Production and Engineering Polymers Standard Themoplastics

GEON PERFORMANCE POLYMERS Former PolyOne PVC unit up for resale?	03.08.2022
INEOS Millions to be spent on production technology for recyclable, mono-material films	27.07.2022
RECYCLING EUROPE Circular Plastics Alliance extends coverage of MORE platform to rPVC	20.07.2022
RECYCLING USA US Plastics Pact oversight group creates PET reclaim scheme / Initial funding target set at USD 25 mn	08.07.2022
INEOS STYROLUTION Agreement to access styrene monomer made from post-consumer waste / Indaver‘s depolymerisation plant said to be first in Europe / Launch of bio-based ASA, SBC products	22.06.2022
SABIC UK label manufacturer uses PP made from ocean-bound plastics	13.06.2022
INEOS STYROLUTION Greek processor selects recycled PS for food packaging / New grade launched in Asia	30.05.2022
PLASTICS AND ENVIRONMENT Study for European Commission explores scenarios for PVC phase-out	02.05.2022
ELIX POLYMERS Partnership with suppliers of sustainable ABS precursors	25.04.2022
SABIC Mattel to incorporate Trucircle renewable polymers in products globally	12.04.2022
RECYCLING Study says rPET can contaminate drinks more than virgin resin / Researchers call for “super cleaning”	31.03.2022
VYNOVA Two new hydrogen-fired steam boilers expected to cut carbon footprint	22.03.2022
BASF Neopor EPS grade contains 10% recyclate / Mass balance approach	15.03.2022
INOVYN Plans to boost PVC speciality output / Increased Belgian production set for mid-2022 following delay	08.03.2022
PREGIS Protective film made from 100% recycled content	24.02.2022
VÖSLAUER Austrian bottler expands reusable PET range / Savings of 400 t PET / Climate-neutral production	27.01.2022
FACE MASKS Sabic PP now used in local N95 mask production	24.01.2022
FOOD PACKAGING Milliken clarifier used to make clear PP for microwavable products / Development with Taiwanese thermoformer	20.01.2022
TRINSEO Acquisition of recycler Heathland / New products based on renewables	21.12.2021
SABIC Circular resins from mixed and marine waste said to be world first / Products made of these materials due soon	07.12.2021
POLYPLASTICS Two “Renatus” glass-fibre reinforced PET grades introduced / Automotive applications	29.11.2021
WESTLAKE Vinnolit launches lower-carbon “GreenVin” PVC / Second such product in 2021	23.11.2021
BRASKEM Improved environmental impact of “Zeeflex” expanded PE foam mattresses	16.11.2021
LYONDELLBASELL PP, PE with measurable C14 renewable content / Feedstock from Neste made of bio-based waste	03.11.2021
JSP Price hike for “Arpo” expanded PP in EMEA	25.10.2021

Seite 1 von 13

Topic search

Plastics Information Europe

Polymer Prices (4.456)
- Petrochemicals (219)
- Standard Thermoplastics (644)
- PET (188)
- Engineering Thermoplastics (192)
- Recyclate (247)
  - Standard Thermoplastics / Recyclate (123)
  - Engineering Thermoplastics / Recyclate (124)
- Polyurethanes (186)
- High Performance Polymers (2)
- Composites (122)
- Announcements (2.212)
- World Regions (381)
  - China (172)
    - Standard Thermoplastics (87)
    - Engineering Thermoplastics (85)
  - North America (107)
  - Russia (102)
- Spot Prices (63)
Companies (24.084)
- Polymer Materials (11.832)
  - Petrochemicals (2.084)
  - Charge (1.437)
    - General (65)
    - Masterbatches (278)
    - Additives (584)
    - Colours (283)
    - Reinforcements/Fillers (227)
  - Polymers (7.421)
    - General (410)
    - Standard Thermoplastics (2.657)
      - General (89)
      - Polyolefins (1.305)
      - Polystyrenes (221)
      - PVC (497)
      - Polyester (397)
      - Expandable (PS, PP, PE) (148)
    - Technical Thermoplastics (2.205)
      - General (294)
      - Styrene Copolymers (168)
      - PC/PMMA (286)
      - Polyamides (575)
      - POM/PBT/PP (198)
      - Technical Compounds (684)
    - PUR (537)
    - Other (1.612)
      - General (78)
      - Composites/Thermosets (327)
      - High Performance (416)
      - Biopolymers (486)
      - Elastomers/TPE (254)
      - Recyclate (51)
  - Distribution (890)
- Machinery (951)
  - General (20)
  - Plant Construction (106)
  - Core Machines (661)
    - General (75)
    - Extrusion (159)
    - Injection Moulding (332)
    - Blow Moulding (65)
    - Foam (10)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (160)
    - General (28)
    - Control Systems (4)
    - Automatisation (29)
    - Dies/Tools/Moulds (86)
    - Components (13)
  - Finishing (4)
- Processing (5.445)
  - General (679)
  - Extrusion (1.784)
    - General (83)
    - Flexible Films (836)
    - Rigid Films/Sheet (300)
    - Pipes (279)
    - Profiles/Rods (213)
    - Other (73)
  - Injection Moulding (1.307)
  - Blow Moulding (388)
  - PUR (213)
  - Other (881)
    - General (96)
    - Foam (235)
    - Composites/Thermosets (295)
    - Thermoforming (163)
    - Rotational Moulding (26)
    - Additive Manufacturing (66)
  - Finishing (193)
- Application (5.106)
  - General (90)
  - Packaging (2.105)
  - Construction (527)
  - Automotive / Transport (1.259)
  - Electrical Appliances (261)
  - Consumer Goods (421)
  - Medical (298)
  - Technical (145)
- Other (750)
  - Recycling/Disposal (590)
  - Services (160)
Commercial Register (72)
- Insolvency (67)
- Changes (5)
Markets (15.341)
- Polymer Materials (6.608)
  - Petrochemicals (1.556)
  - Charge (667)
    - General (32)
    - Masterbatches (78)
    - Additives (252)
    - Colours (113)
    - Reinforcements/Fillers (192)
  - Polymers (4.181)
    - General (331)
    - Standard Thermoplastics (1.758)
      - General (47)
      - Polyolefins (864)
      - Polystyrenes (109)
      - PVC (370)
      - Polyester (255)
      - Expandable (PS, PP, PE) (113)
    - Technical Thermoplastics (855)
      - General (75)
      - Styrene Copolymers (58)
      - PC/PMMA (109)
      - Polyamides (290)
      - POM/PBT/PP (67)
      - Technical Compounds (256)
    - PUR (318)
    - Other (919)
      - General (31)
      - Composites/Thermosets (235)
      - High Performance (228)
      - Biopolymers (298)
      - Elastomers/TPE (100)
      - Recyclate (27)
  - Other Materials (12)
  - Distribution (192)
- Machinery (439)
  - General (110)
  - Plant Construction (12)
  - Core Machines (249)
    - General (88)
    - Extrusion (32)
    - Injection Moulding (108)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (68)
    - General (21)
    - Automatisation (14)
    - Dies/Tools/Moulds (33)
- Processing (1.362)
  - General (294)
  - Extrusion (501)
    - General (18)
    - Flexible Films (235)
    - Rigid Films/Sheets (98)
    - Pipes (66)
    - Profiles/Rods (77)
    - Other (7)
  - Injection Moulding (172)
  - Blow Moulding (39)
  - PUR (60)
  - Other (254)
    - General (19)
    - Foam (56)
    - Composites/Thermosets (129)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (22)
  - Finishing (42)
- Applications (2.546)
  - General (21)
  - Packaging (1.079)
  - Construction (224)
  - Automotive / Transport (702)
  - Electrical Appliances (172)
  - Consumer Goods (136)
  - Medical (143)
  - Technical (41)
  - Other (28)
- Regions and Countries (3.513)
  - World (170)
  - German-speaking Countries (392)
  - Europe (1.707)
    - General (383)
    - Italy (129)
    - France (151)
    - Spain/Portugal (77)
    - Great Britain/Ireland (456)
    - Low Countries (73)
    - Central Europe (167)
    - Scandinavia (41)
    - Russia (83)
    - Eastern Europe (38)
    - Southeastern Europe (109)
  - North America (403)
  - Asia (596)
    - General (104)
    - China (345)
    - Japan (47)
    - Korea (24)
    - India (76)
  - Middle East (135)
  - Other (34)
  - South America (76)
- Other (873)
  - Recycling/Disposal (778)
  - Economic Trend (60)
  - Services (29)
  - Logistics (6)
Production and Engineering (2.576)
- Polymer Materials (1.667)
  - Petrochemicals (27)
  - Charge (338)
    - General (12)
    - Masterbatches (77)
    - Additives (175)
    - Colours (39)
    - Reinforcements/Fillers (35)
  - Polymers (1.277)
    - General (15)
    - Standard Themoplastics (247)
    - Technical Thermoplastics (478)
      - General (17)
      - Styrene Copolymers (45)
      - PC/PMMA (48)
      - Polyamides (162)
      - POM/PBT/PP (52)
      - Technical Compounds (154)
    - PUR (54)
    - Other (483)
      - General (17)
      - Composites/Thermosets (93)
      - High Performance (123)
      - Biopolymers (157)
      - Elastomers/TPE (89)
      - Recyclate (4)
  - Other (25)
- Machinery (86)
  - Extrusion (19)
    - General (8)
    - Flexible Films (4)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (26)
- Research (251)
  - Polymer Materials (89)
  - Technical (10)
  - Product Development (27)
  - Process (57)
  - Application (49)
  - Patents (2)
    - Polymer Materials (1)
    - Process (1)
  - Other (17)
- New Products (547)
  - Packaging (340)
  - Construction (26)
  - Automotive / Transport (71)
  - Electrical Appliances (21)
  - Consumer Goods (31)
  - Medical (27)
  - Technical (7)
  - Other (24)
- Other (25)
Management (166)
- Purchasing (25)
- General Management (50)
- Company organisation (37)
- Marketing/Sales (8)
- Human Resources (3)
- Finances (36)
- Logistics (7)
People (1.257)
Industry (2.974)
- General (677)
- Associations/Institutions (1.264)
- Legislation (653)
- Environment / Health (370)
- plas.TV - Plastics unite(d) (10)
Events (981)
Plastic Fantastic (356)
Commentaries (52)
Interviews (61)
Notes by Publisher (28)