www.pieweb.com

Companies Polymers General

PETROCHEMICAL MARKETS
Ineos declares force majeure for PP from US plant in Texas – report
23.01.2024
EXXONMOBIL
Lawsuit seeks to block shareholder vote on emissions targets / Decision to bypass SEC could provide stark precedent
23.01.2024
BASF
Worse-than-expected fall in 2023 profits on write-downs and weaker sales / Impairments on energy unit Wintershall Dea hit net income
22.01.2024
BOREALIS
Two Belgian sites achieve zero pellet loss certification
22.01.2024
PETROCHEMICALS USA
Onset of winter cripples plants in Texas, Louisiana / Exports to Europe only affected to a small extent
18.01.2024
SABIC / LINDE
Firms seek to decarbonise ethylene glycol process / Saudi government joins carbon capture and storage thinktank
02.01.2024
YEAR-ENDER: CHEMICAL INDUSTRY
Better results likely in 2024 / Demand to remain soft / Firms send mixed messages
22.12.2023
YEAR-ENDER: EUROPEAN PLASTICS INDUSTRY
The plastics industry continues to work in a state of emergency / Slumps in demand, cheap imports and ever-new regulations make life difficult for producers and processors / Producers on the other side of the Atlantic also face more difficulties
20.12.2023
ARKEMA
Acquisition of Irish construction supplier Arc Building Products
20.12.2023
MULTILAYER FILM
New BASF-commissioned studies confirm recyclability of PA-containing waste / Results can inform European Design for Recycling
15.12.2023
LYONDELLBASELL
Supplier greenlights German chemical reclaim plant / UK distribution centre opens
23.11.2023
REPSOL
Chemicals' Q3 operating results weaker on stubbornly weak demand in Europe
13.11.2023
TOTALENERGIES
Refining and chemicals' operating income plummets 31% to September / Q3 sales shrink
10.11.2023
CHEMICAL INDUSTRY
Does Adnoc's potential takeover of Covestro mark the beginning of an M&A boom? / PIE interviews M&A expert, Carlos Robles y Zepf
09.11.2023
LG CHEM
South Korean firm establishes tech centre in Germany
25.09.2023
RECYCLASS
Norway‘s Norner accredited as certification body / In-mould label technology certified as compatible with rigid PP recycling stream
21.09.2023
PLAST
Italian fair reopens after five years / Visitor, exhibitor attendance lower than before pandemic / Market players mostly pessimistic / Green Deal or ‘Green Death?'
18.09.2023
INDIA
Plans with Saudi Arabia for Ratnagiri refinery to be accelerated / Resistance from locals
18.09.2023
NESTE
Deal with Japanese firms set to produce PET with renewable feedstock
31.08.2023
PLASTICS PROCESSING
German shops report record low competitiveness outside EU – ifo survey
24.08.2023
RECYCLING
Quintet forms European reclaim project / Group to focus on chemical process / Scope covers waste collection to resin production
10.08.2023
MITSUI CHEMICALS
Japanese cracker to use feedstock made from plastic waste
09.08.2023
CHINA
Typhoon Doksuri slows deliveries / Several Chinese ports closed
01.08.2023
SABIC
Resin maker studies capture of emissions data / Blockchain to play role in research
01.08.2023
INEOS
Court halts construction of Project One cracker / Move blamed on lack of environmental assessments / The beginning of the end?
24.07.2023
Seite 6 von 31
Topic search
Plastics Information Europe
  • Polymer Prices (6.535)
    • Petrochemicals (622)
    • Standard Thermoplastics (1.057)
    • PET (265)
    • Engineering Thermoplastics (273)
    • Recyclate (408)
      • General (6)
      • Standard Thermoplastics / Recyclate (201)
      • Engineering Thermoplastics / Recyclate (201)
    • Polyurethanes (265)
    • High Performance Polymers (2)
    • Composites (199)
    • Announcements (2.637)
    • World Regions (635)
      • China (326)
        • Standard Thermoplastics (164)
        • Engineering Thermoplastics (162)
      • North America (185)
      • Russia (124)
    • Spot Prices (142)
    • Forecasts (30)
  • Companies (37.264)
    • Polymer Materials (18.290)
      • Petrochemicals (3.331)
      • Charge (1.962)
        • General (102)
        • Masterbatches (347)
        • Additives (834)
        • Colours (402)
        • Reinforcements/Fillers (277)
      • Polymers (11.774)
        • General (758)
        • Standard Thermoplastics (4.089)
          • General (114)
          • Polyolefins (2.082)
          • Polystyrenes (365)
          • PVC (727)
          • Polyester (589)
          • Expandable (PS, PP, PE) (212)
        • Technical Thermoplastics (3.455)
          • General (354)
          • Styrene Copolymers (285)
          • PC/PMMA (491)
          • Polyamides (984)
          • POM/PBT/PP (341)
          • Technical Compounds (1.000)
        • PUR (833)
        • Other (2.639)
          • General (107)
          • Composites/Thermosets (420)
          • High Performance (661)
          • Biopolymers (726)
          • Elastomers/TPE (390)
          • Recyclate (335)
      • Distribution (1.223)
    • Machinery (1.148)
      • General (33)
      • Plant Construction (148)
      • Core Machines (771)
        • General (92)
        • Extrusion (184)
        • Injection Moulding (389)
        • Blow Moulding (73)
        • Foam (12)
        • PUR (17)
        • Compression Moulding (4)
      • Peripherals (190)
        • General (36)
        • Control Systems (4)
        • Automatisation (35)
        • Dies/Tools/Moulds (102)
        • Components (13)
      • Finishing (6)
    • Processing (7.629)
      • General (951)
      • Extrusion (2.474)
        • General (132)
        • Flexible Films (1.199)
        • Rigid Films/Sheet (398)
        • Pipes (367)
        • Profiles/Rods (265)
        • Other (113)
      • Injection Moulding (1.862)
      • Blow Moulding (555)
      • PUR (343)
      • Other (1.189)
        • General (137)
        • Foam (321)
        • Composites/Thermosets (364)
        • Thermoforming (234)
        • Rotational Moulding (36)
        • Additive Manufacturing (97)
      • Finishing (255)
    • Application (7.864)
      • General (147)
      • Packaging (3.389)
      • Construction (772)
      • Automotive / Transport (1.807)
      • Electrical Appliances (363)
      • Consumer Goods (726)
      • Medical (425)
      • Technical (235)
    • Other (2.333)
      • Recycling/Disposal (1.862)
      • Services (265)
      • Logistics (206)
  • Commercial Register (178)
    • Insolvency (172)
    • Changes (6)
  • Markets (25.487)
    • Polymer Materials (10.969)
      • Petrochemicals (2.709)
      • Charge (900)
        • General (43)
        • Masterbatches (100)
        • Additives (354)
        • Colours (166)
        • Reinforcements/Fillers (237)
      • Polymers (6.944)
        • General (913)
        • Standard Thermoplastics (2.609)
          • General (75)
          • Polyolefins (1.304)
          • Polystyrenes (171)
          • PVC (542)
          • Polyester (374)
          • Expandable (PS, PP, PE) (143)
        • Technical Thermoplastics (1.396)
          • General (92)
          • Styrene Copolymers (122)
          • PC/PMMA (167)
          • Polyamides (489)
          • POM/PBT/PP (118)
          • Technical Compounds (408)
        • PUR (489)
        • Other (1.537)
          • General (49)
          • Composites/Thermosets (309)
          • High Performance (319)
          • Biopolymers (446)
          • Elastomers/TPE (151)
          • Recyclate (263)
      • Other Materials (61)
      • Distribution (355)
    • Machinery (537)
      • General (134)
      • Plant Construction (15)
      • Core Machines (313)
        • General (119)
        • Extrusion (38)
        • Injection Moulding (133)
        • Blow Moulding (15)
        • PUR (6)
        • Compression Moulding (2)
      • Peripherals (75)
        • General (21)
        • Automatisation (18)
        • Dies/Tools/Moulds (36)
    • Processing (1.783)
      • General (487)
      • Extrusion (631)
        • General (20)
        • Flexible Films (307)
        • Rigid Films/Sheets (126)
        • Pipes (76)
        • Profiles/Rods (91)
        • Other (11)
      • Injection Moulding (183)
      • Blow Moulding (43)
      • PUR (84)
      • Other (310)
        • General (20)
        • Foam (82)
        • Composites/Thermosets (141)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (39)
      • Finishing (45)
    • Applications (4.526)
      • General (54)
      • Packaging (2.200)
      • Construction (360)
      • Automotive / Transport (1.049)
      • Electrical Appliances (238)
      • Consumer Goods (282)
      • Medical (218)
      • Technical (64)
      • Other (61)
    • Regions and Countries (4.274)
      • World (197)
      • German-speaking Countries (504)
      • Europe (2.109)
        • General (526)
        • Italy (152)
        • France (158)
        • Spain/Portugal (107)
        • Great Britain/Ireland (534)
        • Low Countries (75)
        • Central Europe (184)
        • Scandinavia (48)
        • Russia (119)
        • Eastern Europe (63)
        • Southeastern Europe (143)
      • North America (503)
      • Asia (684)
        • General (123)
        • China (394)
        • Japan (51)
        • Korea (28)
        • India (88)
      • Middle East (152)
      • Other (41)
      • South America (84)
    • Other (3.398)
      • Recycling/Disposal (2.386)
      • Economic Trend (573)
      • Services (44)
      • Logistics (306)
      • Energy (89)
  • Production and Engineering (3.886)
    • Polymer Materials (2.420)
      • Petrochemicals (66)
      • Charge (451)
        • General (15)
        • Masterbatches (116)
        • Additives (232)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.871)
        • General (32)
        • Standard Themoplastics (370)
        • Technical Thermoplastics (606)
          • General (20)
          • Styrene Copolymers (63)
          • PC/PMMA (64)
          • Polyamides (209)
          • POM/PBT/PP (69)
          • Technical Compounds (181)
        • PUR (76)
        • Other (787)
          • General (23)
          • Composites/Thermosets (108)
          • High Performance (163)
          • Biopolymers (255)
          • Elastomers/TPE (115)
          • Recyclate (123)
      • Other (32)
    • Machinery (95)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (32)
        • General (16)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (450)
      • Polymer Materials (146)
      • Technical (16)
      • Product Development (43)
      • Process (84)
      • Application (97)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (60)
    • New Products (881)
      • Packaging (578)
      • Construction (35)
      • Automotive / Transport (104)
      • Electrical Appliances (28)
      • Consumer Goods (51)
      • Medical (39)
      • Technical (8)
      • Other (38)
    • Other (40)
  • Management (865)
    • Purchasing (111)
    • General Management (216)
    • Company organisation (45)
    • Marketing/Sales (16)
    • Human Resources (8)
    • Finances (105)
    • Logistics (364)
  • People (1.521)
  • Industry (6.884)
    • General (1.328)
    • Associations/Institutions (2.608)
    • Legislation (1.562)
    • Environment / Health (1.376)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.204)
  • Plastic Fantastic (594)
  • Commentaries (90)
  • Interviews (170)
  • Notes by Publisher (85)
© 2026 by Plastics Information Europe, Bad Homburg
Date of print: 18/11/2026
Ref: spmutgsczc4jhah0pqrfil0z
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100434&page=6&pageid=302