www.pieweb.com

Markets Polymers General

MICROPLASTICS
Research reveals bright colours lead to faster plastics degradation / Findings highlight implications for material design
22.05.2024
RUSSIA
Technological imports reach historic heights, thanks partly to Germany, Italy / Fresh US sanctions hurt, but not cripple, trade with Asia, Turkey
15.05.2024
UN PLASTICS TREATY
“The work is far from over”: Polymer production remains contentious in fourth session / Some convergence on waste management, recycling / 170 nations strive toward a global agreement
09.05.2024
FLEXIBLE PACKAGING
Prices higher in Q1 on supply chain disruptions / Demand remains flat / Modest growth possible, says European industry association
07.05.2024
ARKEMA
Acquisition of Dow's film adhesives division
03.05.2024
CHEMICAL INDUSTRY BELGIUM
Trade group calls on authorities to tackle unraveling crisis / Key operational performance indicators sliding / Surge in investment may not indicate recovery
29.04.2024
GERMAN ECONOMY
Government raises economic growth forecast slightly / ifo business climate index for April improves
26.04.2024
LIFE CYCLE ANALYSIS
Study shows alternatives to plastics increase GHG emissions
22.04.2024
CHEMICAL INDUSTRY GERMANY
“The Green Deal needs a business model” / Chemical segment fears for its competitiveness against global competition
22.04.2024
PLASTICS INDUSTRY EUROPE
Recycling rates, circular content increase but incinerated volumes rise / Region's share of global production remains in decline – Plastics Europe
10.04.2024
PLASTICS AND ENVIRONMENT
Parliament's ENVI committee backs EU's Zero Pellet Loss proposal / NGOs not fully satisfied
02.04.2024
UK
BPF manifesto spells out federation's ‘shopping list' for whichever party wins next general election / Document calls for range of support initiatives
22.03.2024
CHEMICAL INDUSTRY GERMANY
Dramatic slump in sales, production in 2023 / Dim prospects also for year ahead
21.03.2024
PLASTICS INDUSTRY GERMANY
Production is going through a deep trough / Planned regulation will set course for the future – Plastics Europe
19.03.2024
POLYMERS FOR EUROPE ALLIANCE
Voting begins for Best Polymer Producers Awards / Decarbonisation as overarching category
13.03.2024
TURKEY
Plastic product consumption up in 2023 / Severe price drop for incoming, outgoing polymer shipments / Economic growth despite massive inflation
11.03.2024
EUROPEAN CHEMICAL INDUSTRY
Industry ends 2023 on “a weak note” / Production, exports, imports down compared with 2022 / Uptick in investor confidence
08.03.2024
COVESTRO
Plastics producer still in the red / Full-year revenues sink one-fifth as cost cuts partly arrest profit decline
01.03.2024
GERMAN CHEMICALS INDUSTRY
Business confidence stuck at low level – ifo / Thin backlog remains a problem
29.02.2024
EUROPEAN ECONOMY
Morale in German plastics industry deteriorates – ifo / Manufacturers voice further concerns / Brighter outlook for services in Germany, Europe
27.02.2024
EUROPEAN INDUSTRIAL DEAL
Antwerp industry summit proposes revised climate goals for EU / Brudermüller: “Urgent need to enhance Europe's competitiveness“ / Complement or counterweight to green agenda?
23.02.2024
FLEXIBLE PACKAGING
Polyethylene film prices trend higher / Biaxial-oriented materials move sideways / Demand remains muted
22.02.2024
COVESTRO
World's first bio-based aniline pilot plant starts operation / Process to be tested together with German academic partners
20.02.2024
COVESTRO
Takeover talks with Adnoc reportedly stalled
09.02.2024
ALBIS
Distributor launches sales company in Vietnam
09.02.2024
Seite 1 von 27
Topic search
Plastics Information Europe
  • Polymer Prices (5.699)
    • Petrochemicals (386)
    • Standard Thermoplastics (888)
    • PET (235)
    • Engineering Thermoplastics (241)
    • Recyclate (341)
      • Standard Thermoplastics / Recyclate (170)
      • Engineering Thermoplastics / Recyclate (171)
    • Polyurethanes (233)
    • High Performance Polymers (2)
    • Composites (169)
    • Announcements (2.542)
    • World Regions (544)
      • China (266)
        • Standard Thermoplastics (134)
        • Engineering Thermoplastics (132)
      • North America (154)
      • Russia (124)
    • Spot Prices (112)
    • Forecasts (6)
  • Companies (32.137)
    • Polymer Materials (15.910)
      • Petrochemicals (2.862)
      • Charge (1.759)
        • General (88)
        • Masterbatches (328)
        • Additives (730)
        • Colours (355)
        • Reinforcements/Fillers (258)
      • Polymers (10.186)
        • General (645)
        • Standard Thermoplastics (3.532)
          • General (112)
          • Polyolefins (1.781)
          • Polystyrenes (315)
          • PVC (621)
          • Polyester (521)
          • Expandable (PS, PP, PE) (182)
        • Technical Thermoplastics (3.033)
          • General (342)
          • Styrene Copolymers (241)
          • PC/PMMA (418)
          • Polyamides (834)
          • POM/PBT/PP (297)
          • Technical Compounds (901)
        • PUR (733)
        • Other (2.243)
          • General (95)
          • Composites/Thermosets (387)
          • High Performance (568)
          • Biopolymers (653)
          • Elastomers/TPE (343)
          • Recyclate (197)
      • Distribution (1.103)
    • Machinery (1.043)
      • General (26)
      • Plant Construction (127)
      • Core Machines (715)
        • General (85)
        • Extrusion (174)
        • Injection Moulding (353)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (171)
        • General (30)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.693)
      • General (833)
      • Extrusion (2.205)
        • General (110)
        • Flexible Films (1.063)
        • Rigid Films/Sheet (358)
        • Pipes (331)
        • Profiles/Rods (249)
        • Other (94)
      • Injection Moulding (1.596)
      • Blow Moulding (485)
      • PUR (276)
      • Other (1.068)
        • General (114)
        • Foam (298)
        • Composites/Thermosets (328)
        • Thermoforming (203)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (230)
    • Application (6.797)
      • General (124)
      • Packaging (2.927)
      • Construction (677)
      • Automotive / Transport (1.554)
      • Electrical Appliances (318)
      • Consumer Goods (632)
      • Medical (368)
      • Technical (197)
    • Other (1.694)
      • Recycling/Disposal (1.379)
      • Services (243)
      • Logistics (72)
  • Commercial Register (102)
    • Insolvency (97)
    • Changes (5)
  • Markets (21.412)
    • Polymer Materials (9.291)
      • Petrochemicals (2.261)
      • Charge (817)
        • General (38)
        • Masterbatches (89)
        • Additives (324)
        • Colours (148)
        • Reinforcements/Fillers (218)
      • Polymers (5.860)
        • General (658)
        • Standard Thermoplastics (2.260)
          • General (73)
          • Polyolefins (1.120)
          • Polystyrenes (148)
          • PVC (467)
          • Polyester (321)
          • Expandable (PS, PP, PE) (131)
        • Technical Thermoplastics (1.208)
          • General (86)
          • Styrene Copolymers (97)
          • PC/PMMA (139)
          • Polyamides (414)
          • POM/PBT/PP (104)
          • Technical Compounds (368)
        • PUR (429)
        • Other (1.305)
          • General (42)
          • Composites/Thermosets (285)
          • High Performance (291)
          • Biopolymers (406)
          • Elastomers/TPE (132)
          • Recyclate (149)
      • Other Materials (57)
      • Distribution (296)
    • Machinery (492)
      • General (127)
      • Plant Construction (14)
      • Core Machines (280)
        • General (105)
        • Extrusion (35)
        • Injection Moulding (119)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.616)
      • General (393)
      • Extrusion (591)
        • General (20)
        • Flexible Films (288)
        • Rigid Films/Sheets (114)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (75)
      • Other (296)
        • General (20)
        • Foam (75)
        • Composites/Thermosets (135)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.719)
      • General (33)
      • Packaging (1.779)
      • Construction (285)
      • Automotive / Transport (887)
      • Electrical Appliances (211)
      • Consumer Goods (233)
      • Medical (192)
      • Technical (55)
      • Other (44)
    • Regions and Countries (3.953)
      • World (193)
      • German-speaking Countries (461)
      • Europe (1.904)
        • General (453)
        • Italy (139)
        • France (153)
        • Spain/Portugal (95)
        • Great Britain/Ireland (495)
        • Low Countries (74)
        • Central Europe (171)
        • Scandinavia (43)
        • Russia (99)
        • Eastern Europe (44)
        • Southeastern Europe (138)
      • North America (472)
      • Asia (666)
        • General (118)
        • China (388)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.341)
      • Recycling/Disposal (1.782)
      • Economic Trend (296)
      • Services (40)
      • Logistics (173)
      • Energy (50)
  • Production and Engineering (3.575)
    • Polymer Materials (2.240)
      • Petrochemicals (52)
      • Charge (426)
        • General (12)
        • Masterbatches (108)
        • Additives (218)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.732)
        • General (27)
        • Standard Themoplastics (349)
        • Technical Thermoplastics (584)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (198)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (706)
          • General (21)
          • Composites/Thermosets (105)
          • High Performance (158)
          • Biopolymers (226)
          • Elastomers/TPE (107)
          • Recyclate (89)
      • Other (30)
    • Machinery (93)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (32)
    • Research (402)
      • Polymer Materials (135)
      • Technical (12)
      • Product Development (39)
      • Process (78)
      • Application (86)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (48)
    • New Products (802)
      • Packaging (524)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (25)
      • Consumer Goods (46)
      • Medical (35)
      • Technical (7)
      • Other (35)
    • Other (38)
  • Management (578)
    • Purchasing (96)
    • General Management (118)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (85)
    • Logistics (215)
  • People (1.448)
  • Industry (5.396)
    • General (1.090)
    • Associations/Institutions (2.092)
    • Legislation (1.113)
    • Environment / Health (1.091)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.107)
  • Plastic Fantastic (495)
  • Commentaries (75)
  • Interviews (120)
  • Notes by Publisher (68)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 22/05/2024
Ref: ctasuljxjmj1elv3acfnftja
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_251861&node=100412