www.pieweb.com
Strengthen your position in business negotiations!
  • European market reports for standard and engineering,
    thermoplastics, polyurethanes, recyclate, composites/GRP,
    feedstocks – more than 100 grades of polymer covered.
  • MyPrices – individually configured reports and e-mail alerts
  • Comparative and analytical tools

Polymer Prices World Regions Russia

POLYMER PRICES
Russia July 2019: Prices on the decline due to weak demand / August should witness stabilisation
08.08.2019
POLYMER PRICES
Russia June 2019: Demand still sluggish / Slump in prices / PVC driven solely by demand from construction sector / Stabilisation the target for July
09.07.2019
POLYMER PRICES
Russia May 2019: Overall market still quite weak / Only PVC shows slight upward movement
13.06.2019
POLYMER PRICES
Russia April 2019: Continuing subdued demand results in largely stagnating notations / No substantial change in sight
13.05.2019
POLYMER PRICES
Russia March 2019: Polyolefins give way / Otherwise moderate increases / Prices rising in April
08.04.2019
POLYMER PRICES
Russia February 2019: Polyolefins generally giving way / Demand remains rather weak
08.03.2019
POLYMER PRICES
Russia January 2019: Polymer markets dormant / Predominantly sideways movement in February
11.02.2019
POLYMER PRICES
Russia December 2018: Market remains weak / Prices falling across the board / Stabilisation in January
10.01.2019
POLYMER PRICES
Russia November 2018: Market shifts down a gear / Demand significantly more subdued
11.12.2018
POLYMER PRICES
Russia October 2018: Prices stagnate for most standard thermoplastics / PS trends upward / PET slumps with declining demand
15.11.2018
POLYMER PRICES
Russia September 2018: Upward trend continuing / PE particularly hard hit / No relief in sight
10.10.2018
POLYMER PRICES
Russia August 2018: Further upward movement / Rouble decline slows imports / PET in short supply / Hikes in September
11.09.2018
POLYMER PRICES
Russia July 2018: Upswing dominates market / PET prices in downward turnaround
08.08.2018
POLYMER PRICES
Russia June 2018: PET still climbing / Upward pressure continuing overall / Almost double-digit percentage increase in PP pipe grades / Substantial hikes for PS too / No summer lull in sight so far
09.07.2018
POLYMER PRICES
Russia May 2018: Price explosion for PET continuing unabated / Overall upward movement
21.06.2018
POLYMER PRICES
Russia April 2018: Spring demand in full bloom / Prices moving upward / PET notations skyrocket
15.05.2018
POLYMER PRICES
Russia March 2018: Start of spring season drives prices / Continued upswing in April
10.04.2018
POLYMER PRICES
Russia February 2018: PE in decline / Prices otherwise firming slightly / PET climbs up to record high / Subdued demand overall / Hope for a revival in March
09.03.2018
POLYMER PRICES
Russia January 2018: Quiet month in terms of demand with little movement in most cases / PET still heading sharply upwards
12.02.2018
POLYMER PRICES
Russia December 2017: Polyolefins and PS stagnating / PVC plunges / Price hike for PET
10.01.2018
POLYMER PRICES
Russia November 2017: Notations falling / Only PP and PET showing slight upward movement / Stability in December
11.12.2017
POLYMER PRICES
Russia October 2017: Upward momentum of most notations fizzles out / Noticeable hikes only with PS and PVC
14.11.2017
POLYMER PRICES
Russia September 2017: Notations rising on a broad front / Short supply driving up prices
12.10.2017
POLYMER PRICES
Russia August 2017: Firming prices dominate picture / Further increases lined up for September
12.09.2017
POLYMER PRICES
Russia July 2017: Situation calming down / More expensive imports stabilise domestic notations
08.08.2017
Seite 1 von 4
Topic search
Plastics Information Europe
  • Polymer Prices (4.233)
    • Petrochemicals (206)
    • Standard Thermoplastics (591)
    • PET (177)
    • Engineering Thermoplastics (181)
    • Recyclate (227)
      • Standard Thermoplastics / Recyclate (113)
      • Engineering Thermoplastics / Recyclate (114)
    • Polyurethanes (176)
    • High Performance Polymers (2)
    • Composites (112)
    • Announcements (2.167)
    • World Regions (341)
      • China (152)
        • Standard Thermoplastics (77)
        • Engineering Thermoplastics (75)
      • North America (97)
      • Russia (92)
    • Spot Prices (53)
  • Companies (22.488)
    • Polymer Materials (11.075)
      • Petrochemicals (1.959)
      • Charge (1.350)
        • General (57)
        • Masterbatches (260)
        • Additives (544)
        • Colours (268)
        • Reinforcements/Fillers (221)
      • Polymers (6.922)
        • General (380)
        • Standard Thermoplastics (2.510)
          • General (87)
          • Polyolefins (1.223)
          • Polystyrenes (207)
          • PVC (475)
          • Polyester (376)
          • Expandable (PS, PP, PE) (142)
        • Technical Thermoplastics (2.029)
          • General (281)
          • Styrene Copolymers (158)
          • PC/PMMA (264)
          • Polyamides (519)
          • POM/PBT/PP (180)
          • Technical Compounds (627)
        • PUR (511)
        • Other (1.492)
          • General (76)
          • Composites/Thermosets (309)
          • High Performance (384)
          • Biopolymers (461)
          • Elastomers/TPE (236)
          • Rezyklate (26)
      • Distribution (844)
    • Machinery (912)
      • General (16)
      • Plant Construction (101)
      • Core Machines (636)
        • General (68)
        • Extrusion (154)
        • Injection Moulding (321)
        • Blow Moulding (64)
        • Foam (10)
        • PUR (15)
        • Compression Moulding (4)
      • Peripherals (156)
        • General (26)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (84)
        • Components (13)
      • Finishing (3)
    • Processing (5.120)
      • General (644)
      • Extrusion (1.686)
        • General (80)
        • Flexible Films (783)
        • Rigid Films/Sheet (279)
        • Pipes (269)
        • Profiles/Rods (207)
        • Other (68)
      • Injection Moulding (1.220)
      • Blow Moulding (369)
      • PUR (202)
      • Other (814)
        • General (91)
        • Foam (222)
        • Composites/Thermosets (279)
        • Thermoforming (156)
        • Rotational Moulding (24)
        • Additive Manufacturing (42)
      • Finishing (185)
    • Application (4.730)
      • General (82)
      • Packaging (1.947)
      • Construction (498)
      • Automotive / Transport (1.178)
      • Electrical Appliances (249)
      • Consumer Goods (384)
      • Medical (261)
      • Technical (131)
    • Other (651)
      • Recycling/Disposal (507)
      • Services (144)
  • Commercial Register (66)
    • Insolvency (61)
    • Changes (5)
  • Markets (14.476)
    • Polymer Materials (6.266)
      • Petrochemicals (1.491)
      • Charge (633)
        • General (30)
        • Masterbatches (73)
        • Additives (239)
        • Colours (104)
        • Reinforcements/Fillers (187)
      • Polymers (3.948)
        • General (300)
        • Standard Thermoplastics (1.671)
          • General (47)
          • Polyolefins (818)
          • Polystyrenes (106)
          • PVC (351)
          • Polyester (237)
          • Expandable (PS, PP, PE) (112)
        • Technical Thermoplastics (808)
          • General (74)
          • Styrene Copolymers (57)
          • PC/PMMA (104)
          • Polyamides (272)
          • POM/PBT/PP (66)
          • Technical Compounds (235)
        • PUR (307)
        • Other (862)
          • General (31)
          • Composites/Thermosets (226)
          • High Performance (218)
          • Biopolymers (279)
          • Elastomers/TPE (95)
          • Recyclate (13)
      • Other Materials (12)
      • Distribution (182)
    • Machinery (424)
      • General (103)
      • Plant Construction (11)
      • Core Machines (242)
        • General (85)
        • Extrusion (31)
        • Injection Moulding (105)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.289)
      • General (264)
      • Extrusion (482)
        • General (18)
        • Flexible Films (227)
        • Rigid Films/Sheets (91)
        • Pipes (64)
        • Profiles/Rods (75)
        • Other (7)
      • Injection Moulding (170)
      • Blow Moulding (36)
      • PUR (58)
      • Other (238)
        • General (18)
        • Foam (52)
        • Composites/Thermosets (125)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (15)
      • Finishing (41)
    • Applications (2.324)
      • General (19)
      • Packaging (984)
      • Construction (212)
      • Automotive / Transport (657)
      • Electrical Appliances (165)
      • Consumer Goods (125)
      • Medical (102)
      • Technical (37)
      • Other (23)
    • Regions and Countries (3.426)
      • World (169)
      • German-speaking Countries (386)
      • Europe (1.659)
        • General (375)
        • Italy (124)
        • France (148)
        • Spain/Portugal (73)
        • Great Britain/Ireland (443)
        • Low Countries (73)
        • Central Europe (165)
        • Scandinavia (39)
        • Russia (83)
        • Eastern Europe (36)
        • Southeastern Europe (100)
      • North America (393)
      • Asia (576)
        • General (103)
        • China (328)
        • Japan (46)
        • Korea (24)
        • India (75)
      • Middle East (134)
      • Other (34)
      • South America (75)
    • Other (747)
      • Recycling/Disposal (682)
      • Economic Trend (44)
      • Services (21)
  • Production and Engineering (2.431)
    • Polymer Materials (1.573)
      • Petrochemicals (26)
      • Charge (312)
        • General (12)
        • Masterbatches (69)
        • Additives (160)
        • Colours (36)
        • Reinforcements/Fillers (35)
      • Polymers (1.211)
        • General (15)
        • Standard Themoplastics (229)
        • Technical Thermoplastics (459)
          • General (17)
          • Styrene Copolymers (40)
          • PC/PMMA (45)
          • Polyamides (158)
          • POM/PBT/PP (52)
          • Technical Compounds (147)
        • PUR (52)
        • Other (456)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (120)
          • Biopolymers (144)
          • Elastomers/TPE (82)
      • Other (24)
    • Machinery (83)
      • Extrusion (17)
        • General (7)
        • Flexible Films (4)
        • Calender (3)
        • Pipes/Profiles (3)
      • Injection Moulding (30)
        • General (14)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (230)
      • Polymer Materials (82)
      • Technical (10)
      • Product Development (26)
      • Process (53)
      • Application (45)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (12)
    • New Products (520)
      • Packaging (318)
      • Construction (26)
      • Automotive / Transport (69)
      • Electrical Appliances (21)
      • Consumer Goods (30)
      • Medical (26)
      • Technical (7)
      • Other (23)
    • Other (25)
  • Management (116)
    • Purchasing (23)
    • General Management (30)
    • Company organisation (26)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (26)
  • People (1.185)
  • Industry (2.607)
    • General (633)
    • Associations/Institutions (1.101)
    • Legislation (579)
    • Environment / Health (294)
  • Events (908)
  • Plastic Fantastic (336)
  • Commentaries (48)
  • Interviews (56)
  • Notes by Publisher (23)
© 2019 by Plastics Information Europe, Bad Homburg
Date of print: 26/08/2019
Ref: jvgmfl453khpda45k5t5ws20
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=article&node=100518