www.pieweb.com

Production and Engineering Polymers Standard Themoplastics

AVIENT
Expansion of bio-based polyolefin rage / Grades use cellulose fibre, recycled coffee grounds
21.02.2023
AVIENT
Introduction of sustainable metal-filled materials
01.02.2023
BOREALIS
Acquisition of majority stake in Belgian chemical recycling start-up Renasci
16.01.2023
NOVA CHEMICALS
Launch of 100% PCR rPE for packaging
14.11.2022
AVIENT
Gravi-Tech PP grades to replace metal in cosmetic products
14.11.2022
TOTALENERGIES
Launch of low-carbon polymers
26.10.2022
WESTLAKE VINNOLIT
Bio-attributed GreenVin PVC launched
21.10.2022
SABIC
K 2022: Global market to be “very challenging” in early 2023 / Circular BOPP wrapper with Mars Wrigley
19.10.2022
PET / POLYAMIDE
Pakistan floods could raise global prices / Loss of cotton harvest likely / Will synthetic fibre demand surge as in 2010/2011?
11.10.2022
JSP
Higher prices for expanded PP
06.10.2022
GEON PERFORMANCE POLYMERS
Former PolyOne PVC unit up for resale?
03.08.2022
INEOS
Millions to be spent on production technology for recyclable, mono-material films
27.07.2022
RECYCLING EUROPE
Circular Plastics Alliance extends coverage of MORE platform to rPVC
20.07.2022
RECYCLING USA
US Plastics Pact oversight group creates PET reclaim scheme / Initial funding target set at USD 25 mn
08.07.2022
INEOS STYROLUTION
Agreement to access styrene monomer made from post-consumer waste / Indaver‘s depolymerisation plant said to be first in Europe / Launch of bio-based ASA, SBC products
22.06.2022
SABIC
UK label manufacturer uses PP made from ocean-bound plastics
13.06.2022
INEOS STYROLUTION
Greek processor selects recycled PS for food packaging / New grade launched in Asia
30.05.2022
PLASTICS AND ENVIRONMENT
Study for European Commission explores scenarios for PVC phase-out
02.05.2022
ELIX POLYMERS
Partnership with suppliers of sustainable ABS precursors
25.04.2022
SABIC
Mattel to incorporate Trucircle renewable polymers in products globally
12.04.2022
RECYCLING
Study says rPET can contaminate drinks more than virgin resin / Researchers call for “super cleaning”
31.03.2022
VYNOVA
Two new hydrogen-fired steam boilers expected to cut carbon footprint
22.03.2022
BASF
Neopor EPS grade contains 10% recyclate / Mass balance approach
15.03.2022
INOVYN
Plans to boost PVC speciality output / Increased Belgian production set for mid-2022 following delay
08.03.2022
PREGIS
Protective film made from 100% recycled content
24.02.2022
Seite 2 von 14
Topic search
Plastics Information Europe
  • Polymer Prices (5.643)
    • Petrochemicals (372)
    • Standard Thermoplastics (877)
    • PET (233)
    • Engineering Thermoplastics (239)
    • Recyclate (337)
      • Standard Thermoplastics / Recyclate (168)
      • Engineering Thermoplastics / Recyclate (169)
    • Polyurethanes (231)
    • High Performance Polymers (2)
    • Composites (167)
    • Announcements (2.534)
    • World Regions (538)
      • China (262)
        • Standard Thermoplastics (132)
        • Engineering Thermoplastics (130)
      • North America (152)
      • Russia (124)
    • Spot Prices (110)
    • Forecasts (3)
  • Companies (31.875)
    • Polymer Materials (15.782)
      • Petrochemicals (2.829)
      • Charge (1.748)
        • General (88)
        • Masterbatches (328)
        • Additives (725)
        • Colours (352)
        • Reinforcements/Fillers (255)
      • Polymers (10.109)
        • General (640)
        • Standard Thermoplastics (3.501)
          • General (112)
          • Polyolefins (1.760)
          • Polystyrenes (315)
          • PVC (618)
          • Polyester (514)
          • Expandable (PS, PP, PE) (182)
        • Technical Thermoplastics (3.014)
          • General (339)
          • Styrene Copolymers (241)
          • PC/PMMA (416)
          • Polyamides (828)
          • POM/PBT/PP (295)
          • Technical Compounds (895)
        • PUR (727)
        • Other (2.227)
          • General (94)
          • Composites/Thermosets (387)
          • High Performance (565)
          • Biopolymers (650)
          • Elastomers/TPE (342)
          • Recyclate (189)
      • Distribution (1.096)
    • Machinery (1.042)
      • General (26)
      • Plant Construction (127)
      • Core Machines (714)
        • General (84)
        • Extrusion (174)
        • Injection Moulding (353)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (171)
        • General (30)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.657)
      • General (826)
      • Extrusion (2.193)
        • General (110)
        • Flexible Films (1.053)
        • Rigid Films/Sheet (358)
        • Pipes (329)
        • Profiles/Rods (249)
        • Other (94)
      • Injection Moulding (1.588)
      • Blow Moulding (484)
      • PUR (272)
      • Other (1.065)
        • General (114)
        • Foam (296)
        • Composites/Thermosets (328)
        • Thermoforming (202)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (229)
    • Application (6.735)
      • General (123)
      • Packaging (2.892)
      • Construction (670)
      • Automotive / Transport (1.543)
      • Electrical Appliances (317)
      • Consumer Goods (628)
      • Medical (368)
      • Technical (194)
    • Other (1.659)
      • Recycling/Disposal (1.356)
      • Services (239)
      • Logistics (64)
  • Commercial Register (99)
    • Insolvency (94)
    • Changes (5)
  • Markets (21.207)
    • Polymer Materials (9.205)
      • Petrochemicals (2.232)
      • Charge (811)
        • General (38)
        • Masterbatches (89)
        • Additives (324)
        • Colours (145)
        • Reinforcements/Fillers (215)
      • Polymers (5.812)
        • General (647)
        • Standard Thermoplastics (2.244)
          • General (73)
          • Polyolefins (1.111)
          • Polystyrenes (147)
          • PVC (467)
          • Polyester (316)
          • Expandable (PS, PP, PE) (130)
        • Technical Thermoplastics (1.200)
          • General (86)
          • Styrene Copolymers (97)
          • PC/PMMA (138)
          • Polyamides (411)
          • POM/PBT/PP (104)
          • Technical Compounds (364)
        • PUR (426)
        • Other (1.295)
          • General (41)
          • Composites/Thermosets (284)
          • High Performance (288)
          • Biopolymers (404)
          • Elastomers/TPE (132)
          • Recyclate (146)
      • Other Materials (57)
      • Distribution (293)
    • Machinery (492)
      • General (127)
      • Plant Construction (14)
      • Core Machines (280)
        • General (105)
        • Extrusion (35)
        • Injection Moulding (119)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.614)
      • General (392)
      • Extrusion (590)
        • General (20)
        • Flexible Films (287)
        • Rigid Films/Sheets (114)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (75)
      • Other (296)
        • General (20)
        • Foam (75)
        • Composites/Thermosets (135)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.673)
      • General (33)
      • Packaging (1.752)
      • Construction (281)
      • Automotive / Transport (877)
      • Electrical Appliances (210)
      • Consumer Goods (230)
      • Medical (192)
      • Technical (54)
      • Other (44)
    • Regions and Countries (3.937)
      • World (193)
      • German-speaking Countries (458)
      • Europe (1.896)
        • General (450)
        • Italy (139)
        • France (153)
        • Spain/Portugal (94)
        • Great Britain/Ireland (494)
        • Low Countries (74)
        • Central Europe (171)
        • Scandinavia (43)
        • Russia (96)
        • Eastern Europe (44)
        • Southeastern Europe (138)
      • North America (471)
      • Asia (662)
        • General (117)
        • China (387)
        • Japan (49)
        • Korea (26)
        • India (83)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.286)
      • Recycling/Disposal (1.754)
      • Economic Trend (283)
      • Services (40)
      • Logistics (164)
      • Energy (45)
  • Production and Engineering (3.555)
    • Polymer Materials (2.233)
      • Petrochemicals (52)
      • Charge (424)
        • General (12)
        • Masterbatches (108)
        • Additives (216)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.728)
        • General (27)
        • Standard Themoplastics (348)
        • Technical Thermoplastics (584)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (198)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (703)
          • General (21)
          • Composites/Thermosets (105)
          • High Performance (158)
          • Biopolymers (226)
          • Elastomers/TPE (107)
          • Recyclate (86)
      • Other (29)
    • Machinery (93)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (32)
    • Research (400)
      • Polymer Materials (134)
      • Technical (12)
      • Product Development (39)
      • Process (78)
      • Application (85)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (48)
    • New Products (791)
      • Packaging (513)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (25)
      • Consumer Goods (46)
      • Medical (35)
      • Technical (7)
      • Other (35)
    • Other (38)
  • Management (563)
    • Purchasing (93)
    • General Management (116)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (6)
    • Finances (85)
    • Logistics (206)
  • People (1.444)
  • Industry (5.292)
    • General (1.075)
    • Associations/Institutions (2.052)
    • Legislation (1.089)
    • Environment / Health (1.066)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.101)
  • Plastic Fantastic (492)
  • Commentaries (74)
  • Interviews (116)
  • Notes by Publisher (67)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 28/03/2024
Ref: 3ew4tw450blqt145gvhww155
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100288&pageid=302&page=2