www.pieweb.com

Polymer Prices China Engineering Thermoplastics

POLYMER PRICES
China engineering thermoplastics January 2024: POM skyrockets amid low availability / Feedstock costs broadly higher / Demand muted ahead of holidays / February seen mixed
12.02.2024
POLYMER PRICES
China engineering thermoplastics December 2023: Softer costs, low demand push down most prices / Exceptions are PA 6, PMMA / Spring Festival to mute demand in February
10.01.2024
POLYMER PRICES
China engineering thermoplastics November 2023: Prices mostly lower due to softer feedstock cost, low demand, healthy supply / Only polyamides, POM up / December seen sideways to lower
12.12.2023
POLYMER PRICES
China engineering thermoplastics October 2023: Prices broadly lower as feedstocks take cue from softer crude oil / November prices expected to ease on softer demand
13.11.2023
POLYMER PRICES
China engineering thermoplastics September 2023: Expensive crude oil pushes polymer prices / National holiday paralyses demand in October / Unchanged to falling quotations expected
13.10.2023
POLYMER PRICES
China engineering thermoplastics August 2023: Prices mostly higher as feedstock prices firm, supply slows / Only PA 6.6, ABS lower amid higher supply or lower feedstock cost / Seasonal demand to support September prices
11.09.2023
POLYMER PRICES
China engineering thermoplastics July 2023: Weak demand pushes PA 6.6, PMMA, PBT prices lower / Other grades supported by higher feedstock prices or higher demand / August seen bullish
14.08.2023
POLYMER PRICES
China engineering thermoplastics June 2023: Prices down across the board / Feedstocks mostly lower / Lackluster buying as market enters summer lull / July seen softer
13.07.2023
POLYMER PRICES
China engineering thermoplastics May 2023: Ample supply, weak demand depress / Only PMMA, PBT firmer as feedstock costs firm / Downward trend to continue in June
16.06.2023
POLYMER PRICES
China engineering thermoplastics April 2023: Prices of most thermoplastics lower due to ample supply and low demand / Only PMMA and PBT prices up / May prices seen as mixed
12.05.2023
POLYMER PRICES
China engineering thermoplastics March 2023: Weak domestic demand weighs on prices / Further markdowns in April likely, except for PA 6, POM / Capacity utilisation of production plants still low in many cases
12.04.2023
POLYMER PRICES
China engineering thermoplastics February 2023: Prices mostly sideways to lower / Post-holiday demand recovery slower than expected / Feedstock prices higher, BDO's massive jump drives PBT up sharply / Outlook mixed
15.03.2023
POLYMER PRICES
China engineering thermoplastics January 2023: Prices mixed / POM, PBT, PA 6 follow feedstocks higher / Spring Festival mutes demand / Upswing expected
15.02.2023
POLYMER PRICES
China engineering thermoplastics December 2022: Prices fall across the board / Low downstream demand / Feedstock prices softer / Chinese New Year to curtail upswing
13.01.2023
POLYMER PRICES
China engineering thermoplastics November 2022: Prices down across the board amid cheaper feedstocks / Operation rates for PC, PA 6 down / December seen weak despite lifting of Covid-19 restrictions
13.12.2022
POLYMER PRICES
China engineering thermoplastics October 2022: Prices for some engineering thermoplastics rebound / Textile sector low / Most types projected to see a drop in November
14.11.2022
POLYMER PRICES
China engineering thermoplastics September 2022: Prices of some polymers rebounded / Demand recovered / Automotive sector strengthening
11.10.2022
POLYMER PRICES
China engineering thermoplastics August 2022: Prices largely lower / Demand worse than expected / Feedstock price drop / Power Shortages / September seen mixed
14.09.2022
POLYMER PRICES
China engineering thermoplastics July 2022: Prices tumble across the board / Generally low demand and softer feedstock prices / Markets expected to be weak in August
17.08.2022
POLYMER PRICES
China engineering thermoplastics June 2022: Prices broadly lower amid low demand, healthy supply / Some public health restrictions lifted / July to be weak with few exceptions
13.07.2022
POLYMER PRICES
China engineering thermoplastics May 2022: Higher feedstock costs due to expensive crude oil / Generally low demand leads to broad decreases / Lockdowns eased / Mixed picture for June
14.06.2022
POLYMER PRICES
China engineering thermoplastics April 2022: Decrease in prices of most types / Generally low demand / Higher MMA cost and low supply pushed PMMA / Covid-related lockdowns continue to have an impact
12.05.2022
POLYMER PRICES
China engineering thermoplastics March 2022: Rising feedstock costs push prices broadly higher / Only PA softer / Demand muted as a result of Covid-19 outbreaks / April seen mostly softer
12.04.2022
POLYMER PRICES
China engineering thermoplastics February 2022: Prices sideways to down as low demand continues after holidays / Prices set to trend lower
14.03.2022
POLYMER PRICES
China engineering thermoplastics January 2022: Prices mostly lower amid soft demand and healthy supply / Only POM and PA 6 up / February holidays to push quotations further down
09.02.2022
Seite 1 von 6
Topic search
Plastics Information Europe
  • Polymer Prices (5.610)
    • Petrochemicals (364)
    • Standard Thermoplastics (872)
    • PET (232)
    • Engineering Thermoplastics (238)
    • Recyclate (335)
      • Standard Thermoplastics / Recyclate (167)
      • Engineering Thermoplastics / Recyclate (168)
    • Polyurethanes (230)
    • High Performance Polymers (2)
    • Composites (166)
    • Announcements (2.527)
    • World Regions (535)
      • China (260)
        • Standard Thermoplastics (131)
        • Engineering Thermoplastics (129)
      • North America (151)
      • Russia (124)
    • Spot Prices (109)
  • Companies (31.720)
    • Polymer Materials (15.696)
      • Petrochemicals (2.815)
      • Charge (1.737)
        • General (87)
        • Masterbatches (326)
        • Additives (722)
        • Colours (350)
        • Reinforcements/Fillers (252)
      • Polymers (10.049)
        • General (638)
        • Standard Thermoplastics (3.476)
          • General (112)
          • Polyolefins (1.744)
          • Polystyrenes (312)
          • PVC (615)
          • Polyester (511)
          • Expandable (PS, PP, PE) (182)
        • Technical Thermoplastics (3.001)
          • General (339)
          • Styrene Copolymers (240)
          • PC/PMMA (412)
          • Polyamides (823)
          • POM/PBT/PP (294)
          • Technical Compounds (893)
        • PUR (724)
        • Other (2.210)
          • General (94)
          • Composites/Thermosets (386)
          • High Performance (561)
          • Biopolymers (644)
          • Elastomers/TPE (338)
          • Recyclate (187)
      • Distribution (1.095)
    • Machinery (1.041)
      • General (26)
      • Plant Construction (127)
      • Core Machines (714)
        • General (84)
        • Extrusion (174)
        • Injection Moulding (353)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (170)
        • General (30)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (91)
        • Components (13)
      • Finishing (4)
    • Processing (6.632)
      • General (821)
      • Extrusion (2.187)
        • General (110)
        • Flexible Films (1.049)
        • Rigid Films/Sheet (357)
        • Pipes (328)
        • Profiles/Rods (249)
        • Other (94)
      • Injection Moulding (1.580)
      • Blow Moulding (482)
      • PUR (271)
      • Other (1.063)
        • General (114)
        • Foam (295)
        • Composites/Thermosets (327)
        • Thermoforming (202)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (228)
    • Application (6.712)
      • General (123)
      • Packaging (2.880)
      • Construction (669)
      • Automotive / Transport (1.537)
      • Electrical Appliances (317)
      • Consumer Goods (626)
      • Medical (367)
      • Technical (193)
    • Other (1.639)
      • Recycling/Disposal (1.340)
      • Services (239)
      • Logistics (60)
  • Commercial Register (98)
    • Insolvency (93)
    • Changes (5)
  • Markets (21.087)
    • Polymer Materials (9.154)
      • Petrochemicals (2.216)
      • Charge (807)
        • General (38)
        • Masterbatches (88)
        • Additives (324)
        • Colours (145)
        • Reinforcements/Fillers (212)
      • Polymers (5.782)
        • General (639)
        • Standard Thermoplastics (2.235)
          • General (73)
          • Polyolefins (1.105)
          • Polystyrenes (145)
          • PVC (465)
          • Polyester (317)
          • Expandable (PS, PP, PE) (130)
        • Technical Thermoplastics (1.194)
          • General (86)
          • Styrene Copolymers (97)
          • PC/PMMA (138)
          • Polyamides (408)
          • POM/PBT/PP (103)
          • Technical Compounds (362)
        • PUR (424)
        • Other (1.290)
          • General (41)
          • Composites/Thermosets (283)
          • High Performance (288)
          • Biopolymers (401)
          • Elastomers/TPE (132)
          • Recyclate (145)
      • Other Materials (57)
      • Distribution (292)
    • Machinery (492)
      • General (127)
      • Plant Construction (14)
      • Core Machines (280)
        • General (105)
        • Extrusion (35)
        • Injection Moulding (119)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.609)
      • General (387)
      • Extrusion (589)
        • General (20)
        • Flexible Films (287)
        • Rigid Films/Sheets (113)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (75)
      • Other (297)
        • General (21)
        • Foam (75)
        • Composites/Thermosets (135)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.655)
      • General (33)
      • Packaging (1.740)
      • Construction (280)
      • Automotive / Transport (873)
      • Electrical Appliances (210)
      • Consumer Goods (229)
      • Medical (192)
      • Technical (54)
      • Other (44)
    • Regions and Countries (3.927)
      • World (193)
      • German-speaking Countries (455)
      • Europe (1.891)
        • General (447)
        • Italy (139)
        • France (153)
        • Spain/Portugal (94)
        • Great Britain/Ireland (494)
        • Low Countries (74)
        • Central Europe (171)
        • Scandinavia (43)
        • Russia (95)
        • Eastern Europe (44)
        • Southeastern Europe (137)
      • North America (471)
      • Asia (660)
        • General (117)
        • China (386)
        • Japan (49)
        • Korea (26)
        • India (82)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.250)
      • Recycling/Disposal (1.736)
      • Economic Trend (277)
      • Services (40)
      • Logistics (159)
      • Energy (38)
  • Production and Engineering (3.534)
    • Polymer Materials (2.221)
      • Petrochemicals (52)
      • Charge (422)
        • General (12)
        • Masterbatches (107)
        • Additives (216)
        • Colours (52)
        • Reinforcements/Fillers (35)
      • Polymers (1.718)
        • General (27)
        • Standard Themoplastics (346)
        • Technical Thermoplastics (582)
          • General (19)
          • Styrene Copolymers (60)
          • PC/PMMA (62)
          • Polyamides (197)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (697)
          • General (21)
          • Composites/Thermosets (104)
          • High Performance (158)
          • Biopolymers (226)
          • Elastomers/TPE (106)
          • Recyclate (82)
      • Other (29)
    • Machinery (93)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (32)
    • Research (397)
      • Polymer Materials (134)
      • Technical (12)
      • Product Development (39)
      • Process (78)
      • Application (84)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (46)
    • New Products (785)
      • Packaging (507)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (25)
      • Consumer Goods (46)
      • Medical (35)
      • Technical (7)
      • Other (35)
    • Other (38)
  • Management (554)
    • Purchasing (92)
    • General Management (115)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (6)
    • Finances (83)
    • Logistics (201)
  • People (1.439)
  • Industry (5.245)
    • General (1.067)
    • Associations/Institutions (2.033)
    • Legislation (1.080)
    • Environment / Health (1.055)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.101)
  • Plastic Fantastic (490)
  • Commentaries (74)
  • Interviews (116)
  • Notes by Publisher (66)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 28/02/2024
Ref: 4hgbswfj4fx4rq55kjqwkd45
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_230120&node=100521