www.pieweb.com

Industry Environment / Health

PFAS
US accelerates campaign against “forever chemicals” / Will avalanche of class action lawsuits hit manufacturers?
10.06.2024
PLASTIC PACKAGING GERMANY
Has requirement to offer reusable packaging for takeaway failed? / Minimal usage rate in 2023 / More municipalities look into packaging tax / New regulation by PPWR?
03.06.2024
TPC
US authorities fine petchems maker USD 30 mn for 2019 blasts / Remedial and safety measures worth USD 80 mn mandated
29.05.2024
MEXICO
Waiting for the rain: Water shortage affects more and more plastics plants / Three forces majeures so far / European PVC prices could firm
28.05.2024
PLASTICS WASTE
Report lists top 10 plastics waste exporters / Germany heads the leader board, followed by Japan and the UK
27.05.2024
PLASTICS AND HEALTH
EPA reveals results of two phthalate assessments / DIDP with mostly clean bill of health; DINP eyed more critically
24.05.2024
PLASTICS AND CLIMATE
Study pinpoints GHG emissions at each step of plastics production value chain
23.05.2024
MICROPLASTICS
Research reveals bright colours lead to faster plastics degradation / Findings highlight implications for material design
22.05.2024
PACKAGING UK
Study urges FMCG companies to speed up transition towards sustainable packaging products
16.05.2024
SUSTAINABILITY
Four EU member states call for sustainable carbon policy package / Proposals aim to strengthen uptake of green feedstocks and boost European competitiveness internationally
15.05.2024
EPS
British Plastics Federation counters newspaper's claims about expanded polystyrene
15.05.2024
TEPPFA
Plastic pipes group urges EU policymakers to consider building sector's needs for Green Deal
14.05.2024
MARINE LITTER
Need for better management of plastics waste – CleanHub report / “Shocking” levels of ocean plastics
14.05.2024
COLGATE-PALMOLIVE
Consumer-goods giant says it might not meet key packaging circularity target by 2025
14.05.2024
UNILEVER
Giant admits to failure of sustainability target / Management should “hang their heads in shame” – Greenpeace
13.05.2024
PLASTICS AND ENVIRONMENT
Industry initiative Operation Clean Sweep expands presence to 65 countries / 2023 Global Impact report
10.05.2024
UN PLASTICS TREATY
“The work is far from over”: Polymer production remains contentious in fourth session / Some convergence on waste management, recycling / 170 nations strive toward a global agreement
09.05.2024
PACKAGING EUROPE
“EU member states can exempt their economies for five years” / Lawyer Christian Alexander Mayer talks to PIE about special national routes for the PPWR
09.05.2024
PPWR
“Nobody knows how goods are supposed to be transported in Europe in the future” – IK criticises EU packaging regulation
09.05.2024
PLASTICS AND ENVIRONMENT
56 companies responsible for half of branded plastics pollution – survey / Researchers call for reduced plastics production in FMCG
08.05.2024
FRANCE
Activists say European deposit refund schemes no silver bullet / Surge in consumption expected as one consequence of return systems / Elipso dismisses claims as biased
30.04.2024
PFAS
UN declares DuPont and Chemours violated human rights for contaminating water / EPA sets new drinking water standards
26.04.2024
EU PACKAGING
Parliament adopts updated PPWR / Rules “require practical implementation” – Plastics Europe MD
26.04.2024
PLASTICS WASTE
“Producing less material is the solution, not recycling” / UK households throw away 1.7 bn pieces of plastics every week – Greenpeace report
25.04.2024
TRINSEO
Flame-retardant grades made without PFAS, halogenated additives
23.04.2024
Seite 1 von 44
Topic search
Plastics Information Europe
  • Polymer Prices (5.719)
    • Petrochemicals (394)
    • Standard Thermoplastics (892)
    • PET (236)
    • Engineering Thermoplastics (242)
    • Recyclate (341)
      • Standard Thermoplastics / Recyclate (170)
      • Engineering Thermoplastics / Recyclate (171)
    • Polyurethanes (233)
    • High Performance Polymers (2)
    • Composites (170)
    • Announcements (2.544)
    • World Regions (545)
      • China (266)
        • Standard Thermoplastics (134)
        • Engineering Thermoplastics (132)
      • North America (155)
      • Russia (124)
    • Spot Prices (112)
    • Forecasts (8)
  • Companies (32.239)
    • Polymer Materials (15.968)
      • Petrochemicals (2.873)
      • Charge (1.764)
        • General (88)
        • Masterbatches (330)
        • Additives (731)
        • Colours (357)
        • Reinforcements/Fillers (258)
      • Polymers (10.224)
        • General (646)
        • Standard Thermoplastics (3.545)
          • General (112)
          • Polyolefins (1.791)
          • Polystyrenes (315)
          • PVC (623)
          • Polyester (521)
          • Expandable (PS, PP, PE) (183)
        • Technical Thermoplastics (3.043)
          • General (343)
          • Styrene Copolymers (242)
          • PC/PMMA (419)
          • Polyamides (837)
          • POM/PBT/PP (299)
          • Technical Compounds (903)
        • PUR (737)
        • Other (2.253)
          • General (95)
          • Composites/Thermosets (387)
          • High Performance (569)
          • Biopolymers (656)
          • Elastomers/TPE (343)
          • Recyclate (203)
      • Distribution (1.107)
    • Machinery (1.044)
      • General (26)
      • Plant Construction (127)
      • Core Machines (716)
        • General (85)
        • Extrusion (174)
        • Injection Moulding (354)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (171)
        • General (30)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.705)
      • General (838)
      • Extrusion (2.205)
        • General (110)
        • Flexible Films (1.063)
        • Rigid Films/Sheet (358)
        • Pipes (331)
        • Profiles/Rods (249)
        • Other (94)
      • Injection Moulding (1.602)
      • Blow Moulding (485)
      • PUR (276)
      • Other (1.069)
        • General (114)
        • Foam (298)
        • Composites/Thermosets (329)
        • Thermoforming (203)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (230)
    • Application (6.820)
      • General (124)
      • Packaging (2.938)
      • Construction (678)
      • Automotive / Transport (1.559)
      • Electrical Appliances (319)
      • Consumer Goods (635)
      • Medical (369)
      • Technical (198)
    • Other (1.702)
      • Recycling/Disposal (1.384)
      • Services (243)
      • Logistics (75)
  • Commercial Register (103)
    • Insolvency (98)
    • Changes (5)
  • Markets (21.500)
    • Polymer Materials (9.342)
      • Petrochemicals (2.271)
      • Charge (820)
        • General (38)
        • Masterbatches (89)
        • Additives (326)
        • Colours (149)
        • Reinforcements/Fillers (218)
      • Polymers (5.895)
        • General (664)
        • Standard Thermoplastics (2.272)
          • General (73)
          • Polyolefins (1.127)
          • Polystyrenes (150)
          • PVC (469)
          • Polyester (322)
          • Expandable (PS, PP, PE) (131)
        • Technical Thermoplastics (1.213)
          • General (86)
          • Styrene Copolymers (98)
          • PC/PMMA (140)
          • Polyamides (414)
          • POM/PBT/PP (106)
          • Technical Compounds (369)
        • PUR (433)
        • Other (1.313)
          • General (42)
          • Composites/Thermosets (285)
          • High Performance (292)
          • Biopolymers (406)
          • Elastomers/TPE (132)
          • Recyclate (156)
      • Other Materials (57)
      • Distribution (299)
    • Machinery (493)
      • General (127)
      • Plant Construction (14)
      • Core Machines (281)
        • General (105)
        • Extrusion (35)
        • Injection Moulding (120)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.617)
      • General (394)
      • Extrusion (591)
        • General (20)
        • Flexible Films (288)
        • Rigid Films/Sheets (114)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (75)
      • Other (296)
        • General (20)
        • Foam (75)
        • Composites/Thermosets (135)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.734)
      • General (34)
      • Packaging (1.785)
      • Construction (286)
      • Automotive / Transport (893)
      • Electrical Appliances (211)
      • Consumer Goods (233)
      • Medical (193)
      • Technical (55)
      • Other (44)
    • Regions and Countries (3.957)
      • World (194)
      • German-speaking Countries (463)
      • Europe (1.905)
        • General (453)
        • Italy (139)
        • France (153)
        • Spain/Portugal (95)
        • Great Britain/Ireland (495)
        • Low Countries (74)
        • Central Europe (171)
        • Scandinavia (43)
        • Russia (99)
        • Eastern Europe (45)
        • Southeastern Europe (138)
      • North America (472)
      • Asia (666)
        • General (118)
        • China (388)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.357)
      • Recycling/Disposal (1.790)
      • Economic Trend (301)
      • Services (40)
      • Logistics (176)
      • Energy (50)
  • Production and Engineering (3.588)
    • Polymer Materials (2.248)
      • Petrochemicals (53)
      • Charge (429)
        • General (12)
        • Masterbatches (110)
        • Additives (219)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.736)
        • General (28)
        • Standard Themoplastics (349)
        • Technical Thermoplastics (584)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (198)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (709)
          • General (21)
          • Composites/Thermosets (105)
          • High Performance (158)
          • Biopolymers (227)
          • Elastomers/TPE (107)
          • Recyclate (91)
      • Other (30)
    • Machinery (93)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (32)
    • Research (403)
      • Polymer Materials (135)
      • Technical (12)
      • Product Development (39)
      • Process (78)
      • Application (86)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (49)
    • New Products (806)
      • Packaging (526)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (25)
      • Consumer Goods (46)
      • Medical (36)
      • Technical (7)
      • Other (36)
    • Other (38)
  • Management (583)
    • Purchasing (96)
    • General Management (120)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (85)
    • Logistics (218)
  • People (1.450)
  • Industry (5.436)
    • General (1.098)
    • Associations/Institutions (2.107)
    • Legislation (1.123)
    • Environment / Health (1.098)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.110)
  • Plastic Fantastic (497)
  • Commentaries (75)
  • Interviews (121)
  • Notes by Publisher (68)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 12/06/2024
Ref: oelz1t55rsb1d4qdbnficb55
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_243402&node=100545