www.pieweb.com

Markets Other Recycling/Disposal

AUTOMOTIVE PLASTICS
Recycling targets for ELVs should get green light / Certification of recycled content necessary for level playing field – EuRIC
14.10.2024
INDAVER
Belgian waste management group unveils new depolymerisation plant / 26,000 t/y of polystyrene, polyolefin waste
14.10.2024
IRELAND
Ongoing circular economy challenges / Investment, collaboration essential – report
11.10.2024
SUSTAINABLE PACKAGING
Reuse takeaway systems cut emissions substantially – report / NGOs call on authorities to factor in external costs of single-use / Some reuse options cheaper
09.10.2024
AGRICULTURAL PLASTICS FINLAND
Sumi subsidiary launches collection, recycling operations
09.10.2024
PLASTICS AND ENVIRONMENT
Pollution must be reduced 32% by 2035 to prevent further marine damage – study
08.10.2024
FRANCE
Government reverses decision on polystyrene packaging ban / Move welcomed in packaging sector
07.10.2024
PACKAGING RECYCLING EUROPE
Revenue from non-recycled plastic packaging falls short / Court of Auditors warns against fraud
02.10.2024
PLASTICS AND ENVIRONMENT
India overtakes China as biggest polluter / 15% of global population lacks access to waste-collection services – Leeds university research
30.09.2024
RECYCLING UK
Recoup, Sherbourne Recycling partner on sortability tests for plastic packaging / Data to be shared with producers, brand owners
27.09.2024
PETROINEOS
Grangemouth refinery to shut in Q2 2025 / Massive losses / Other petchem operations on-site unaffected
26.09.2024
USA
Revised recycling law draft in Congress seeks 30% recyclate in plastic packaging / Bucshon, Davis look to stimulate private sector investment
26.09.2024
RECYCLING SWITZERLAND
Association to start collecting plastic packaging, drink cartons in October
24.09.2024
PACKAGING USA
Plastics Pact expands materials list for potential elimination by 2030 / More items to be evaluated for possible removal in 2026
24.09.2024
BOREALIS
Supply of chemically recycled PE for water pipes in Vienna
24.09.2024
INDORAMA VENTURES
Build-up of PET recycling capacity in India / Stiffer mandates for packaging
23.09.2024
PACKAGING RECYCLING GERMANY
ZSVR publishes new minimum standard / Smaller PE film waste, coextruded PE/PA/EVOH barrier film classed as recyclable
20.09.2024
PACKAGING NETHERLANDS
Circular strategies could cut demand for virgin plastic packaging by two-thirds – study / More policies focussed on alternative raw materials essential
19.09.2024
EPS RECYCLING
EPSolutely pilot project gathers insulation board trimmings in Austria / QR codes on collection bags help boost reclaim
19.09.2024
COVESTRO
Collaboration with Carlisle on bio-circular building materials / German partner to contribute MDI
17.09.2024
FREEPOINT ECO-SYSTEMS
Office in Germany to procure plastics waste for Belgian pyrolysis plant / 80,000 t/y recycling facility in the works in Netherlands
17.09.2024
CIRCULAR ECONOMY
Roadmap aims to turn rhetoric into action / Manufactured goods, processes account for one third of the Earth's overshood – Deloitte report
13.09.2024
RESEARCH
Scientists develop catalytic recycling process for post-consumer PE, PP
12.09.2024
MARINE LITTER
The Ocean Cleanup declares mission accomplished / Great Pacific Garbage Patch could be plastic-free within 10 years
11.09.2024
RESEARCH
Swiss scientists improve chemical recycling process for polyolefins / Stirring speed, stirrer design are key, say researchers
10.09.2024
Seite 1 von 75
Topic search
Plastics Information Europe
  • Polymer Prices (5.833)
    • Petrochemicals (428)
    • Standard Thermoplastics (913)
    • PET (240)
    • Engineering Thermoplastics (246)
    • Recyclate (349)
      • Standard Thermoplastics / Recyclate (174)
      • Engineering Thermoplastics / Recyclate (175)
    • Polyurethanes (237)
    • High Performance Polymers (2)
    • Composites (174)
    • Announcements (2.554)
    • World Regions (558)
      • China (275)
        • Standard Thermoplastics (139)
        • Engineering Thermoplastics (136)
      • North America (159)
      • Russia (124)
    • Spot Prices (116)
    • Forecasts (16)
  • Companies (32.963)
    • Polymer Materials (16.321)
      • Petrochemicals (2.937)
      • Charge (1.789)
        • General (89)
        • Masterbatches (332)
        • Additives (744)
        • Colours (365)
        • Reinforcements/Fillers (259)
      • Polymers (10.473)
        • General (667)
        • Standard Thermoplastics (3.632)
          • General (113)
          • Polyolefins (1.841)
          • Polystyrenes (322)
          • PVC (637)
          • Polyester (535)
          • Expandable (PS, PP, PE) (184)
        • Technical Thermoplastics (3.100)
          • General (347)
          • Styrene Copolymers (248)
          • PC/PMMA (435)
          • Polyamides (853)
          • POM/PBT/PP (301)
          • Technical Compounds (916)
        • PUR (754)
        • Other (2.320)
          • General (99)
          • Composites/Thermosets (394)
          • High Performance (579)
          • Biopolymers (673)
          • Elastomers/TPE (352)
          • Recyclate (223)
      • Distribution (1.122)
    • Machinery (1.056)
      • General (27)
      • Plant Construction (129)
      • Core Machines (723)
        • General (88)
        • Extrusion (175)
        • Injection Moulding (357)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (173)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.817)
      • General (851)
      • Extrusion (2.245)
        • General (110)
        • Flexible Films (1.083)
        • Rigid Films/Sheet (363)
        • Pipes (337)
        • Profiles/Rods (255)
        • Other (97)
      • Injection Moulding (1.634)
      • Blow Moulding (490)
      • PUR (283)
      • Other (1.082)
        • General (114)
        • Foam (301)
        • Composites/Thermosets (334)
        • Thermoforming (208)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (232)
    • Application (6.980)
      • General (125)
      • Packaging (3.013)
      • Construction (693)
      • Automotive / Transport (1.597)
      • Electrical Appliances (325)
      • Consumer Goods (650)
      • Medical (375)
      • Technical (202)
    • Other (1.789)
      • Recycling/Disposal (1.448)
      • Services (247)
      • Logistics (94)
  • Commercial Register (107)
    • Insolvency (102)
    • Changes (5)
  • Markets (22.052)
    • Polymer Materials (9.560)
      • Petrochemicals (2.325)
      • Charge (828)
        • General (38)
        • Masterbatches (90)
        • Additives (329)
        • Colours (152)
        • Reinforcements/Fillers (219)
      • Polymers (6.047)
        • General (707)
        • Standard Thermoplastics (2.326)
          • General (74)
          • Polyolefins (1.152)
          • Polystyrenes (154)
          • PVC (481)
          • Polyester (331)
          • Expandable (PS, PP, PE) (134)
        • Technical Thermoplastics (1.230)
          • General (87)
          • Styrene Copolymers (100)
          • PC/PMMA (144)
          • Polyamides (420)
          • POM/PBT/PP (106)
          • Technical Compounds (373)
        • PUR (440)
        • Other (1.344)
          • General (45)
          • Composites/Thermosets (286)
          • High Performance (293)
          • Biopolymers (414)
          • Elastomers/TPE (135)
          • Recyclate (171)
      • Other Materials (57)
      • Distribution (303)
    • Machinery (498)
      • General (127)
      • Plant Construction (14)
      • Core Machines (286)
        • General (109)
        • Extrusion (36)
        • Injection Moulding (120)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.637)
      • General (403)
      • Extrusion (596)
        • General (20)
        • Flexible Films (290)
        • Rigid Films/Sheets (116)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (176)
      • Blow Moulding (43)
      • PUR (76)
      • Other (299)
        • General (20)
        • Foam (77)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.855)
      • General (36)
      • Packaging (1.852)
      • Construction (296)
      • Automotive / Transport (922)
      • Electrical Appliances (211)
      • Consumer Goods (241)
      • Medical (196)
      • Technical (55)
      • Other (46)
    • Regions and Countries (4.007)
      • World (194)
      • German-speaking Countries (470)
      • Europe (1.940)
        • General (462)
        • Italy (142)
        • France (154)
        • Spain/Portugal (97)
        • Great Britain/Ireland (502)
        • Low Countries (74)
        • Central Europe (173)
        • Scandinavia (44)
        • Russia (106)
        • Eastern Europe (46)
        • Southeastern Europe (140)
      • North America (479)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.495)
      • Recycling/Disposal (1.875)
      • Economic Trend (331)
      • Services (41)
      • Logistics (195)
      • Energy (53)
  • Production and Engineering (3.648)
    • Polymer Materials (2.278)
      • Petrochemicals (55)
      • Charge (433)
        • General (12)
        • Masterbatches (111)
        • Additives (222)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.760)
        • General (28)
        • Standard Themoplastics (352)
        • Technical Thermoplastics (586)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (199)
          • POM/PBT/PP (65)
          • Technical Compounds (180)
        • PUR (67)
        • Other (727)
          • General (21)
          • Composites/Thermosets (106)
          • High Performance (158)
          • Biopolymers (233)
          • Elastomers/TPE (111)
          • Recyclate (98)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (414)
      • Polymer Materials (138)
      • Technical (12)
      • Product Development (40)
      • Process (80)
      • Application (88)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (52)
    • New Products (824)
      • Packaging (540)
      • Construction (34)
      • Automotive / Transport (97)
      • Electrical Appliances (26)
      • Consumer Goods (48)
      • Medical (36)
      • Technical (7)
      • Other (36)
    • Other (38)
  • Management (621)
    • Purchasing (98)
    • General Management (131)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (88)
    • Logistics (240)
  • People (1.470)
  • Industry (5.655)
    • General (1.126)
    • Associations/Institutions (2.184)
    • Legislation (1.183)
    • Environment / Health (1.152)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.117)
  • Plastic Fantastic (515)
  • Commentaries (77)
  • Interviews (130)
  • Notes by Publisher (68)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 14/10/2024
Ref: jzbqp245gk0l4g55fa2lugic
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_223639&node=100277