www.pieweb.com

Management Logistics

LOGISTICS
European Union launches naval mission for Red Sea protection / DB Schenker deal inches closer to completion
23.02.2024
LOGISTICS
Transport costs down from East to West during Spring Festival celebrations / Proposal for net-zero shipping
16.02.2024
LOGISTICS
Knock-on effects of Houthi attacks: twiddling thumbs at port of Hamburg / Researcher says no supply crisis in sight
09.02.2024
UK MANUFACTURING
Activity slumps in January / Supplier chain under pressure as Red Sea attacks on shipping continue
08.02.2024
SUN CHEMICAL
Pigment manufacturer announces freight surcharge due to Red Sea unrest
05.02.2024
LOGISTICS
Situation for world shipping remains blue / Rat race for Germany's DB Schenker begins / Freight rates largely unchanged
02.02.2024
LOGISTICS
40% or more: container freight rates skyrocket / Rail strike paralyses Germany
25.01.2024
SONGWON
Additive producer hikes stabiliser prices / Freight surcharge added
19.01.2024
LOGISTICS
Stand up (if you own ships) – freight rate rally continues / Hapag-Lloyd, Maersk agree to pool transport assets / Is mega-deal a boon for customers?
19.01.2024
LOGISTICS
German rail strike costs billions / Sea transport challenges continue / Container rates rise sharply
12.01.2024
LOGISTICS
Floods strike parts of NW Europe / Panama Canal faces drought / Freight rates climb sharply
05.01.2024
LOGISTICS
Red Sea attacks rattle world trade / Freight rates rise as container ships take detours
22.12.2023
LOGISTICS
More trucks on the road in Germany / MSC set to acquire partial stake in Hamburg's port / Launch of world's first hydrogen-powered tugboat
15.12.2023
LOGISTICS
Less than 14 mn containers shipped worldwide / Austria introduces CO2-dependent lorry toll
08.12.2023
LOGISTICS
Will DB Cargo subsidies be cancelled? / A.P. Moller-Maersk to exit Syria / Freight rates mostly down
01.12.2023
LOGISTICS
Polish, Slovakian lorry drivers block border crossings to Ukraine / German hauliers to increase prices by 15% from 1 December
24.11.2023
LOGISTICS
Global trade does not seem to get off the ground / CMA CGM reports 94% slump in Q3 net profit
17.11.2023
TRADE POLICY
Environmental group says EU-Mercosur free trade agreement opens door to more plastic waste / Deal allows EU to sell SUP products banned in the region
15.11.2023
LOGISTICS
Hamburg port workers start wildcat strike / Maersk job cuts to exceed 10,000 / Good news from the US
10.11.2023
GLOBAL TRADE
Shipments rise in October / European commerce supports overall gains – IfW Kiel
08.11.2023
LOGISTICS
Sour mood strikes German logistics industry – ifo / Fewer ships allowed through the Panama Canal / Freight rates mostly unchanged
03.11.2023
LOGISTICS
Truck transport to become more expensive in Germany from December / New toll based on carbon emissions
27.10.2023
LOGISTICS
Price hike set for Suez transits / MSC's financial results leaked / Freight rates mostly down
20.10.2023
LOGISTICS
Hamas attacks threatens plans for Indo-Arab-European logistics network / Shipping costs steady to lower
13.10.2023
LOGISTICS
Hapag-Lloyd puts Germany's largest containership into service / 11 more of these ocean giants already ordered / Prices largely unchanged
05.10.2023
Seite 1 von 9
Topic search
Plastics Information Europe
  • Polymer Prices (5.607)
    • Petrochemicals (363)
    • Standard Thermoplastics (872)
    • PET (232)
    • Engineering Thermoplastics (238)
    • Recyclate (335)
      • Standard Thermoplastics / Recyclate (167)
      • Engineering Thermoplastics / Recyclate (168)
    • Polyurethanes (230)
    • High Performance Polymers (2)
    • Composites (166)
    • Announcements (2.525)
    • World Regions (535)
      • China (260)
        • Standard Thermoplastics (131)
        • Engineering Thermoplastics (129)
      • North America (151)
      • Russia (124)
    • Spot Prices (109)
  • Companies (31.682)
    • Polymer Materials (15.678)
      • Petrochemicals (2.811)
      • Charge (1.737)
        • General (87)
        • Masterbatches (326)
        • Additives (722)
        • Colours (350)
        • Reinforcements/Fillers (252)
      • Polymers (10.035)
        • General (636)
        • Standard Thermoplastics (3.473)
          • General (112)
          • Polyolefins (1.743)
          • Polystyrenes (312)
          • PVC (615)
          • Polyester (509)
          • Expandable (PS, PP, PE) (182)
        • Technical Thermoplastics (2.998)
          • General (339)
          • Styrene Copolymers (240)
          • PC/PMMA (411)
          • Polyamides (822)
          • POM/PBT/PP (294)
          • Technical Compounds (892)
        • PUR (722)
        • Other (2.206)
          • General (94)
          • Composites/Thermosets (385)
          • High Performance (561)
          • Biopolymers (642)
          • Elastomers/TPE (338)
          • Recyclate (186)
      • Distribution (1.095)
    • Machinery (1.041)
      • General (26)
      • Plant Construction (127)
      • Core Machines (714)
        • General (84)
        • Extrusion (174)
        • Injection Moulding (353)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (170)
        • General (30)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (91)
        • Components (13)
      • Finishing (4)
    • Processing (6.624)
      • General (820)
      • Extrusion (2.185)
        • General (110)
        • Flexible Films (1.048)
        • Rigid Films/Sheet (357)
        • Pipes (327)
        • Profiles/Rods (249)
        • Other (94)
      • Injection Moulding (1.578)
      • Blow Moulding (481)
      • PUR (271)
      • Other (1.061)
        • General (113)
        • Foam (295)
        • Composites/Thermosets (327)
        • Thermoforming (202)
        • Rotational Moulding (30)
        • Additive Manufacturing (94)
      • Finishing (228)
    • Application (6.705)
      • General (123)
      • Packaging (2.876)
      • Construction (668)
      • Automotive / Transport (1.537)
      • Electrical Appliances (317)
      • Consumer Goods (625)
      • Medical (367)
      • Technical (192)
    • Other (1.634)
      • Recycling/Disposal (1.335)
      • Services (239)
      • Logistics (60)
  • Commercial Register (98)
    • Insolvency (93)
    • Changes (5)
  • Markets (21.064)
    • Polymer Materials (9.143)
      • Petrochemicals (2.213)
      • Charge (807)
        • General (38)
        • Masterbatches (88)
        • Additives (324)
        • Colours (145)
        • Reinforcements/Fillers (212)
      • Polymers (5.774)
        • General (638)
        • Standard Thermoplastics (2.232)
          • General (72)
          • Polyolefins (1.104)
          • Polystyrenes (145)
          • PVC (465)
          • Polyester (316)
          • Expandable (PS, PP, PE) (130)
        • Technical Thermoplastics (1.192)
          • General (86)
          • Styrene Copolymers (97)
          • PC/PMMA (137)
          • Polyamides (408)
          • POM/PBT/PP (103)
          • Technical Compounds (361)
        • PUR (424)
        • Other (1.288)
          • General (41)
          • Composites/Thermosets (283)
          • High Performance (288)
          • Biopolymers (401)
          • Elastomers/TPE (132)
          • Recyclate (143)
      • Other Materials (57)
      • Distribution (292)
    • Machinery (492)
      • General (127)
      • Plant Construction (14)
      • Core Machines (280)
        • General (105)
        • Extrusion (35)
        • Injection Moulding (119)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.608)
      • General (387)
      • Extrusion (589)
        • General (20)
        • Flexible Films (287)
        • Rigid Films/Sheets (113)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (75)
      • Other (296)
        • General (20)
        • Foam (75)
        • Composites/Thermosets (135)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.651)
      • General (33)
      • Packaging (1.736)
      • Construction (280)
      • Automotive / Transport (873)
      • Electrical Appliances (210)
      • Consumer Goods (229)
      • Medical (192)
      • Technical (54)
      • Other (44)
    • Regions and Countries (3.926)
      • World (193)
      • German-speaking Countries (455)
      • Europe (1.890)
        • General (447)
        • Italy (139)
        • France (153)
        • Spain/Portugal (94)
        • Great Britain/Ireland (494)
        • Low Countries (74)
        • Central Europe (171)
        • Scandinavia (43)
        • Russia (94)
        • Eastern Europe (44)
        • Southeastern Europe (137)
      • North America (471)
      • Asia (660)
        • General (117)
        • China (386)
        • Japan (49)
        • Korea (26)
        • India (82)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.244)
      • Recycling/Disposal (1.732)
      • Economic Trend (275)
      • Services (40)
      • Logistics (159)
      • Energy (38)
  • Production and Engineering (3.533)
    • Polymer Materials (2.221)
      • Petrochemicals (52)
      • Charge (422)
        • General (12)
        • Masterbatches (107)
        • Additives (216)
        • Colours (52)
        • Reinforcements/Fillers (35)
      • Polymers (1.718)
        • General (27)
        • Standard Themoplastics (346)
        • Technical Thermoplastics (582)
          • General (19)
          • Styrene Copolymers (60)
          • PC/PMMA (62)
          • Polyamides (197)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (697)
          • General (21)
          • Composites/Thermosets (104)
          • High Performance (158)
          • Biopolymers (226)
          • Elastomers/TPE (106)
          • Recyclate (82)
      • Other (29)
    • Machinery (93)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (32)
    • Research (397)
      • Polymer Materials (134)
      • Technical (12)
      • Product Development (39)
      • Process (78)
      • Application (84)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (46)
    • New Products (784)
      • Packaging (506)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (25)
      • Consumer Goods (46)
      • Medical (35)
      • Technical (7)
      • Other (35)
    • Other (38)
  • Management (552)
    • Purchasing (92)
    • General Management (114)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (6)
    • Finances (82)
    • Logistics (201)
  • People (1.438)
  • Industry (5.238)
    • General (1.065)
    • Associations/Institutions (2.031)
    • Legislation (1.078)
    • Environment / Health (1.054)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.101)
  • Plastic Fantastic (490)
  • Commentaries (74)
  • Interviews (116)
  • Notes by Publisher (66)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 25/02/2024
Ref: pg4tqz45idgvpa45ypbzzg55
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_253110&node=100554