Show topic list

Markets Polymer Materials

COMPOSITES INDUSTRY 50% of companies optimistic about future / Majority operating at 76% capacity or better / JEC poll	14.12.2020
IRELAND Bottle-to-bottle plastic recycling facility in Portlaoise / Launch of electric refuse-collection vehicles	14.12.2020
TOTAL CORBION Thomas Philipon replaces Stephane Dion as CEO	14.12.2020
K.D. FEDDERSEN Separation of distribution and compounding operations / Akro-Plastic to sell its own products	11.12.2020
PETROCHEMICAL MARKETS PA 6.6: After Ascend, BASF also allocates base polymers and compounds / Force majeure for Pensacola / Repairs to take up to four weeks	10.12.2020
POLYMER-GROUP Withdrawal from Polyblend / Focus on biopolymers / Film-like copolymers based on PLA	10.12.2020
EPS Covid-19 crisis leaves fewer scars on German-speaking region / Further consolidation among producers / Prices relatively low for a long time / Volatility likely to rise at end of year / Recycling gains importance	09.12.2020
TURKEY PET market: Value of exports set to nearly double in 2020 / Sharp drops seen for consumption, production, imports	09.12.2020
CHEMICAL INDUSTRY Pandemic hits EU 27 sales, output in first nine months / Circular economy can cushion economic blows	08.12.2020
PACKAGING RECYCLING UK cuts targets for plastics packaging recycling in 2021 and 2022 / Decision follows Valpak warning that pandemic could bankrupt some recyclers / Coronavirus impact may extend through 2022	08.12.2020
DSM Plastics activities bounce back in Q3, down year-on-year / Materials division sales volume off 6% / Annual growth in September	08.12.2020
TRINSEO Taiwanese TPE pilot plant begins operations	08.12.2020
BIOPLASTICS Development of degradable bioplastic film with tapioca starch	07.12.2020
TOTAL CORBION PLA Release of whitepaper on end-of-life options for PLA bioplastics / Call to recyclers for collaboration	07.12.2020
PETROCHEMICAL MARKETS Polyethylene: Full shutdown of Saudi Arabian olefin complex in Al Jubail / Prices react to outage	04.12.2020
FEEDSTOCK MARKETS PA 6.6: Ascend reports unplanned stoppage in Florida / Price upswing could accelerate	04.12.2020
DSM Project with Neste seeks to replace fossil-based feedstock	03.12.2020
PETROCHEMICAL MARKETS LDPE: Total declares force majeure on material from France	02.12.2020
CHEMICAL INDUSTRY Weaker demand dampens investment sentiment / Pandemic exacerbates downturn / Ethylene utilisation rates will likely remain weak / McKinsey report	02.12.2020
ASCEND Launch of more “HiDura” long-chain polyamides	02.12.2020
INEOS / SASOL Ineos to take 100% of Gemini HDPE joint venture for USD 404m	01.12.2020
PVC EU imposes punative tariffs on PVC from the US	01.12.2020
INVISTA Additional line for PA 6.6 base polymer starts up in Shanghai	01.12.2020
CLARIANT New structure to boost growth / Adjustments will cost 1,000 jobs / Focus on three businesses	30.11.2020
PETROCHEMICAL MARKETS Total declares force majeure for PS / Failure of Carling plant	27.11.2020

Seite 120 von 350

Topic search

Plastics Information Europe

Polymer Prices (6.417)
- Petrochemicals (587)
- Standard Thermoplastics (1.033)
- PET (261)
- Engineering Thermoplastics (269)
- Recyclate (399)
  - General (6)
  - Standard Thermoplastics / Recyclate (196)
  - Engineering Thermoplastics / Recyclate (197)
- Polyurethanes (261)
- High Performance Polymers (2)
- Composites (195)
- Announcements (2.628)
- World Regions (620)
  - China (316)
    - Standard Thermoplastics (159)
    - Engineering Thermoplastics (157)
  - North America (180)
  - Russia (124)
- Spot Prices (137)
- Forecasts (25)
Companies (36.513)
- Polymer Materials (17.979)
  - Petrochemicals (3.263)
  - Charge (1.937)
    - General (99)
    - Masterbatches (344)
    - Additives (818)
    - Colours (400)
    - Reinforcements/Fillers (276)
  - Polymers (11.571)
    - General (748)
    - Standard Thermoplastics (4.022)
      - General (114)
      - Polyolefins (2.043)
      - Polystyrenes (362)
      - PVC (709)
      - Polyester (584)
      - Expandable (PS, PP, PE) (210)
    - Technical Thermoplastics (3.392)
      - General (352)
      - Styrene Copolymers (276)
      - PC/PMMA (481)
      - Polyamides (963)
      - POM/PBT/PP (331)
      - Technical Compounds (989)
    - PUR (817)
    - Other (2.592)
      - General (105)
      - Composites/Thermosets (417)
      - High Performance (651)
      - Biopolymers (719)
      - Elastomers/TPE (385)
      - Recyclate (315)
  - Distribution (1.208)
- Machinery (1.130)
  - General (32)
  - Plant Construction (145)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (184)
    - General (34)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.480)
  - General (938)
  - Extrusion (2.427)
    - General (129)
    - Flexible Films (1.176)
    - Rigid Films/Sheet (391)
    - Pipes (359)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.821)
  - Blow Moulding (540)
  - PUR (337)
  - Other (1.168)
    - General (131)
    - Foam (317)
    - Composites/Thermosets (360)
    - Thermoforming (230)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (249)
- Application (7.695)
  - General (141)
  - Packaging (3.318)
  - Construction (759)
  - Automotive / Transport (1.770)
  - Electrical Appliances (355)
  - Consumer Goods (710)
  - Medical (416)
  - Technical (226)
- Other (2.229)
  - Recycling/Disposal (1.781)
  - Services (262)
  - Logistics (186)
Commercial Register (169)
- Insolvency (163)
- Changes (6)
Markets (24.968)
- Polymer Materials (10.765)
  - Petrochemicals (2.653)
  - Charge (891)
    - General (40)
    - Masterbatches (100)
    - Additives (350)
    - Colours (165)
    - Reinforcements/Fillers (236)
  - Polymers (6.812)
    - General (883)
    - Standard Thermoplastics (2.570)
      - General (74)
      - Polyolefins (1.284)
      - Polystyrenes (169)
      - PVC (532)
      - Polyester (368)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.365)
      - General (90)
      - Styrene Copolymers (118)
      - PC/PMMA (163)
      - Polyamides (477)
      - POM/PBT/PP (116)
      - Technical Compounds (401)
    - PUR (481)
    - Other (1.513)
      - General (47)
      - Composites/Thermosets (304)
      - High Performance (316)
      - Biopolymers (445)
      - Elastomers/TPE (150)
      - Recyclate (251)
  - Other Materials (61)
  - Distribution (348)
- Machinery (530)
  - General (134)
  - Plant Construction (15)
  - Core Machines (309)
    - General (119)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.773)
  - General (479)
  - Extrusion (629)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.408)
  - General (52)
  - Packaging (2.136)
  - Construction (347)
  - Automotive / Transport (1.028)
  - Electrical Appliances (231)
  - Consumer Goods (278)
  - Medical (214)
  - Technical (64)
  - Other (58)
- Regions and Countries (4.228)
  - World (197)
  - German-speaking Countries (502)
  - Europe (2.074)
    - General (511)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (528)
    - Low Countries (75)
    - Central Europe (182)
    - Scandinavia (47)
    - Russia (116)
    - Eastern Europe (61)
    - Southeastern Europe (143)
  - North America (499)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (150)
  - Other (40)
  - South America (83)
- Other (3.264)
  - Recycling/Disposal (2.306)
  - Economic Trend (544)
  - Services (41)
  - Logistics (287)
  - Energy (86)
Production and Engineering (3.852)
- Polymer Materials (2.401)
  - Petrochemicals (65)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.860)
    - General (32)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (75)
    - Other (778)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (827)
- Purchasing (109)
- General Management (203)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (345)
People (1.515)
Industry (6.707)
- General (1.300)
- Associations/Institutions (2.551)
- Legislation (1.498)
- Environment / Health (1.348)
- plas.TV - Plastics unite(d) (10)
Events (1.192)
Plastic Fantastic (583)
Commentaries (86)
Interviews (165)
Notes by Publisher (83)