakNatural" range of cushion bags	29.08.2014
IGGESUND PAPERBOARD Elegant plastic-coated paper cup launched / Carbon footprint much reduced / Future long-term business opportunities expected	28.08.2014
AMCOR New PET bottle opens up sales opportunities for Canadian wine producer / Silicon oxide barrier coating	22.08.2014

Seite 19 von 31

Topic search

Plastics Information Europe

Polymer Prices (5.691)
- Petrochemicals (386)
- Standard Thermoplastics (887)
- PET (235)
- Engineering Thermoplastics (241)
- Recyclate (339)
  - Standard Thermoplastics / Recyclate (169)
  - Engineering Thermoplastics / Recyclate (170)
- Polyurethanes (232)
- High Performance Polymers (2)
- Composites (169)
- Announcements (2.541)
- World Regions (542)
  - China (264)
    - Standard Thermoplastics (133)
    - Engineering Thermoplastics (131)
  - North America (154)
  - Russia (124)
- Spot Prices (111)
- Forecasts (6)
Companies (32.094)
- Polymer Materials (15.892)
  - Petrochemicals (2.858)
  - Charge (1.758)
    - General (88)
    - Masterbatches (328)
    - Additives (729)
    - Colours (355)
    - Reinforcements/Fillers (258)
  - Polymers (10.175)
    - General (645)
    - Standard Thermoplastics (3.525)
      - General (112)
      - Polyolefins (1.776)
      - Polystyrenes (315)
      - PVC (620)
      - Polyester (520)
      - Expandable (PS, PP, PE) (182)
    - Technical Thermoplastics (3.032)
      - General (342)
      - Styrene Copolymers (241)
      - PC/PMMA (418)
      - Polyamides (834)
      - POM/PBT/PP (297)
      - Technical Compounds (900)
    - PUR (733)
    - Other (2.240)
      - General (95)
      - Composites/Thermosets (387)
      - High Performance (568)
      - Biopolymers (653)
      - Elastomers/TPE (342)
      - Recyclate (195)
  - Distribution (1.101)
- Machinery (1.043)
  - General (26)
  - Plant Construction (127)
  - Core Machines (715)
    - General (85)
    - Extrusion (174)
    - Injection Moulding (353)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (171)
    - General (30)
    - Control Systems (4)
    - Automatisation (32)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.686)
  - General (832)
  - Extrusion (2.201)
    - General (110)
    - Flexible Films (1.060)
    - Rigid Films/Sheet (358)
    - Pipes (330)
    - Profiles/Rods (249)
    - Other (94)
  - Injection Moulding (1.594)
  - Blow Moulding (485)
  - PUR (276)
  - Other (1.068)
    - General (114)
    - Foam (298)
    - Composites/Thermosets (328)
    - Thermoforming (203)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (230)
- Application (6.786)
  - General (124)
  - Packaging (2.917)
  - Construction (676)
  - Automotive / Transport (1.554)
  - Electrical Appliances (318)
  - Consumer Goods (632)
  - Medical (368)
  - Technical (197)
- Other (1.687)
  - Recycling/Disposal (1.374)
  - Services (242)
  - Logistics (71)
Commercial Register (102)
- Insolvency (97)
- Changes (5)
Markets (21.379)
- Polymer Materials (9.281)
  - Petrochemicals (2.257)
  - Charge (817)
    - General (38)
    - Masterbatches (89)
    - Additives (324)
    - Colours (148)
    - Reinforcements/Fillers (218)
  - Polymers (5.854)
    - General (656)
    - Standard Thermoplastics (2.256)
      - General (73)
      - Polyolefins (1.118)
      - Polystyrenes (147)
      - PVC (467)
      - Polyester (321)
      - Expandable (PS, PP, PE) (130)
    - Technical Thermoplastics (1.208)
      - General (86)
      - Styrene Copolymers (97)
      - PC/PMMA (139)
      - Polyamides (414)
      - POM/PBT/PP (104)
      - Technical Compounds (368)
    - PUR (429)
    - Other (1.305)
      - General (42)
      - Composites/Thermosets (285)
      - High Performance (291)
      - Biopolymers (406)
      - Elastomers/TPE (132)
      - Recyclate (149)
  - Other Materials (57)
  - Distribution (296)
- Machinery (492)
  - General (127)
  - Plant Construction (14)
  - Core Machines (280)
    - General (105)
    - Extrusion (35)
    - Injection Moulding (119)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.616)
  - General (393)
  - Extrusion (591)
    - General (20)
    - Flexible Films (288)
    - Rigid Films/Sheets (114)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (10)
  - Injection Moulding (174)
  - Blow Moulding (43)
  - PUR (75)
  - Other (296)
    - General (20)
    - Foam (75)
    - Composites/Thermosets (135)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.707)
  - General (33)
  - Packaging (1.771)
  - Construction (283)
  - Automotive / Transport (885)
  - Electrical Appliances (211)
  - Consumer Goods (233)
  - Medical (192)
  - Technical (55)
  - Other (44)
- Regions and Countries (3.948)
  - World (193)
  - German-speaking Countries (461)
  - Europe (1.900)
    - General (452)
    - Italy (139)
    - France (153)
    - Spain/Portugal (94)
    - Great Britain/Ireland (495)
    - Low Countries (74)
    - Central Europe (171)
    - Scandinavia (43)
    - Russia (97)
    - Eastern Europe (44)
    - Southeastern Europe (138)
  - North America (472)
  - Asia (665)
    - General (117)
    - China (388)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (140)
  - Other (37)
  - South America (80)
- Other (2.335)
  - Recycling/Disposal (1.779)
  - Economic Trend (294)
  - Services (40)
  - Logistics (172)
  - Energy (50)
Production and Engineering (3.570)
- Polymer Materials (2.237)
  - Petrochemicals (52)
  - Charge (425)
    - General (12)
    - Masterbatches (108)
    - Additives (217)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.730)
    - General (27)
    - Standard Themoplastics (348)
    - Technical Thermoplastics (584)
      - General (19)
      - Styrene Copolymers (61)
      - PC/PMMA (62)
      - Polyamides (198)
      - POM/PBT/PP (65)
      - Technical Compounds (179)
    - PUR (66)
    - Other (705)
      - General (21)
      - Composites/Thermosets (105)
      - High Performance (158)
      - Biopolymers (226)
      - Elastomers/TPE (107)
      - Recyclate (88)
  - Other (30)
- Machinery (93)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (32)
- Research (402)
  - Polymer Materials (135)
  - Technical (12)
  - Product Development (39)
  - Process (78)
  - Application (86)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (48)
- New Products (800)
  - Packaging (522)
  - Construction (33)
  - Automotive / Transport (97)
  - Electrical Appliances (25)
  - Consumer Goods (46)
  - Medical (35)
  - Technical (7)
  - Other (35)
- Other (38)
Management (577)
- Purchasing (96)
- General Management (118)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (85)
- Logistics (214)
People (1.448)
Industry (5.374)
- General (1.085)
- Associations/Institutions (2.086)
- Legislation (1.110)
- Environment / Health (1.083)
- plas.TV - Plastics unite(d) (10)
Events (1.106)
Plastic Fantastic (495)
Commentaries (75)
Interviews (120)
Notes by Publisher (68)