www.pieweb.com

Markets Polymer Materials Petrochemicals

CHEMICAL INDUSTRY GERMANY
Producers still gloomy as downturn continues / Resin production falls sharply / VCI repeats calls for help from Berlin
19.09.2023
INDIA
Plans with Saudi Arabia for Ratnagiri refinery to be accelerated / Resistance from locals
18.09.2023
ENERGY TRANSITION
Geopolitical risks remain for critical materials supply chains – report / Diversification is key
13.09.2023
PFAS
More 'forever chemicals' in plant-based straws than plastic ones – study
13.09.2023
PETROCHEMICAL MARKETS
China: Malfunction of BASF cracker in Nanjing / Shutdown impacts downstream production
12.09.2023
PETROCHEMICAL MARKETS
Envalior declares force majeure for caprolactam / Ample PA 6 reportedly available
11.09.2023
HYDROGEN
US seeks to unseat Europe as frontrunner in the race to ‘net zero' / Energy Department publishes hydrogen strategy paper / Generous subsidies under Inflation Reduction Act
11.09.2023
PETROCHEMICAL MARKETS
BASF TotalEnergies JV: Fire paralyses cracker in Port Arthur, Texas / No serious consequences for polymer lines reported
08.09.2023
GERMAN ECONOMY
President of German chemical industry writes 'fiery letter' to Chancellor / 'Economic imbalance must become a priority'
31.08.2023
BRASKEM
Plans confirmed to build JV bio-based ethylene plant in Thailand with SCGC
29.08.2023
RESEARCH
Catalytic process to convert ethylene – University of Virginia / Potential to reduce negative impact of plastics production
28.08.2023
GERMAN ECONOMY
DIW: Industry shuffles on / Weak growth expected for 2023
25.08.2023
EXXONMOBIL
Workers cite safety concerns in UK ethylene plant walkout / Normal production continues – management
21.08.2023
PETROCHEMICAL MARKETS
BASF/Shell: Ellba plant for styrene reportedly shut down / Market supply tightens
18.08.2023
ENERGY COSTS
HWWI price index rises in July / Crude oil, natural gas become more expensive
18.08.2023
COMMENT
Greed isn't cool: Why the plastics industry should be careful not to stifle the budding economy
17.08.2023
FOREIGN TRADE
German chemical exports decline significantly / Fewer imports
17.08.2023
SHELL
Texas sues oil firm, Pemex for over USD 1 mn – media reports / State seeks damages following May fire at Deer Park site / Olefins unit to be running by Q4 – Shell spokesperson
16.08.2023
EPS
Styrene undersupply: are higher prices imminent? / Rising demand could herald trend reversal
11.08.2023
EUROPEAN ECONOMY
German companies report historically low order backlog / Weak global demand / 'No recovery in sight'
11.08.2023
PLASTICS AND ENVIRONMENT
Companies including Saudi Aramco, Exxon Mobil fail to recognise risks in published documents – Planet Tracker report
10.08.2023
HYDROGEN
EU Commission's hydrogen drive gains momentum / Germany updates strategy / Ireland could become net exporter / Poland mulls hydrogen “valleys”
09.08.2023
GLOBAL TRADE
Slowdown hits international commerce / Growth concerns on the rise – IfW Kiel
08.08.2023
GLOBAL TRADE
Confidence among exporters in 2023 global trade turnover falls / Companies have smaller appetite for new markets - Allianz Trade report
02.08.2023
PLASTIC PACKAGING
German poll blames weak demand for production cutbacks / Lower earnings expected
02.08.2023
Seite 1 von 86
Topic search
Plastics Information Europe
  • Polymer Prices (5.473)
    • Petrochemicals (332)
    • Standard Thermoplastics (845)
    • PET (227)
    • Engineering Thermoplastics (231)
    • Recyclate (325)
      • Standard Thermoplastics / Recyclate (162)
      • Engineering Thermoplastics / Recyclate (163)
    • Polyurethanes (225)
    • High Performance Polymers (2)
    • Composites (161)
    • Announcements (2.501)
    • World Regions (520)
      • China (250)
        • Standard Thermoplastics (126)
        • Engineering Thermoplastics (124)
      • North America (146)
      • Russia (124)
    • Spot Prices (104)
  • Companies (30.929)
    • Polymer Materials (15.317)
      • Petrochemicals (2.744)
      • Charge (1.707)
        • General (85)
        • Masterbatches (322)
        • Additives (712)
        • Colours (338)
        • Reinforcements/Fillers (250)
      • Polymers (9.790)
        • General (618)
        • Standard Thermoplastics (3.397)
          • General (111)
          • Polyolefins (1.695)
          • Polystyrenes (306)
          • PVC (603)
          • Polyester (503)
          • Expandable (PS, PP, PE) (179)
        • Technical Thermoplastics (2.933)
          • General (337)
          • Styrene Copolymers (235)
          • PC/PMMA (399)
          • Polyamides (800)
          • POM/PBT/PP (288)
          • Technical Compounds (874)
        • PUR (705)
        • Other (2.137)
          • General (92)
          • Composites/Thermosets (380)
          • High Performance (544)
          • Biopolymers (625)
          • Elastomers/TPE (326)
          • Recyclate (170)
      • Distribution (1.076)
    • Machinery (1.031)
      • General (25)
      • Plant Construction (126)
      • Core Machines (707)
        • General (83)
        • Extrusion (174)
        • Injection Moulding (348)
        • Blow Moulding (70)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (169)
        • General (30)
        • Control Systems (4)
        • Automatisation (31)
        • Dies/Tools/Moulds (91)
        • Components (13)
      • Finishing (4)
    • Processing (6.503)
      • General (799)
      • Extrusion (2.153)
        • General (107)
        • Flexible Films (1.029)
        • Rigid Films/Sheet (354)
        • Pipes (323)
        • Profiles/Rods (247)
        • Other (93)
      • Injection Moulding (1.550)
      • Blow Moulding (472)
      • PUR (261)
      • Other (1.044)
        • General (109)
        • Foam (291)
        • Composites/Thermosets (323)
        • Thermoforming (198)
        • Rotational Moulding (30)
        • Additive Manufacturing (93)
      • Finishing (224)
    • Application (6.543)
      • General (121)
      • Packaging (2.797)
      • Construction (656)
      • Automotive / Transport (1.506)
      • Electrical Appliances (313)
      • Consumer Goods (604)
      • Medical (361)
      • Technical (185)
    • Other (1.535)
      • Recycling/Disposal (1.267)
      • Services (231)
      • Logistics (37)
  • Commercial Register (93)
    • Insolvency (88)
    • Changes (5)
  • Markets (20.422)
    • Polymer Materials (8.885)
      • Petrochemicals (2.139)
      • Charge (795)
        • General (38)
        • Masterbatches (86)
        • Additives (321)
        • Colours (140)
        • Reinforcements/Fillers (210)
      • Polymers (5.611)
        • General (595)
        • Standard Thermoplastics (2.187)
          • General (70)
          • Polyolefins (1.076)
          • Polystyrenes (144)
          • PVC (457)
          • Polyester (311)
          • Expandable (PS, PP, PE) (129)
        • Technical Thermoplastics (1.164)
          • General (85)
          • Styrene Copolymers (94)
          • PC/PMMA (134)
          • Polyamides (398)
          • POM/PBT/PP (101)
          • Technical Compounds (352)
        • PUR (416)
        • Other (1.249)
          • General (40)
          • Composites/Thermosets (282)
          • High Performance (282)
          • Biopolymers (389)
          • Elastomers/TPE (129)
          • Recyclate (127)
      • Other Materials (54)
      • Distribution (286)
    • Machinery (487)
      • General (126)
      • Plant Construction (14)
      • Core Machines (277)
        • General (105)
        • Extrusion (35)
        • Injection Moulding (116)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (70)
        • General (21)
        • Automatisation (15)
        • Dies/Tools/Moulds (34)
    • Processing (1.590)
      • General (378)
      • Extrusion (586)
        • General (20)
        • Flexible Films (285)
        • Rigid Films/Sheets (113)
        • Pipes (70)
        • Profiles/Rods (88)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (73)
      • Other (292)
        • General (19)
        • Foam (75)
        • Composites/Thermosets (134)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (36)
      • Finishing (44)
    • Applications (3.529)
      • General (32)
      • Packaging (1.658)
      • Construction (275)
      • Automotive / Transport (856)
      • Electrical Appliances (209)
      • Consumer Goods (219)
      • Medical (188)
      • Technical (53)
      • Other (39)
    • Regions and Countries (3.882)
      • World (191)
      • German-speaking Countries (449)
      • Europe (1.865)
        • General (432)
        • Italy (138)
        • France (153)
        • Spain/Portugal (91)
        • Great Britain/Ireland (488)
        • Low Countries (74)
        • Central Europe (171)
        • Scandinavia (43)
        • Russia (94)
        • Eastern Europe (44)
        • Southeastern Europe (137)
      • North America (466)
      • Asia (654)
        • General (114)
        • China (383)
        • Japan (49)
        • Korea (26)
        • India (82)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.049)
      • Recycling/Disposal (1.636)
      • Economic Trend (236)
      • Services (40)
      • Logistics (137)
  • Production and Engineering (3.463)
    • Polymer Materials (2.182)
      • Petrochemicals (49)
      • Charge (421)
        • General (12)
        • Masterbatches (106)
        • Additives (216)
        • Colours (52)
        • Reinforcements/Fillers (35)
      • Polymers (1.683)
        • General (26)
        • Standard Themoplastics (335)
        • Technical Thermoplastics (577)
          • General (19)
          • Styrene Copolymers (59)
          • PC/PMMA (61)
          • Polyamides (196)
          • POM/PBT/PP (65)
          • Technical Compounds (177)
        • PUR (66)
        • Other (679)
          • General (19)
          • Composites/Thermosets (104)
          • High Performance (157)
          • Biopolymers (219)
          • Elastomers/TPE (104)
          • Recyclate (76)
      • Other (29)
    • Machinery (93)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (32)
    • Research (379)
      • Polymer Materials (127)
      • Technical (12)
      • Product Development (38)
      • Process (73)
      • Application (82)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (43)
    • New Products (773)
      • Packaging (496)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (24)
      • Consumer Goods (46)
      • Medical (35)
      • Technical (7)
      • Other (35)
    • Other (36)
  • Management (498)
    • Purchasing (85)
    • General Management (102)
    • Company organisation (43)
    • Marketing/Sales (12)
    • Human Resources (6)
    • Finances (75)
    • Logistics (175)
  • People (1.416)
  • Industry (4.958)
    • General (1.040)
    • Associations/Institutions (1.933)
    • Legislation (1.000)
    • Environment / Health (975)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.093)
  • Plastic Fantastic (479)
  • Commentaries (69)
  • Interviews (113)
  • Notes by Publisher (60)
© 2023 by Plastics Information Europe, Bad Homburg
Date of print: 25/09/2023
Ref: fhhdqovlxyynqs55pyghua45
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_233706&node=100194