Show topic list

Markets Regions and Countries Europe

ARKEMA Restructuring of vinyls chain continuing / Two French sites targeted / Nearly 170 jobs on the line	03.12.2008
FINMECCANICA Aerospace supplier plans joint ventures with Russian firm	02.12.2008
KEY PLASTICS French-Slovakian unit in administration / Massive job cuts / "Facilities far oversized,” auto supplier says	01.12.2008
POLIMERI EUROPA Entire petrochemicals complex in Sardinia to go offline for two months / Cracker, HDPE, chlorine chain and aromatics affected / Phenol chain down for all of 2009	01.12.2008
PLASTICS MACHINERY Euromap sees dark clouds on horizon for European manufacturers after record 2007 / Order downturn of “historic dimensions / Association forecasts lower sales for 2009 / Very strong global market position	01.12.2008
CHINA Anti-dumping investigation into polyamide imports from the EU, USA and Taiwan	01.12.2008
ROMPETROL Polyethylene production reduced by 55% for two months / Nearly a quarter of the workforce to be temporarily laid off	28.11.2008
TERAPLAST Relocation of PVC pipe production / Ambitious expansion program up until 2013	28.11.2008
EUROPEAN CHEMICAL INDUSTRY Cefic forecasts decline in output of 0.6% in 2008	28.11.2008
SABIC Cracker in Geleen stays offline	27.11.2008
ARKEMA Production cutbacks for PA, PMMA and PVC	26.11.2008
EUROPEAN PLASTICS MARKETS Demand again grew faster than GDP in 2007 / Consumption 52.5m t / Germany still the biggest producer / Half of European plastics waste is recycled / PlasticsEurope report “Compelling Facts about Plastics 2007” on the EU27 plus Norway and Switzerland	25.11.2008
BASF “Definitive final result” shows Ciba stake at almost 95%	24.11.2008
LA SEDA Financing obtained for Portuguese PTA plant / Interquisa acquisition finally falls through	21.11.2008
ALPHACAN Sanitary and heating pipes business divested	21.11.2008
ALBIS PLASTIC New distributor for BASF polymers in Benelux and France	20.11.2008
BASF Ciba stake of 94.6% nailed down / Final result this week	19.11.2008
AUTOMOTIVE First German supplier insolvency averted for now / Automakers grouping criticises bank policies / Short-time working and extended leave	18.11.2008
OLTCHIM Scaling back production to 40% of capacity / Sourcing of C2 and C3 from Arpechim halted / Job cuts	18.11.2008
CABLE INDUSTRY Europe: 1.3m t polymers for cables in 2008 / Market still dominated by PVC / PE steadily gaining ground / Big regional variations / Demand highest in Italy / Publication of AMI's latest guide	17.11.2008
INTERQUISA Shutdown of 630,000 t/y PTA plant in San Roque / Rising Asian imports hit profitability	14.11.2008
ROHM AND HAAS Additives plant starts up in Turkey	13.11.2008
FAIRS / EXHIBITIONS “EPLA international fair of plastics and rubber processing”	13.11.2008
AMCOR FLEXIBLES “No more extrusion facilities to be closed”	11.11.2008
EVONIK Russian “Plexiglas” sheet jv to triple capacity	11.11.2008

Seite 45 von 81

Topic search

Plastics Information Europe

Polymer Prices (6.371)
- Petrochemicals (572)
- Standard Thermoplastics (1.024)
- PET (259)
- Engineering Thermoplastics (267)
- Recyclate (396)
  - General (6)
  - Standard Thermoplastics / Recyclate (195)
  - Engineering Thermoplastics / Recyclate (195)
- Polyurethanes (259)
- High Performance Polymers (2)
- Composites (193)
- Announcements (2.623)
- World Regions (617)
  - China (314)
    - Standard Thermoplastics (158)
    - Engineering Thermoplastics (156)
  - North America (179)
  - Russia (124)
- Spot Prices (135)
- Forecasts (24)
Companies (36.265)
- Polymer Materials (17.840)
  - Petrochemicals (3.240)
  - Charge (1.921)
    - General (99)
    - Masterbatches (343)
    - Additives (811)
    - Colours (393)
    - Reinforcements/Fillers (275)
  - Polymers (11.479)
    - General (742)
    - Standard Thermoplastics (3.985)
      - General (113)
      - Polyolefins (2.028)
      - Polystyrenes (356)
      - PVC (701)
      - Polyester (579)
      - Expandable (PS, PP, PE) (208)
    - Technical Thermoplastics (3.371)
      - General (352)
      - Styrene Copolymers (272)
      - PC/PMMA (479)
      - Polyamides (954)
      - POM/PBT/PP (327)
      - Technical Compounds (987)
    - PUR (812)
    - Other (2.569)
      - General (105)
      - Composites/Thermosets (414)
      - High Performance (642)
      - Biopolymers (715)
      - Elastomers/TPE (382)
      - Recyclate (311)
  - Distribution (1.200)
- Machinery (1.130)
  - General (32)
  - Plant Construction (145)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (184)
    - General (34)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.442)
  - General (934)
  - Extrusion (2.421)
    - General (128)
    - Flexible Films (1.172)
    - Rigid Films/Sheet (391)
    - Pipes (358)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.808)
  - Blow Moulding (534)
  - PUR (335)
  - Other (1.163)
    - General (129)
    - Foam (316)
    - Composites/Thermosets (360)
    - Thermoforming (228)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (247)
- Application (7.656)
  - General (139)
  - Packaging (3.307)
  - Construction (756)
  - Automotive / Transport (1.757)
  - Electrical Appliances (354)
  - Consumer Goods (703)
  - Medical (414)
  - Technical (226)
- Other (2.197)
  - Recycling/Disposal (1.759)
  - Services (260)
  - Logistics (178)
Commercial Register (165)
- Insolvency (159)
- Changes (6)
Markets (24.753)
- Polymer Materials (10.670)
  - Petrochemicals (2.632)
  - Charge (885)
    - General (40)
    - Masterbatches (99)
    - Additives (349)
    - Colours (162)
    - Reinforcements/Fillers (235)
  - Polymers (6.749)
    - General (872)
    - Standard Thermoplastics (2.546)
      - General (74)
      - Polyolefins (1.273)
      - Polystyrenes (167)
      - PVC (525)
      - Polyester (364)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.357)
      - General (89)
      - Styrene Copolymers (116)
      - PC/PMMA (163)
      - Polyamides (475)
      - POM/PBT/PP (114)
      - Technical Compounds (400)
    - PUR (477)
    - Other (1.497)
      - General (47)
      - Composites/Thermosets (302)
      - High Performance (314)
      - Biopolymers (441)
      - Elastomers/TPE (147)
      - Recyclate (246)
  - Other Materials (61)
  - Distribution (343)
- Machinery (528)
  - General (133)
  - Plant Construction (15)
  - Core Machines (308)
    - General (118)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.762)
  - General (469)
  - Extrusion (628)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (75)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.370)
  - General (51)
  - Packaging (2.115)
  - Construction (344)
  - Automotive / Transport (1.022)
  - Electrical Appliances (230)
  - Consumer Goods (276)
  - Medical (213)
  - Technical (63)
  - Other (56)
- Regions and Countries (4.211)
  - World (196)
  - German-speaking Countries (500)
  - Europe (2.063)
    - General (507)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (526)
    - Low Countries (75)
    - Central Europe (181)
    - Scandinavia (46)
    - Russia (116)
    - Eastern Europe (58)
    - Southeastern Europe (143)
  - North America (498)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (148)
  - Other (40)
  - South America (83)
- Other (3.212)
  - Recycling/Disposal (2.275)
  - Economic Trend (534)
  - Services (41)
  - Logistics (278)
  - Energy (84)
Production and Engineering (3.847)
- Polymer Materials (2.396)
  - Petrochemicals (63)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.857)
    - General (31)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (74)
    - Other (777)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (161)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (812)
- Purchasing (109)
- General Management (195)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (338)
People (1.514)
Industry (6.631)
- General (1.286)
- Associations/Institutions (2.524)
- Legislation (1.473)
- Environment / Health (1.338)
- plas.TV - Plastics unite(d) (10)
Events (1.183)
Plastic Fantastic (579)
Commentaries (85)
Interviews (164)
Notes by Publisher (81)