Show topic list

Production and Engineering Polymer Materials Polymers

E-MOBILITY Aimplas' lightcar project to slash weight of electric-vehicle batteries by half	22.03.2022
VYNOVA Two new hydrogen-fired steam boilers expected to cut carbon footprint	22.03.2022
BERRY GLOBAL Establishment of centre of excellence in UK / Analysis of waste scrap to boost recyclate quality / Assistance in compliance with UK Plastics Tax	22.03.2022
BASF Neopor EPS grade contains 10% recyclate / Mass balance approach	15.03.2022
INOVYN Plans to boost PVC speciality output / Increased Belgian production set for mid-2022 following delay	08.03.2022
PREGIS Protective film made from 100% recycled content	24.02.2022
EVONIK Investment in US medical device start-up / Vestakeep PEEK used for implantable sternal closure	22.02.2022
BIESTERFELD Five new POM grades from DuPont / Products with sustainability focus	17.02.2022
NEW MATERIALS “2D” polymer from MIT forms sheets / Material stronger than steel / Properties suited to coatings, composites	16.02.2022
BASF Expansion of MDI portfolio / First greenhouse gas neutral aromatic isocyanate	14.02.2022
RESEARCH Development of two sugar-based polymers / Qualities said to be like common plastics / Custom mechanical properties, degradation rates reportedly possible	09.02.2022
BASF Expansion of PA, PPA market in Europe / Consolidation of Ultramid portfolio	08.02.2022
DSM Expansion of test capabilities for high voltage electric vehicles applications	07.02.2022
SOLVAY Recyclate-based HPPA for household appliances	02.02.2022
VÖSLAUER Austrian bottler expands reusable PET range / Savings of 400 t PET / Climate-neutral production	27.01.2022
FACE MASKS Sabic PP now used in local N95 mask production	24.01.2022
FOOD PACKAGING Milliken clarifier used to make clear PP for microwavable products / Development with Taiwanese thermoformer	20.01.2022
BAUSANO Custom extruders make composites with natural fibre waste / Use of recycling materials for profiles	18.01.2022
PLASTICS AND SUSTAINABILITY Polymer producers initiate mass supply chain management / Covestro, Dow and Ineos Styrolution win ISCC-PLUS certification	14.01.2022
RESEARCH Recyclate material use in white goods / Feasibility study by Fraunhofer Institute	14.01.2022
E-MOBILITY Spanish Aimplas develops alternative casings for electric car batteries	10.01.2022
REPSOL Low-carbon circular grades launched / Automotive and packaging applications	05.01.2022
APK Fully decolourised recyclates from post-consumer film waste	03.01.2022
TEIJIN LCA of carbon fibres begins / Identification of carbon hotpots in manufacturing	23.12.2021
SABIC PBT grades with recycled short-glass fibre	22.12.2021

Seite 12 von 65

Topic search

Plastics Information Europe

Polymer Prices (6.410)
- Petrochemicals (586)
- Standard Thermoplastics (1.030)
- PET (261)
- Engineering Thermoplastics (268)
- Recyclate (399)
  - General (6)
  - Standard Thermoplastics / Recyclate (196)
  - Engineering Thermoplastics / Recyclate (197)
- Polyurethanes (261)
- High Performance Polymers (2)
- Composites (194)
- Announcements (2.627)
- World Regions (620)
  - China (316)
    - Standard Thermoplastics (159)
    - Engineering Thermoplastics (157)
  - North America (180)
  - Russia (124)
- Spot Prices (137)
- Forecasts (25)
Companies (36.492)
- Polymer Materials (17.964)
  - Petrochemicals (3.260)
  - Charge (1.936)
    - General (99)
    - Masterbatches (344)
    - Additives (817)
    - Colours (400)
    - Reinforcements/Fillers (276)
  - Polymers (11.560)
    - General (747)
    - Standard Thermoplastics (4.015)
      - General (114)
      - Polyolefins (2.039)
      - Polystyrenes (361)
      - PVC (708)
      - Polyester (583)
      - Expandable (PS, PP, PE) (210)
    - Technical Thermoplastics (3.391)
      - General (352)
      - Styrene Copolymers (276)
      - PC/PMMA (480)
      - Polyamides (963)
      - POM/PBT/PP (331)
      - Technical Compounds (989)
    - PUR (817)
    - Other (2.590)
      - General (105)
      - Composites/Thermosets (417)
      - High Performance (650)
      - Biopolymers (719)
      - Elastomers/TPE (384)
      - Recyclate (315)
  - Distribution (1.208)
- Machinery (1.130)
  - General (32)
  - Plant Construction (145)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (184)
    - General (34)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.478)
  - General (938)
  - Extrusion (2.427)
    - General (129)
    - Flexible Films (1.176)
    - Rigid Films/Sheet (391)
    - Pipes (359)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.820)
  - Blow Moulding (540)
  - PUR (337)
  - Other (1.168)
    - General (131)
    - Foam (317)
    - Composites/Thermosets (360)
    - Thermoforming (230)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (248)
- Application (7.693)
  - General (141)
  - Packaging (3.317)
  - Construction (759)
  - Automotive / Transport (1.769)
  - Electrical Appliances (355)
  - Consumer Goods (710)
  - Medical (416)
  - Technical (226)
- Other (2.227)
  - Recycling/Disposal (1.780)
  - Services (262)
  - Logistics (185)
Commercial Register (168)
- Insolvency (162)
- Changes (6)
Markets (24.953)
- Polymer Materials (10.756)
  - Petrochemicals (2.649)
  - Charge (891)
    - General (40)
    - Masterbatches (100)
    - Additives (350)
    - Colours (165)
    - Reinforcements/Fillers (236)
  - Polymers (6.807)
    - General (883)
    - Standard Thermoplastics (2.566)
      - General (74)
      - Polyolefins (1.281)
      - Polystyrenes (169)
      - PVC (531)
      - Polyester (368)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.365)
      - General (90)
      - Styrene Copolymers (118)
      - PC/PMMA (163)
      - Polyamides (477)
      - POM/PBT/PP (116)
      - Technical Compounds (401)
    - PUR (481)
    - Other (1.512)
      - General (47)
      - Composites/Thermosets (304)
      - High Performance (316)
      - Biopolymers (445)
      - Elastomers/TPE (149)
      - Recyclate (251)
  - Other Materials (61)
  - Distribution (348)
- Machinery (530)
  - General (134)
  - Plant Construction (15)
  - Core Machines (309)
    - General (119)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.773)
  - General (479)
  - Extrusion (629)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.405)
  - General (52)
  - Packaging (2.133)
  - Construction (347)
  - Automotive / Transport (1.028)
  - Electrical Appliances (231)
  - Consumer Goods (278)
  - Medical (214)
  - Technical (64)
  - Other (58)
- Regions and Countries (4.228)
  - World (197)
  - German-speaking Countries (502)
  - Europe (2.074)
    - General (511)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (528)
    - Low Countries (75)
    - Central Europe (182)
    - Scandinavia (47)
    - Russia (116)
    - Eastern Europe (61)
    - Southeastern Europe (143)
  - North America (499)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (150)
  - Other (40)
  - South America (83)
- Other (3.261)
  - Recycling/Disposal (2.304)
  - Economic Trend (544)
  - Services (41)
  - Logistics (286)
  - Energy (86)
Production and Engineering (3.852)
- Polymer Materials (2.401)
  - Petrochemicals (65)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.860)
    - General (32)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (75)
    - Other (778)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (826)
- Purchasing (109)
- General Management (203)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (344)
People (1.515)
Industry (6.702)
- General (1.300)
- Associations/Institutions (2.549)
- Legislation (1.495)
- Environment / Health (1.348)
- plas.TV - Plastics unite(d) (10)
Events (1.192)
Plastic Fantastic (582)
Commentaries (86)
Interviews (165)
Notes by Publisher (83)