www.pieweb.com

Markets Polymers General

PLASTICS INDUSTRY EUROPE
Recycling rates, circular content increase but incinerated volumes rise / Region's share of global production remains in decline – Plastics Europe
10.04.2024
PLASTICS AND ENVIRONMENT
Parliament's ENVI committee backs EU's Zero Pellet Loss proposal / NGOs not fully satisfied
02.04.2024
UK
BPF manifesto spells out federation's ‘shopping list' for whichever party wins next general election / Document calls for range of support initiatives
22.03.2024
CHEMICAL INDUSTRY GERMANY
Dramatic slump in sales, production in 2023 / Dim prospects also for year ahead
21.03.2024
PLASTICS INDUSTRY GERMANY
Production is going through a deep trough / Planned regulation will set course for the future – Plastics Europe
19.03.2024
POLYMERS FOR EUROPE ALLIANCE
Voting begins for Best Polymer Producers Awards / Decarbonisation as overarching category
13.03.2024
TURKEY
Plastic product consumption up in 2023 / Severe price drop for incoming, outgoing polymer shipments / Economic growth despite massive inflation
11.03.2024
EUROPEAN CHEMICAL INDUSTRY
Industry ends 2023 on “a weak note” / Production, exports, imports down compared with 2022 / Uptick in investor confidence
08.03.2024
COVESTRO
Plastics producer still in the red / Full-year revenues sink one-fifth as cost cuts partly arrest profit decline
01.03.2024
GERMAN CHEMICALS INDUSTRY
Business confidence stuck at low level – ifo / Thin backlog remains a problem
29.02.2024
EUROPEAN ECONOMY
Morale in German plastics industry deteriorates – ifo / Manufacturers voice further concerns / Brighter outlook for services in Germany, Europe
27.02.2024
EUROPEAN INDUSTRIAL DEAL
Antwerp industry summit proposes revised climate goals for EU / Brudermüller: “Urgent need to enhance Europe's competitiveness“ / Complement or counterweight to green agenda?
23.02.2024
FLEXIBLE PACKAGING
Polyethylene film prices trend higher / Biaxial-oriented materials move sideways / Demand remains muted
22.02.2024
COVESTRO
World's first bio-based aniline pilot plant starts operation / Process to be tested together with German academic partners
20.02.2024
COVESTRO
Takeover talks with Adnoc reportedly stalled
09.02.2024
ALBIS
Distributor launches sales company in Vietnam
09.02.2024
FREIGHT COSTS
Rising concerns about surcharges due to Red Sea crisis / Importers lose price leadership
07.02.2024
FORMOSA
US court reinstates air quality permit for Sunshine Project / Path to realisation remains long
31.01.2024
POLYMER MARKETS
What influence does the conflict in the Middle East have on the supply situation and polymer prices? / Interview with PIE price expert Martin Bäcker
30.01.2024
HUMANITARIAN AID
Global initiative issues recommendations for plastics packaging use
23.01.2024
PREMIX
Construction of US compounding plant on schedule / Production to start earlier than planned
23.01.2024
BOREALIS
Two Belgian sites achieve zero pellet loss certification
22.01.2024
PETROCHEMICALS USA
Onset of winter cripples plants in Texas, Louisiana / Exports to Europe only affected to a small extent
18.01.2024
EUROPEAN CHEMICAL INDUSTRY
Little output growth seen for 2024 / Plastics buyers to continue struggling / Competition with US and China a challenge
05.01.2024
SABIC / LINDE
Firms seek to decarbonise ethylene glycol process / Saudi government joins carbon capture and storage thinktank
02.01.2024
Seite 1 von 26
Topic search
Plastics Information Europe
  • Polymer Prices (5.665)
    • Petrochemicals (378)
    • Standard Thermoplastics (882)
    • PET (234)
    • Engineering Thermoplastics (240)
    • Recyclate (337)
      • Standard Thermoplastics / Recyclate (168)
      • Engineering Thermoplastics / Recyclate (169)
    • Polyurethanes (231)
    • High Performance Polymers (2)
    • Composites (168)
    • Announcements (2.538)
    • World Regions (541)
      • China (264)
        • Standard Thermoplastics (133)
        • Engineering Thermoplastics (131)
      • North America (153)
      • Russia (124)
    • Spot Prices (110)
    • Forecasts (4)
  • Companies (31.944)
    • Polymer Materials (15.816)
      • Petrochemicals (2.838)
      • Charge (1.752)
        • General (88)
        • Masterbatches (328)
        • Additives (725)
        • Colours (353)
        • Reinforcements/Fillers (258)
      • Polymers (10.126)
        • General (641)
        • Standard Thermoplastics (3.506)
          • General (112)
          • Polyolefins (1.764)
          • Polystyrenes (315)
          • PVC (618)
          • Polyester (515)
          • Expandable (PS, PP, PE) (182)
        • Technical Thermoplastics (3.019)
          • General (339)
          • Styrene Copolymers (241)
          • PC/PMMA (416)
          • Polyamides (830)
          • POM/PBT/PP (296)
          • Technical Compounds (897)
        • PUR (728)
        • Other (2.232)
          • General (95)
          • Composites/Thermosets (387)
          • High Performance (565)
          • Biopolymers (651)
          • Elastomers/TPE (342)
          • Recyclate (192)
      • Distribution (1.100)
    • Machinery (1.043)
      • General (26)
      • Plant Construction (127)
      • Core Machines (715)
        • General (85)
        • Extrusion (174)
        • Injection Moulding (353)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (171)
        • General (30)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.662)
      • General (827)
      • Extrusion (2.193)
        • General (110)
        • Flexible Films (1.053)
        • Rigid Films/Sheet (358)
        • Pipes (329)
        • Profiles/Rods (249)
        • Other (94)
      • Injection Moulding (1.591)
      • Blow Moulding (484)
      • PUR (272)
      • Other (1.066)
        • General (114)
        • Foam (297)
        • Composites/Thermosets (328)
        • Thermoforming (202)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (229)
    • Application (6.753)
      • General (123)
      • Packaging (2.898)
      • Construction (672)
      • Automotive / Transport (1.549)
      • Electrical Appliances (317)
      • Consumer Goods (631)
      • Medical (368)
      • Technical (195)
    • Other (1.670)
      • Recycling/Disposal (1.362)
      • Services (241)
      • Logistics (67)
  • Commercial Register (101)
    • Insolvency (96)
    • Changes (5)
  • Markets (21.264)
    • Polymer Materials (9.230)
      • Petrochemicals (2.241)
      • Charge (815)
        • General (38)
        • Masterbatches (89)
        • Additives (324)
        • Colours (146)
        • Reinforcements/Fillers (218)
      • Polymers (5.822)
        • General (649)
        • Standard Thermoplastics (2.245)
          • General (73)
          • Polyolefins (1.112)
          • Polystyrenes (147)
          • PVC (467)
          • Polyester (316)
          • Expandable (PS, PP, PE) (130)
        • Technical Thermoplastics (1.202)
          • General (86)
          • Styrene Copolymers (97)
          • PC/PMMA (138)
          • Polyamides (411)
          • POM/PBT/PP (104)
          • Technical Compounds (366)
        • PUR (427)
        • Other (1.299)
          • General (42)
          • Composites/Thermosets (285)
          • High Performance (288)
          • Biopolymers (405)
          • Elastomers/TPE (132)
          • Recyclate (147)
      • Other Materials (57)
      • Distribution (295)
    • Machinery (492)
      • General (127)
      • Plant Construction (14)
      • Core Machines (280)
        • General (105)
        • Extrusion (35)
        • Injection Moulding (119)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.614)
      • General (392)
      • Extrusion (590)
        • General (20)
        • Flexible Films (287)
        • Rigid Films/Sheets (114)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (75)
      • Other (296)
        • General (20)
        • Foam (75)
        • Composites/Thermosets (135)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.682)
      • General (33)
      • Packaging (1.757)
      • Construction (281)
      • Automotive / Transport (880)
      • Electrical Appliances (210)
      • Consumer Goods (231)
      • Medical (192)
      • Technical (54)
      • Other (44)
    • Regions and Countries (3.941)
      • World (193)
      • German-speaking Countries (459)
      • Europe (1.898)
        • General (451)
        • Italy (139)
        • France (153)
        • Spain/Portugal (94)
        • Great Britain/Ireland (494)
        • Low Countries (74)
        • Central Europe (171)
        • Scandinavia (43)
        • Russia (97)
        • Eastern Europe (44)
        • Southeastern Europe (138)
      • North America (471)
      • Asia (663)
        • General (117)
        • China (387)
        • Japan (49)
        • Korea (26)
        • India (84)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.305)
      • Recycling/Disposal (1.764)
      • Economic Trend (286)
      • Services (40)
      • Logistics (168)
      • Energy (47)
  • Production and Engineering (3.561)
    • Polymer Materials (2.235)
      • Petrochemicals (52)
      • Charge (424)
        • General (12)
        • Masterbatches (108)
        • Additives (216)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.730)
        • General (27)
        • Standard Themoplastics (348)
        • Technical Thermoplastics (584)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (198)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (705)
          • General (21)
          • Composites/Thermosets (105)
          • High Performance (158)
          • Biopolymers (226)
          • Elastomers/TPE (107)
          • Recyclate (88)
      • Other (29)
    • Machinery (93)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (32)
    • Research (400)
      • Polymer Materials (134)
      • Technical (12)
      • Product Development (39)
      • Process (78)
      • Application (85)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (48)
    • New Products (795)
      • Packaging (517)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (25)
      • Consumer Goods (46)
      • Medical (35)
      • Technical (7)
      • Other (35)
    • Other (38)
  • Management (569)
    • Purchasing (95)
    • General Management (116)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (6)
    • Finances (85)
    • Logistics (210)
  • People (1.444)
  • Industry (5.312)
    • General (1.076)
    • Associations/Institutions (2.060)
    • Legislation (1.097)
    • Environment / Health (1.069)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.103)
  • Plastic Fantastic (493)
  • Commentaries (75)
  • Interviews (116)
  • Notes by Publisher (67)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 13/04/2024
Ref: dj0ih2q1x3gdjt45tjvpvsqf
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_253935&node=100412