www.pieweb.com

Industry Environment / Health

UNILEVER
Giant admits to failure of sustainability target / Management should “hang their heads in shame” – Greenpeace
13.05.2024
PLASTICS AND ENVIRONMENT
Industry initiative Operation Clean Sweep expands presence to 65 countries / 2023 Global Impact report
10.05.2024
UN PLASTICS TREATY
“The work is far from over”: Polymer production remains contentious in fourth session / Some convergence on waste management, recycling / 170 nations strive toward a global agreement
09.05.2024
PACKAGING EUROPE
“EU member states can exempt their economies for five years” / Lawyer Christian Alexander Mayer talks to PIE about special national routes for the PPWR
09.05.2024
PPWR
“Nobody knows how goods are supposed to be transported in Europe in the future” – IK criticises EU packaging regulation
09.05.2024
PLASTICS AND ENVIRONMENT
56 companies responsible for half of branded plastics pollution – survey / Researchers call for reduced plastics production in FMCG
08.05.2024
FRANCE
Activists say European deposit refund schemes no silver bullet / Surge in consumption expected as one consequence of return systems / Elipso dismisses claims as biased
30.04.2024
PFAS
UN declares DuPont and Chemours violated human rights for contaminating water / EPA sets new drinking water standards
26.04.2024
EU PACKAGING
Parliament adopts updated PPWR / Rules “require practical implementation” – Plastics Europe MD
26.04.2024
PLASTICS WASTE
“Producing less material is the solution, not recycling” / UK households throw away 1.7 bn pieces of plastics every week – Greenpeace report
25.04.2024
TRINSEO
Flame-retardant grades made without PFAS, halogenated additives
23.04.2024
LIFE CYCLE ANALYSIS
Study shows alternatives to plastics increase GHG emissions
22.04.2024
PETROCHEMICALS USA
Environmental Protection Agency steps up action against chemical companies / 218 plants affected
17.04.2024
PFAS
French national assembly launches go-it-alone move on PFAS / EU accused of foot dragging / Sénat will have final say / Not all NGOs on board
15.04.2024
RECUP
Deposit system for to-go food, drinks expands to Austria
15.04.2024
PLASTICS WASTE
UK firm fined EUR 1 mn for illegal waste shipment / Italy seizes 82.5 t mixed waste headed for Africa
11.04.2024
PLASTICS RECYCLING UK
Campaign launched to raise recycling awareness among consumers / BPF, ESA aim to tap into online influencers and others
09.04.2024
PLASTICS AND ENVIRONMENT
Parliament's ENVI committee backs EU's Zero Pellet Loss proposal / NGOs not fully satisfied
02.04.2024
BIOPLASTICS
Biodegradable polymers decompose on deep-sea floor – University of Tokyo / Rate of degradation on deep-sea floor slower than onshore
27.03.2024
LYONDELLBASELL
Swedish masterbatch production site earns zero pellet loss certification
25.03.2024
MICROPLASTICS
Effective environmental solutions elude, but Chinese team finds quick fix to health challenge / Drinking boiled water helps
22.03.2024
EGYPT
International partnership uses blockchain platform to boost plastics recycling
21.03.2024
PLASTICS WASTE
European Parliament votes for stricter rules / Ban on exports / Trade bodies voice concern on recycling repercussions
14.03.2024
EU PACKAGING
European legislators agree on PPWR rules / Bans and reuse, recycling targets / EUBP largely positive but NGO ZWE still has concerns
12.03.2024
USA
EPA to upgrade safety standards for high-risk chemical facilities / Stiffer mandates for prevention
12.03.2024
Seite 2 von 45
Topic search
Plastics Information Europe
  • Polymer Prices (5.754)
    • Petrochemicals (402)
    • Standard Thermoplastics (898)
    • PET (237)
    • Engineering Thermoplastics (243)
    • Recyclate (345)
      • Standard Thermoplastics / Recyclate (172)
      • Engineering Thermoplastics / Recyclate (173)
    • Polyurethanes (235)
    • High Performance Polymers (2)
    • Composites (171)
    • Announcements (2.547)
    • World Regions (550)
      • China (270)
        • Standard Thermoplastics (136)
        • Engineering Thermoplastics (134)
      • North America (156)
      • Russia (124)
    • Spot Prices (114)
    • Forecasts (10)
  • Companies (32.477)
    • Polymer Materials (16.092)
      • Petrochemicals (2.887)
      • Charge (1.776)
        • General (88)
        • Masterbatches (331)
        • Additives (736)
        • Colours (362)
        • Reinforcements/Fillers (259)
      • Polymers (10.314)
        • General (651)
        • Standard Thermoplastics (3.577)
          • General (112)
          • Polyolefins (1.808)
          • Polystyrenes (318)
          • PVC (628)
          • Polyester (527)
          • Expandable (PS, PP, PE) (184)
        • Technical Thermoplastics (3.064)
          • General (345)
          • Styrene Copolymers (245)
          • PC/PMMA (425)
          • Polyamides (842)
          • POM/PBT/PP (300)
          • Technical Compounds (907)
        • PUR (743)
        • Other (2.279)
          • General (96)
          • Composites/Thermosets (389)
          • High Performance (571)
          • Biopolymers (663)
          • Elastomers/TPE (346)
          • Recyclate (214)
      • Distribution (1.115)
    • Machinery (1.052)
      • General (27)
      • Plant Construction (129)
      • Core Machines (720)
        • General (86)
        • Extrusion (175)
        • Injection Moulding (356)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (172)
        • General (31)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.733)
      • General (840)
      • Extrusion (2.212)
        • General (110)
        • Flexible Films (1.065)
        • Rigid Films/Sheet (360)
        • Pipes (331)
        • Profiles/Rods (252)
        • Other (94)
      • Injection Moulding (1.612)
      • Blow Moulding (486)
      • PUR (278)
      • Other (1.074)
        • General (114)
        • Foam (298)
        • Composites/Thermosets (332)
        • Thermoforming (205)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (231)
    • Application (6.862)
      • General (124)
      • Packaging (2.960)
      • Construction (682)
      • Automotive / Transport (1.571)
      • Electrical Appliances (319)
      • Consumer Goods (637)
      • Medical (371)
      • Technical (198)
    • Other (1.738)
      • Recycling/Disposal (1.413)
      • Services (244)
      • Logistics (81)
  • Commercial Register (105)
    • Insolvency (100)
    • Changes (5)
  • Markets (21.688)
    • Polymer Materials (9.416)
      • Petrochemicals (2.283)
      • Charge (826)
        • General (38)
        • Masterbatches (90)
        • Additives (328)
        • Colours (151)
        • Reinforcements/Fillers (219)
      • Polymers (5.949)
        • General (678)
        • Standard Thermoplastics (2.291)
          • General (74)
          • Polyolefins (1.136)
          • Polystyrenes (151)
          • PVC (472)
          • Polyester (325)
          • Expandable (PS, PP, PE) (133)
        • Technical Thermoplastics (1.219)
          • General (87)
          • Styrene Copolymers (98)
          • PC/PMMA (141)
          • Polyamides (415)
          • POM/PBT/PP (106)
          • Technical Compounds (372)
        • PUR (434)
        • Other (1.327)
          • General (43)
          • Composites/Thermosets (286)
          • High Performance (292)
          • Biopolymers (412)
          • Elastomers/TPE (132)
          • Recyclate (162)
      • Other Materials (57)
      • Distribution (301)
    • Machinery (495)
      • General (127)
      • Plant Construction (14)
      • Core Machines (283)
        • General (106)
        • Extrusion (36)
        • Injection Moulding (120)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.626)
      • General (398)
      • Extrusion (592)
        • General (20)
        • Flexible Films (288)
        • Rigid Films/Sheets (115)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (176)
      • Blow Moulding (43)
      • PUR (76)
      • Other (297)
        • General (20)
        • Foam (75)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.778)
      • General (34)
      • Packaging (1.807)
      • Construction (288)
      • Automotive / Transport (908)
      • Electrical Appliances (211)
      • Consumer Goods (237)
      • Medical (194)
      • Technical (55)
      • Other (44)
    • Regions and Countries (3.974)
      • World (194)
      • German-speaking Countries (464)
      • Europe (1.917)
        • General (456)
        • Italy (142)
        • France (153)
        • Spain/Portugal (96)
        • Great Britain/Ireland (496)
        • Low Countries (74)
        • Central Europe (172)
        • Scandinavia (44)
        • Russia (101)
        • Eastern Europe (45)
        • Southeastern Europe (138)
      • North America (475)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.399)
      • Recycling/Disposal (1.814)
      • Economic Trend (311)
      • Services (40)
      • Logistics (182)
      • Energy (52)
  • Production and Engineering (3.610)
    • Polymer Materials (2.261)
      • Petrochemicals (53)
      • Charge (430)
        • General (12)
        • Masterbatches (110)
        • Additives (220)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.748)
        • General (28)
        • Standard Themoplastics (351)
        • Technical Thermoplastics (584)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (198)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (719)
          • General (21)
          • Composites/Thermosets (106)
          • High Performance (158)
          • Biopolymers (231)
          • Elastomers/TPE (109)
          • Recyclate (94)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (406)
      • Polymer Materials (135)
      • Technical (12)
      • Product Development (40)
      • Process (78)
      • Application (87)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (50)
    • New Products (811)
      • Packaging (529)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (26)
      • Consumer Goods (47)
      • Medical (36)
      • Technical (7)
      • Other (36)
    • Other (38)
  • Management (593)
    • Purchasing (96)
    • General Management (123)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (85)
    • Logistics (225)
  • People (1.455)
  • Industry (5.498)
    • General (1.107)
    • Associations/Institutions (2.131)
    • Legislation (1.141)
    • Environment / Health (1.109)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.112)
  • Plastic Fantastic (503)
  • Commentaries (77)
  • Interviews (122)
  • Notes by Publisher (68)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 24/07/2024
Ref: wn4jccq4jtzzr145bafabe55
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/Default.aspx?pageid=302&referrer=mehraus_253993&node=100545&page=2