Show topic list

Production and Engineering

3D PRINTING RESEARCH Vision to revolutionise 3D printing filament in terms of material and quality / Recycled plastics to be used for the filament	29.01.2020
BERRY GLOBAL Introduction of detectable black masterbatch	29.01.2020
CCL INDUSTRIES Floating labels aim to improve PET recycling rate	24.01.2020
ALBIS Compounds developed for fuel cell applications	09.01.2020
POLYPLASTICS Development of blister-resistant liquid crystal polymer grades	07.01.2020
BASF Next-generation "Basotect UF+" insulating foam grade available	06.01.2020
CHEMICAL RECYCLING Cross-industry consortium to advance technology targeting hard-to-recycle PET waste / Alpla, Britvic, BP, Danone, Remondis and Unilever	02.01.2020
STORA ENSO Pilot plant for PEF precursor in Belgium / Renewable packaging materials	20.12.2019
STOROPACK New recycled polystyrene raw material for protective packaging production	18.12.2019
BASF Bio-based colour masterbatch launched for rPE	12.12.2019
COVERIS New shrink film in “Duralite” range is recyclable and contains recyclate	11.12.2019
BEWISYNBRA Recyclable EPS introduced following successful trials / Commercial deliveries to begin early 2020	06.12.2019
JSP EPP particle foam with recycled content / Same mechanical properties as virgin material	05.12.2019
ESSEL PROPACK Launch of two recyclable HDPE tubes / APR certified	02.12.2019
TETRA PAK / BRASKEM Partnership on bio-based polymers for carton packaging	28.11.2019
MARKET RESEARCH BT2i and Nova-Institute offer advice for green plastic solutions	28.11.2019
SPAIN Plastics companies seek to improve recycling of multilayer food packaging to obtain high-quality recycled PA / Aimplas project	25.11.2019
INEOS New polymer range contains up to 50% post-consumer recyclate / Cologne site certified to produce bio-attributed olefins and polyolefins	25.11.2019
SEKISUI ALVEO New "Alveobloc" block foam targets automotive applications requiring low emissions	21.11.2019
EVONIK Expansion of 3D printing engagement / Partnership with NXT Factory	19.11.2019
EPSAN Launch of PA compounds for public transport applications	19.11.2019
CABOT “Athlos” carbon nanostructures for engineering plastics	15.11.2019
POLYONE Launch of TPEs with bio-renewable content / Suitable for overmoulding rigid PP and ABS	14.11.2019
CLARIANT New barrier for PET packaged food and beverages	06.11.2019
WOODLY Films and flexible packaging made of wood cellulose / Prototypes in cooperation with Amerplast and Wipak	04.11.2019

Seite 39 von 121

Topic search

Plastics Information Europe

Polymer Prices (6.058)
- Petrochemicals (491)
- Standard Thermoplastics (963)
- PET (249)
- Engineering Thermoplastics (256)
- Recyclate (370)
  - General (3)
  - Standard Thermoplastics / Recyclate (183)
  - Engineering Thermoplastics / Recyclate (184)
- Polyurethanes (247)
- High Performance Polymers (2)
- Composites (183)
- Announcements (2.575)
- World Regions (584)
  - China (293)
    - Standard Thermoplastics (148)
    - Engineering Thermoplastics (145)
  - North America (167)
  - Russia (124)
- Spot Prices (125)
- Forecasts (13)
Companies (34.547)
- Polymer Materials (17.067)
  - Petrochemicals (3.079)
  - Charge (1.849)
    - General (89)
    - Masterbatches (339)
    - Additives (774)
    - Colours (379)
    - Reinforcements/Fillers (268)
  - Polymers (10.973)
    - General (713)
    - Standard Thermoplastics (3.803)
      - General (113)
      - Polyolefins (1.936)
      - Polystyrenes (335)
      - PVC (664)
      - Polyester (558)
      - Expandable (PS, PP, PE) (197)
    - Technical Thermoplastics (3.234)
      - General (349)
      - Styrene Copolymers (259)
      - PC/PMMA (459)
      - Polyamides (896)
      - POM/PBT/PP (315)
      - Technical Compounds (956)
    - PUR (782)
    - Other (2.441)
      - General (101)
      - Composites/Thermosets (408)
      - High Performance (609)
      - Biopolymers (697)
      - Elastomers/TPE (368)
      - Recyclate (258)
  - Distribution (1.166)
- Machinery (1.087)
  - General (28)
  - Plant Construction (139)
  - Core Machines (741)
    - General (89)
    - Extrusion (180)
    - Injection Moulding (369)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.115)
  - General (893)
  - Extrusion (2.337)
    - General (120)
    - Flexible Films (1.128)
    - Rigid Films/Sheet (380)
    - Pipes (349)
    - Profiles/Rods (257)
    - Other (103)
  - Injection Moulding (1.710)
  - Blow Moulding (511)
  - PUR (305)
  - Other (1.121)
    - General (120)
    - Foam (305)
    - Composites/Thermosets (350)
    - Thermoforming (217)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (238)
- Application (7.301)
  - General (128)
  - Packaging (3.153)
  - Construction (723)
  - Automotive / Transport (1.673)
  - Electrical Appliances (335)
  - Consumer Goods (679)
  - Medical (397)
  - Technical (213)
- Other (1.977)
  - Recycling/Disposal (1.590)
  - Services (253)
  - Logistics (134)
Commercial Register (125)
- Insolvency (120)
- Changes (5)
Markets (23.308)
- Polymer Materials (10.076)
  - Petrochemicals (2.474)
  - Charge (855)
    - General (38)
    - Masterbatches (94)
    - Additives (338)
    - Colours (156)
    - Reinforcements/Fillers (229)
  - Polymers (6.364)
    - General (788)
    - Standard Thermoplastics (2.435)
      - General (74)
      - Polyolefins (1.213)
      - Polystyrenes (157)
      - PVC (504)
      - Polyester (346)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.277)
      - General (87)
      - Styrene Copolymers (105)
      - PC/PMMA (151)
      - Polyamides (439)
      - POM/PBT/PP (110)
      - Technical Compounds (385)
    - PUR (454)
    - Other (1.410)
      - General (47)
      - Composites/Thermosets (293)
      - High Performance (302)
      - Biopolymers (431)
      - Elastomers/TPE (141)
      - Recyclate (196)
  - Other Materials (59)
  - Distribution (324)
- Machinery (508)
  - General (129)
  - Plant Construction (14)
  - Core Machines (294)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (125)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.696)
  - General (432)
  - Extrusion (610)
    - General (20)
    - Flexible Films (297)
    - Rigid Films/Sheets (121)
    - Pipes (72)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (178)
  - Blow Moulding (43)
  - PUR (81)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.093)
  - General (42)
  - Packaging (1.979)
  - Construction (314)
  - Automotive / Transport (969)
  - Electrical Appliances (219)
  - Consumer Goods (254)
  - Medical (205)
  - Technical (60)
  - Other (51)
- Regions and Countries (4.096)
  - World (195)
  - German-speaking Countries (484)
  - Europe (1.987)
    - General (481)
    - Italy (142)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (507)
    - Low Countries (74)
    - Central Europe (177)
    - Scandinavia (46)
    - Russia (111)
    - Eastern Europe (53)
    - Southeastern Europe (141)
  - North America (489)
  - Asia (678)
    - General (122)
    - China (392)
    - Japan (51)
    - Korea (26)
    - India (87)
  - Middle East (143)
  - Other (39)
  - South America (81)
- Other (2.839)
  - Recycling/Disposal (2.064)
  - Economic Trend (428)
  - Services (41)
  - Logistics (235)
  - Energy (71)
Production and Engineering (3.771)
- Polymer Materials (2.351)
  - Petrochemicals (60)
  - Charge (439)
    - General (14)
    - Masterbatches (111)
    - Additives (226)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.821)
    - General (30)
    - Standard Themoplastics (362)
    - Technical Thermoplastics (601)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (206)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (756)
      - General (21)
      - Composites/Thermosets (107)
      - High Performance (160)
      - Biopolymers (245)
      - Elastomers/TPE (114)
      - Recyclate (109)
  - Other (31)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (431)
  - Polymer Materials (144)
  - Technical (13)
  - Product Development (41)
  - Process (82)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (57)
- New Products (856)
  - Packaging (565)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (38)
- Other (39)
Management (715)
- Purchasing (103)
- General Management (160)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (290)
People (1.497)
Industry (6.134)
- General (1.207)
- Associations/Institutions (2.346)
- Legislation (1.321)
- Environment / Health (1.250)
- plas.TV - Plastics unite(d) (10)
Events (1.146)
Plastic Fantastic (548)
Commentaries (82)
Interviews (142)
Notes by Publisher (72)