www.pieweb.com
Strengthen your position in business negotiations!
  • European market reports for standard and engineering,
    thermoplastics, polyurethanes, recyclate, composites/GRP,
    feedstocks – more than 100 grades of polymer covered.
  • MyPrices – individually configured reports and e-mail alerts
  • Comparative and analytical tools

More about

POLYMER PRICES
Russia October 2017: Upward momentum of most notations fizzles out / Noticeable hikes only with PS and PVC
14.11.2017
NIZHNEKAMSKNEFTEKHIM
Plans for additional ethylene plant in Tatarstan / Capacity to reduce Russia's reliance on raw material imports
09.11.2017
POLYMER PRICES
Russia July 2016: Mostly smooth sailing / Angarsk hub resumes production only to suffer renewed technical glitch / Poor demand takes LDPE down / Tight availability drives PVC further up
04.08.2016
POLYMER PRICES
Russia October 2015: Notations down across the board / Only PS prices rise slightly / HDPE extrusion grades see steepest fall / Further declines in the cards for November
06.11.2015
ABS
Solid growth on a global basis / Worldwide capacities of 10m t/y / Asia dominates production and consumption / Restructuring in Europe makes an impact / Market players still face challenges
11.08.2015
LANXESS
Earnings guidance for 2015 revised upward / Strong growth for Performance Polymers EBITDA in Q2 / Rubber units to be carved out / Talks with potential partners continue
11.08.2015
KAZANORGSINTEZ
Latest Russian PE producer to fall victim to “Phoenix” scam / Material fraudulently ascribed
22.07.2015
POLYMER PRICES
Russia June 2015: Rises across the board / PET the sole exception / Uptrend unlikely to end in July as maintenance season gets underway
01.07.2015
NIZHNEKAMSKNEFTEKHIM
Russian producer warns processors about product fraudulently ascribed to it
29.06.2015
POLYMER PRICES
Russia April 2015: Maintenance and high export activity take LDPE notations through the roof / PP follows at a less steeper pace / High feedstock costs and few import alternatives drive up PS / PVC rolls over / PET with slight losses
11.05.2015
INTERNATIONAL PLASTICS INDUSTRY
Most producers see sales and earnings improvement in 2014 / Cautious optimism for 2015 / Falling raw materials prices and strengthening demand provide impetus / Currency shift will boost European companies
06.03.2015
NIZHNEKAMSKNEFTEKHIM
Operating profit and revenues increase / Plastics segment drives gains thanks to new PS line / Feasibility study for olefins complex
06.03.2015
POLYMER PRICES
Russia February 2015: Little market activity / Slight rises for most polymers / Only HDPE blow moulding, EPS and homo PP pointing down / Volatile exchange rate could lead to additional increases in March
05.03.2015
POLYMER PRICES
Russia January 2015: Slow month sees slight rises in most polymer notations / Many plants idled during national holidays / Currency exchange rate continues to wreak havoc / February likely to see further increases
03.02.2015
POLYMER PRICES
Russia December 2014: Economic crisis drives up polymer notations / Volatile exchange rate propels cost of imported materials to unaffordable heights / PET rises by almost 20% / Future outlook uncertain
08.01.2015
POLYMER PRICES
Russia November 2014: Currency effect drives euro notations down / Rouble prices a mixed bag / HDPE injection moulding grades tight and expensive / PP and PET firmer / PVC flagging
04.12.2014
POLYMER PRICES
Russia October 2014: Rouble continues to decline / Maintenance cycle mostly over / LDPE now pointing down / Volatile exchange rate could see rises for PS and PET / Other polymers likely to decline in November
06.11.2014
POLYMER PRICES
Russia September 2014: LDPE and HDPE tight and expensive / Euro notations feel currency effect as rouble continues to lose in value / PP and PVC pointing down / PS and PET roll over / Little change expected in October
06.10.2014
POLYMER PRICES
Russia August 2014: Maintenance cycles drive up PE, PP and PVC notations / PS and PET mostly quiet / PP availability could improve in late September / PVC tightness expected to last into November
04.09.2014
NIZHNEKAMSKNEFTEKHIM
PP grade with high transparency launched
18.07.2014
NIZHNEKAMSKNEFTEKHIM
“External factors” see 2013 EBITDA drop by 42% year-on-year / Profits down 60% / Plastics output up 6.8% / Modernisation efforts to continue in 2014
01.04.2014
RUSSIA
Engineering thermoplastics consumption recovers slightly in 2013 / Gains driven by ABS and PMMA / Import volumes of PC, PA and SAN down / Asian producers increasingly step into the fold / Low local capacity utilisation rates / Plastinfo report
18.02.2014
NIZHNEKAMSKNEFTEKHIM
Polymer sales increase helps offset fall in overall revenues / Styrenics sees greatest gains while PP output drops / Plans for further PS projects
12.09.2013
POLYMER PRICES
Russia August 2013: Prices continue to rise / Speed of decline in the value of the ruble slows briefly / Strong demand for PP pipe grade and PET
11.09.2013
POLYMER PRICES
Russia June 2013: Market on a downward trend / Little demand in July / Weak ruble works against exports
09.07.2013
Seite 1 von 2
© 2019 by Plastics Information Europe, Bad Homburg
Date of print: 12/11/2019
Ref: krm3ch55gqz1pf55o4eydrfv
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=320&key=Nizhnekamskneftekhim