Show topic list

Production and Engineering Polymers Other

FUJI XEROX Plant and wood-derived biomass plastics developed / Applications in interior mechanical copier components	26.09.2011
BIOPLASTICS Austrian recycler Ecoplast sceptical about bags made of degradable plastics / “Material cannot be recycled”	21.09.2011
BAYER MATERIALSCIENCE Three new medical TPUs introduced	31.08.2011
RTP Glass fibre-reinforced bioplastic PLA with improved strength and thermal performance / Injection moulding cycle times reduced	23.08.2011
FIBRECYCLE UK UK carbon fibre recovery project develops low-cost yarns and fabrics / High performance from recycled materials	22.08.2011
TEKNOR APEX High bio-content PLA is introduced / A new environmental alternative to PP and PS?	19.08.2011
FKUR Introducing the new “Biograde V 2091” transparent injection mouldable grade	18.08.2011
STYROCHEM Biodegradable EPS is launched	17.08.2011
KURARAY Collaboration with Amyris to develop high performance polymers from renewable feedstocks / Exclusive supply agreement following completion of technical programme	17.08.2011
ALLIANCE POLYMERS Distribution of Nantong Polymax's “Maxelast” D-series of thermoplastic elastomers	11.08.2011
LAMILUX Introducing the world's first large-scale CFRP production using the continuous manufacturing process / Designed for automotive applications	03.08.2011
DSM ENGINEERING PLASTICS Fiat approves “Arnitel” TPC for air duct applications	27.07.2011
KANEKA Trial production of new plant oil-based polyester biopolymer / “Aonilex” output to be ramped up successively to 10,000 t/y	06.06.2011
POLYONE Carbon nanotube portfolio unveiled at “Brasilplast 2011”	25.05.2011
DSM Cooperation with Elevance Renewable Sciences on bio-based high performance thermoplastics	19.05.2011
DOW CHEMICAL Polyolefin elastomer grade introduced for automotive TPOs	16.05.2011
SOLVAY ADVANCED POLYMERS Films down to six microns achieved from PAEK grade / Advantages claimed over PEEK in similar applications	13.05.2011
POLYONE Non-halogenated TPEs introduced at Brasilplast 2011	12.05.2011
CRAY VALLEY Bio-sourced unsaturated polyester resin range launched in Europe	21.04.2011
SOLVAY ADVANCED POLYMERS New PEEK grade for wire and cable applications	18.04.2011
EVONIK Internally lubricated PPA increases gearbox efficiency	15.04.2011
ASHLAND New acrylic structural adhesives launched in Europe	12.04.2011
BAYER MATERIALSCIENCE PU solutions for composites displayed at JEC show in Paris / Automotive applications in focus	30.03.2011
HEXCEL Light weight PU system for ski manufacture	16.02.2011
BIOBENT New bioplastics range claimed to compete on cost with traditional resins	09.02.2011

Seite 22 von 28

Topic search

Plastics Information Europe

Polymer Prices (5.680)
- Petrochemicals (384)
- Standard Thermoplastics (883)
- PET (235)
- Engineering Thermoplastics (240)
- Recyclate (339)
  - Standard Thermoplastics / Recyclate (169)
  - Engineering Thermoplastics / Recyclate (170)
- Polyurethanes (232)
- High Performance Polymers (2)
- Composites (168)
- Announcements (2.540)
- World Regions (541)
  - China (264)
    - Standard Thermoplastics (133)
    - Engineering Thermoplastics (131)
  - North America (153)
  - Russia (124)
- Spot Prices (111)
- Forecasts (5)
Companies (32.059)
- Polymer Materials (15.877)
  - Petrochemicals (2.854)
  - Charge (1.757)
    - General (88)
    - Masterbatches (328)
    - Additives (728)
    - Colours (355)
    - Reinforcements/Fillers (258)
  - Polymers (10.165)
    - General (644)
    - Standard Thermoplastics (3.521)
      - General (112)
      - Polyolefins (1.773)
      - Polystyrenes (315)
      - PVC (620)
      - Polyester (519)
      - Expandable (PS, PP, PE) (182)
    - Technical Thermoplastics (3.030)
      - General (341)
      - Styrene Copolymers (241)
      - PC/PMMA (417)
      - Polyamides (834)
      - POM/PBT/PP (297)
      - Technical Compounds (900)
    - PUR (731)
    - Other (2.239)
      - General (95)
      - Composites/Thermosets (387)
      - High Performance (567)
      - Biopolymers (653)
      - Elastomers/TPE (342)
      - Recyclate (195)
  - Distribution (1.101)
- Machinery (1.043)
  - General (26)
  - Plant Construction (127)
  - Core Machines (715)
    - General (85)
    - Extrusion (174)
    - Injection Moulding (353)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (171)
    - General (30)
    - Control Systems (4)
    - Automatisation (32)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.677)
  - General (831)
  - Extrusion (2.199)
    - General (110)
    - Flexible Films (1.058)
    - Rigid Films/Sheet (358)
    - Pipes (330)
    - Profiles/Rods (249)
    - Other (94)
  - Injection Moulding (1.592)
  - Blow Moulding (484)
  - PUR (273)
  - Other (1.068)
    - General (114)
    - Foam (298)
    - Composites/Thermosets (328)
    - Thermoforming (203)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (230)
- Application (6.778)
  - General (124)
  - Packaging (2.913)
  - Construction (674)
  - Automotive / Transport (1.553)
  - Electrical Appliances (318)
  - Consumer Goods (631)
  - Medical (368)
  - Technical (197)
- Other (1.684)
  - Recycling/Disposal (1.372)
  - Services (242)
  - Logistics (70)
Commercial Register (102)
- Insolvency (97)
- Changes (5)
Markets (21.351)
- Polymer Materials (9.269)
  - Petrochemicals (2.254)
  - Charge (817)
    - General (38)
    - Masterbatches (89)
    - Additives (324)
    - Colours (148)
    - Reinforcements/Fillers (218)
  - Polymers (5.845)
    - General (653)
    - Standard Thermoplastics (2.252)
      - General (73)
      - Polyolefins (1.115)
      - Polystyrenes (147)
      - PVC (467)
      - Polyester (320)
      - Expandable (PS, PP, PE) (130)
    - Technical Thermoplastics (1.208)
      - General (86)
      - Styrene Copolymers (97)
      - PC/PMMA (139)
      - Polyamides (414)
      - POM/PBT/PP (104)
      - Technical Compounds (368)
    - PUR (428)
    - Other (1.304)
      - General (42)
      - Composites/Thermosets (285)
      - High Performance (290)
      - Biopolymers (406)
      - Elastomers/TPE (132)
      - Recyclate (149)
  - Other Materials (57)
  - Distribution (296)
- Machinery (492)
  - General (127)
  - Plant Construction (14)
  - Core Machines (280)
    - General (105)
    - Extrusion (35)
    - Injection Moulding (119)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.615)
  - General (393)
  - Extrusion (590)
    - General (20)
    - Flexible Films (287)
    - Rigid Films/Sheets (114)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (10)
  - Injection Moulding (174)
  - Blow Moulding (43)
  - PUR (75)
  - Other (296)
    - General (20)
    - Foam (75)
    - Composites/Thermosets (135)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.698)
  - General (33)
  - Packaging (1.765)
  - Construction (282)
  - Automotive / Transport (884)
  - Electrical Appliances (211)
  - Consumer Goods (232)
  - Medical (192)
  - Technical (55)
  - Other (44)
- Regions and Countries (3.947)
  - World (193)
  - German-speaking Countries (461)
  - Europe (1.900)
    - General (452)
    - Italy (139)
    - France (153)
    - Spain/Portugal (94)
    - Great Britain/Ireland (495)
    - Low Countries (74)
    - Central Europe (171)
    - Scandinavia (43)
    - Russia (97)
    - Eastern Europe (44)
    - Southeastern Europe (138)
  - North America (471)
  - Asia (665)
    - General (117)
    - China (388)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (140)
  - Other (37)
  - South America (80)
- Other (2.330)
  - Recycling/Disposal (1.776)
  - Economic Trend (293)
  - Services (40)
  - Logistics (171)
  - Energy (50)
Production and Engineering (3.570)
- Polymer Materials (2.237)
  - Petrochemicals (52)
  - Charge (425)
    - General (12)
    - Masterbatches (108)
    - Additives (217)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.730)
    - General (27)
    - Standard Themoplastics (348)
    - Technical Thermoplastics (584)
      - General (19)
      - Styrene Copolymers (61)
      - PC/PMMA (62)
      - Polyamides (198)
      - POM/PBT/PP (65)
      - Technical Compounds (179)
    - PUR (66)
    - Other (705)
      - General (21)
      - Composites/Thermosets (105)
      - High Performance (158)
      - Biopolymers (226)
      - Elastomers/TPE (107)
      - Recyclate (88)
  - Other (30)
- Machinery (93)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (32)
- Research (402)
  - Polymer Materials (135)
  - Technical (12)
  - Product Development (39)
  - Process (78)
  - Application (86)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (48)
- New Products (800)
  - Packaging (522)
  - Construction (33)
  - Automotive / Transport (97)
  - Electrical Appliances (25)
  - Consumer Goods (46)
  - Medical (35)
  - Technical (7)
  - Other (35)
- Other (38)
Management (575)
- Purchasing (95)
- General Management (118)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (85)
- Logistics (213)
People (1.448)
Industry (5.360)
- General (1.085)
- Associations/Institutions (2.080)
- Legislation (1.107)
- Environment / Health (1.078)
- plas.TV - Plastics unite(d) (10)
Events (1.105)
Plastic Fantastic (495)
Commentaries (75)
Interviews (119)
Notes by Publisher (68)