Show topic list

Production and Engineering

INEOS STYROLUTION Launch of high-flow “Novodur” ABS grade / Suitable for household and electronics applications	10.09.2019
CLARIANT Masterbatch for NIR-sortable black plastic packaging	09.09.2019
KRAIBURG TPE "Thermoplast M" range complies with new rules for medical-grade plastics	06.09.2019
PRESS LONDON UK drinks group rolls out bottles made from recycled and bioplastics	05.09.2019
BRÜGGEMANN Extension of additive range for virgin and recycled polyamide / Launch of products at "K 2019"	04.09.2019
INEOS STYROLUTION New fibre-reinforced ASA grade / Suitable for metal-plastic combinations and structural outdoor uses	30.08.2019
MICROPLASTICS Presence in run-off could threaten drinking water / Cautious WHO report says more data needed / Monomers leached into environment during polymerisation not primary concern	29.08.2019
RAUMEDIC New additive enhances sliding properties of medical plastic components	27.08.2019
BASF Products from chemically recycled material presented / Prototypes made by Jaguar Land Rover, Storopack, Südpack and Schneider Electric	22.08.2019
GABRIEL-CHEMIE Masterbatch for near-infrared sorting of black and coloured plastics	20.08.2019
EQUIPOLYMERS Food-grade PET with up to 25% recyclate from chemical recycling	12.08.2019
BIESTERFELD Distributor for Polyprocess' polyester products / New general managers in Benelux and Ukraine	05.08.2019
SOPREMA Insulation specialist recycles PET packaging into polyols / Plant opened in France	30.07.2019
ASAHI KASEI PA-based and PPE foams for car applications / Possibilities for lightweighting and noise reduction	29.07.2019
BASF New light stabilisers extend agricultural film life	26.07.2019
AMPACET Blue masterbatch for post-consumer recycled plastics	25.07.2019
HUNTSMAN Urethane-based 3D printing materials for footwear	18.07.2019
POLYONE Infrared sortable black masterbatches for packaging	16.07.2019
DOMO CHEMICALS Polyamide 6 film manufacturing division renamed Domo Film Solutions / Development of PA films with recycled content	15.07.2019
DUPONT / EXXONMOBIL CHEMICAL Thermoplastic vulcanisates for corner automotive seals	15.07.2019
RIVERDALE New additive raises impact resistance of recycled polyolefins	10.07.2019
PERSTORP Launch of renewable version of “Pevalen” non-phthalate plasticiser / Up to 40% renewable content initially	10.07.2019
ENGEL Austrian machinery maker furthers Industry 4.0 development	09.07.2019
SAICA Launch of pouch with recycled LDPE content for non-food applications	08.07.2019
POLYPLASTICS Launch of POM grades for automotive fuel systems	08.07.2019

Seite 41 von 121

Topic search

Plastics Information Europe

Polymer Prices (6.058)
- Petrochemicals (491)
- Standard Thermoplastics (963)
- PET (249)
- Engineering Thermoplastics (256)
- Recyclate (370)
  - General (3)
  - Standard Thermoplastics / Recyclate (183)
  - Engineering Thermoplastics / Recyclate (184)
- Polyurethanes (247)
- High Performance Polymers (2)
- Composites (183)
- Announcements (2.575)
- World Regions (584)
  - China (293)
    - Standard Thermoplastics (148)
    - Engineering Thermoplastics (145)
  - North America (167)
  - Russia (124)
- Spot Prices (125)
- Forecasts (13)
Companies (34.547)
- Polymer Materials (17.067)
  - Petrochemicals (3.079)
  - Charge (1.849)
    - General (89)
    - Masterbatches (339)
    - Additives (774)
    - Colours (379)
    - Reinforcements/Fillers (268)
  - Polymers (10.973)
    - General (713)
    - Standard Thermoplastics (3.803)
      - General (113)
      - Polyolefins (1.936)
      - Polystyrenes (335)
      - PVC (664)
      - Polyester (558)
      - Expandable (PS, PP, PE) (197)
    - Technical Thermoplastics (3.234)
      - General (349)
      - Styrene Copolymers (259)
      - PC/PMMA (459)
      - Polyamides (896)
      - POM/PBT/PP (315)
      - Technical Compounds (956)
    - PUR (782)
    - Other (2.441)
      - General (101)
      - Composites/Thermosets (408)
      - High Performance (609)
      - Biopolymers (697)
      - Elastomers/TPE (368)
      - Recyclate (258)
  - Distribution (1.166)
- Machinery (1.087)
  - General (28)
  - Plant Construction (139)
  - Core Machines (741)
    - General (89)
    - Extrusion (180)
    - Injection Moulding (369)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.115)
  - General (893)
  - Extrusion (2.337)
    - General (120)
    - Flexible Films (1.128)
    - Rigid Films/Sheet (380)
    - Pipes (349)
    - Profiles/Rods (257)
    - Other (103)
  - Injection Moulding (1.710)
  - Blow Moulding (511)
  - PUR (305)
  - Other (1.121)
    - General (120)
    - Foam (305)
    - Composites/Thermosets (350)
    - Thermoforming (217)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (238)
- Application (7.301)
  - General (128)
  - Packaging (3.153)
  - Construction (723)
  - Automotive / Transport (1.673)
  - Electrical Appliances (335)
  - Consumer Goods (679)
  - Medical (397)
  - Technical (213)
- Other (1.977)
  - Recycling/Disposal (1.590)
  - Services (253)
  - Logistics (134)
Commercial Register (125)
- Insolvency (120)
- Changes (5)
Markets (23.308)
- Polymer Materials (10.076)
  - Petrochemicals (2.474)
  - Charge (855)
    - General (38)
    - Masterbatches (94)
    - Additives (338)
    - Colours (156)
    - Reinforcements/Fillers (229)
  - Polymers (6.364)
    - General (788)
    - Standard Thermoplastics (2.435)
      - General (74)
      - Polyolefins (1.213)
      - Polystyrenes (157)
      - PVC (504)
      - Polyester (346)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.277)
      - General (87)
      - Styrene Copolymers (105)
      - PC/PMMA (151)
      - Polyamides (439)
      - POM/PBT/PP (110)
      - Technical Compounds (385)
    - PUR (454)
    - Other (1.410)
      - General (47)
      - Composites/Thermosets (293)
      - High Performance (302)
      - Biopolymers (431)
      - Elastomers/TPE (141)
      - Recyclate (196)
  - Other Materials (59)
  - Distribution (324)
- Machinery (508)
  - General (129)
  - Plant Construction (14)
  - Core Machines (294)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (125)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.696)
  - General (432)
  - Extrusion (610)
    - General (20)
    - Flexible Films (297)
    - Rigid Films/Sheets (121)
    - Pipes (72)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (178)
  - Blow Moulding (43)
  - PUR (81)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.093)
  - General (42)
  - Packaging (1.979)
  - Construction (314)
  - Automotive / Transport (969)
  - Electrical Appliances (219)
  - Consumer Goods (254)
  - Medical (205)
  - Technical (60)
  - Other (51)
- Regions and Countries (4.096)
  - World (195)
  - German-speaking Countries (484)
  - Europe (1.987)
    - General (481)
    - Italy (142)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (507)
    - Low Countries (74)
    - Central Europe (177)
    - Scandinavia (46)
    - Russia (111)
    - Eastern Europe (53)
    - Southeastern Europe (141)
  - North America (489)
  - Asia (678)
    - General (122)
    - China (392)
    - Japan (51)
    - Korea (26)
    - India (87)
  - Middle East (143)
  - Other (39)
  - South America (81)
- Other (2.839)
  - Recycling/Disposal (2.064)
  - Economic Trend (428)
  - Services (41)
  - Logistics (235)
  - Energy (71)
Production and Engineering (3.771)
- Polymer Materials (2.351)
  - Petrochemicals (60)
  - Charge (439)
    - General (14)
    - Masterbatches (111)
    - Additives (226)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.821)
    - General (30)
    - Standard Themoplastics (362)
    - Technical Thermoplastics (601)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (206)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (756)
      - General (21)
      - Composites/Thermosets (107)
      - High Performance (160)
      - Biopolymers (245)
      - Elastomers/TPE (114)
      - Recyclate (109)
  - Other (31)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (431)
  - Polymer Materials (144)
  - Technical (13)
  - Product Development (41)
  - Process (82)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (57)
- New Products (856)
  - Packaging (565)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (38)
- Other (39)
Management (715)
- Purchasing (103)
- General Management (160)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (290)
People (1.497)
Industry (6.134)
- General (1.207)
- Associations/Institutions (2.346)
- Legislation (1.321)
- Environment / Health (1.250)
- plas.TV - Plastics unite(d) (10)
Events (1.146)
Plastic Fantastic (548)
Commentaries (82)
Interviews (142)
Notes by Publisher (72)