www.pieweb.com

Industry Environment / Health

US PET MARKET
Circular market woefully lacking / Consultants draw roadmap for transformation by 2040
05.12.2024
UN PLASTICS TREATY
No consensus after Busan talks / Petchem industry accused of ‘unsupportive' behaviour / Rising endorsement of production caps / Further session planned
04.12.2024
FOOTWEAR
Aimplas develops 3D-printing material from scrap shoe leather
29.11.2024
PACKAGING EUROPE
PPWR corrigendum officially approved by MEPs / Regulation expected to enter into force at start of 2025
28.11.2024
SWEDEN
Industry praises cancellation of plastic bag tax / Move could bolster competitiveness against imports / Abolishment not expected to affect plastics waste management
26.11.2024
ENVALIOR
Launch of high-performance composites, sustainable PBT compounds / Producer announces sustainability ambitions
26.11.2024
WASTE EXPORTS
UK shipments to Turkey on the rise again / 60% increase between 2022 and 2023 – Greenpeace
20.11.2024
CHEMICAL RECYCLING
UK government accepts use of mass balance to verify chemically recycled plastics for packaging tax / EU member states show support, EC mulls it over
12.11.2024
ECHA
SVHC list extended to include flame retardant triphenyl phosphate
12.11.2024
PACKAGING GERMANY
German federal environment agency considers special levy on dairy-product packaging / Decision receives harsh criticism from associations
11.11.2024
PLASTICS AND ENVIRONMENT
Global partnership EPPIC receives fresh funding of USD 14 mn from US Department of State for fight against plastics pollution / Further support by Trump unlikely
07.11.2024
PLASTICS AND ENVIRONMENT
Report calls for ban on UK waste exports / Current system ‘causes waste colonialism' – EIA
06.11.2024
PACKAGING UK
Government urged to help reduce packaging use, facilitate recycling / LGA calls for review of moves to cut EPR fees
05.11.2024
POLYPLASTICS
POM grades with short cellulose fibre reinforcement in development
04.11.2024
MICROPLASTICS
Veolia to test detection tech at Swiss PET recycling plant
31.10.2024
BASF
PA 6, TPU grades with low-carbon footprint / Ultramid ZeroPCF to achieve net-zero greenhouse gas emissions
30.10.2024
COP29
EU Parliament, Council formulate goals for climate conference / Tough negotiations expected / Financing to be thorny issue
25.10.2024
PLASTICS AND HEALTH
Study finds carcinogenic flame retardants in black plastics / E-waste recycling targeted
23.10.2024
PVC
Scientists develop novel method to make PVC products more durable / New method may mean less microplastics pollution
22.10.2024
RESEARCH
Aimplas to investigate algae-to-plastics potential as part of Ruguplas initiative
22.10.2024
PFAS
EPA orders four producers to clarify toxicity of fluorotelomer acrylate / UK behind on regulating ‘forever chemicals'
21.10.2024
PLASTICS AND ENVIRONMENT
No link between plastic packaging and microplastic ingestion / Potential connection with highly processed food – Plastics Europe study
17.10.2024
PFAS
New substances proposed for enhanced regulation in US / Upgrade of toxic chemical release inventory
14.10.2024
IRELAND
Ongoing circular economy challenges / Investment, collaboration essential – report
11.10.2024
PLASTICS AND ENVIRONMENT
Pollution must be reduced 32% by 2035 to prevent further marine damage – study
08.10.2024
Seite 1 von 47
Topic search
Plastics Information Europe
  • Polymer Prices (5.858)
    • Petrochemicals (430)
    • Standard Thermoplastics (924)
    • PET (242)
    • Engineering Thermoplastics (248)
    • Recyclate (353)
      • Standard Thermoplastics / Recyclate (176)
      • Engineering Thermoplastics / Recyclate (177)
    • Polyurethanes (239)
    • High Performance Polymers (2)
    • Composites (176)
    • Announcements (2.559)
    • World Regions (563)
      • China (278)
        • Standard Thermoplastics (140)
        • Engineering Thermoplastics (138)
      • North America (161)
      • Russia (124)
    • Spot Prices (118)
    • Forecasts (4)
  • Companies (33.327)
    • Polymer Materials (16.524)
      • Petrochemicals (2.964)
      • Charge (1.800)
        • General (89)
        • Masterbatches (332)
        • Additives (751)
        • Colours (367)
        • Reinforcements/Fillers (261)
      • Polymers (10.621)
        • General (673)
        • Standard Thermoplastics (3.679)
          • General (113)
          • Polyolefins (1.868)
          • Polystyrenes (323)
          • PVC (644)
          • Polyester (544)
          • Expandable (PS, PP, PE) (187)
        • Technical Thermoplastics (3.137)
          • General (348)
          • Styrene Copolymers (252)
          • PC/PMMA (443)
          • Polyamides (862)
          • POM/PBT/PP (306)
          • Technical Compounds (926)
        • PUR (766)
        • Other (2.366)
          • General (100)
          • Composites/Thermosets (400)
          • High Performance (589)
          • Biopolymers (683)
          • Elastomers/TPE (358)
          • Recyclate (236)
      • Distribution (1.139)
    • Machinery (1.065)
      • General (27)
      • Plant Construction (130)
      • Core Machines (731)
        • General (88)
        • Extrusion (176)
        • Injection Moulding (364)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (173)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.875)
      • General (860)
      • Extrusion (2.266)
        • General (112)
        • Flexible Films (1.093)
        • Rigid Films/Sheet (368)
        • Pipes (341)
        • Profiles/Rods (255)
        • Other (97)
      • Injection Moulding (1.650)
      • Blow Moulding (492)
      • PUR (288)
      • Other (1.086)
        • General (114)
        • Foam (302)
        • Composites/Thermosets (336)
        • Thermoforming (209)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (233)
    • Application (7.044)
      • General (125)
      • Packaging (3.041)
      • Construction (697)
      • Automotive / Transport (1.617)
      • Electrical Appliances (327)
      • Consumer Goods (654)
      • Medical (379)
      • Technical (204)
    • Other (1.819)
      • Recycling/Disposal (1.469)
      • Services (248)
      • Logistics (102)
  • Commercial Register (111)
    • Insolvency (106)
    • Changes (5)
  • Markets (22.313)
    • Polymer Materials (9.677)
      • Petrochemicals (2.353)
      • Charge (834)
        • General (38)
        • Masterbatches (90)
        • Additives (331)
        • Colours (153)
        • Reinforcements/Fillers (222)
      • Polymers (6.120)
        • General (722)
        • Standard Thermoplastics (2.354)
          • General (74)
          • Polyolefins (1.165)
          • Polystyrenes (154)
          • PVC (488)
          • Polyester (338)
          • Expandable (PS, PP, PE) (135)
        • Technical Thermoplastics (1.237)
          • General (87)
          • Styrene Copolymers (101)
          • PC/PMMA (146)
          • Polyamides (421)
          • POM/PBT/PP (107)
          • Technical Compounds (375)
        • PUR (444)
        • Other (1.363)
          • General (46)
          • Composites/Thermosets (288)
          • High Performance (293)
          • Biopolymers (422)
          • Elastomers/TPE (137)
          • Recyclate (177)
      • Other Materials (57)
      • Distribution (313)
    • Machinery (501)
      • General (127)
      • Plant Construction (14)
      • Core Machines (289)
        • General (109)
        • Extrusion (36)
        • Injection Moulding (123)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.643)
      • General (405)
      • Extrusion (598)
        • General (20)
        • Flexible Films (292)
        • Rigid Films/Sheets (116)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (177)
      • Blow Moulding (43)
      • PUR (77)
      • Other (299)
        • General (20)
        • Foam (77)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.912)
      • General (37)
      • Packaging (1.887)
      • Construction (297)
      • Automotive / Transport (934)
      • Electrical Appliances (213)
      • Consumer Goods (243)
      • Medical (198)
      • Technical (56)
      • Other (47)
    • Regions and Countries (4.019)
      • World (194)
      • German-speaking Countries (472)
      • Europe (1.945)
        • General (465)
        • Italy (142)
        • France (155)
        • Spain/Portugal (97)
        • Great Britain/Ireland (502)
        • Low Countries (74)
        • Central Europe (173)
        • Scandinavia (44)
        • Russia (107)
        • Eastern Europe (46)
        • Southeastern Europe (140)
      • North America (482)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (141)
      • Other (37)
      • South America (81)
    • Other (2.561)
      • Recycling/Disposal (1.915)
      • Economic Trend (345)
      • Services (41)
      • Logistics (204)
      • Energy (56)
  • Production and Engineering (3.709)
    • Polymer Materials (2.315)
      • Petrochemicals (55)
      • Charge (436)
        • General (14)
        • Masterbatches (111)
        • Additives (223)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.794)
        • General (30)
        • Standard Themoplastics (357)
        • Technical Thermoplastics (593)
          • General (19)
          • Styrene Copolymers (62)
          • PC/PMMA (62)
          • Polyamides (203)
          • POM/PBT/PP (67)
          • Technical Compounds (180)
        • PUR (72)
        • Other (742)
          • General (21)
          • Composites/Thermosets (107)
          • High Performance (159)
          • Biopolymers (240)
          • Elastomers/TPE (113)
          • Recyclate (102)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (422)
      • Polymer Materials (140)
      • Technical (13)
      • Product Development (40)
      • Process (81)
      • Application (89)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (55)
    • New Products (840)
      • Packaging (550)
      • Construction (34)
      • Automotive / Transport (99)
      • Electrical Appliances (26)
      • Consumer Goods (49)
      • Medical (37)
      • Technical (7)
      • Other (38)
    • Other (38)
  • Management (638)
    • Purchasing (100)
    • General Management (137)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (88)
    • Logistics (249)
  • People (1.476)
  • Industry (5.754)
    • General (1.140)
    • Associations/Institutions (2.215)
    • Legislation (1.215)
    • Environment / Health (1.174)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.122)
  • Plastic Fantastic (523)
  • Commentaries (78)
  • Interviews (131)
  • Notes by Publisher (69)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 11/12/2024
Ref: ogmtch55etozch55k11y343c
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_253691&node=100545