Show topic list

Markets Polymer Materials Polymers

POLIMERI EUROPA Entire petrochemicals complex in Sardinia to go offline for two months / Cracker, HDPE, chlorine chain and aromatics affected / Phenol chain down for all of 2009	01.12.2008
SOLUTIA Restructuring of PA 6.6 business stepped up to aid sale plans / Capacity and job cuts / Decline in demand	01.12.2008
CHINA Anti-dumping investigation into polyamide imports from the EU, USA and Taiwan	01.12.2008
ROMPETROL Polyethylene production reduced by 55% for two months / Nearly a quarter of the workforce to be temporarily laid off	28.11.2008
EVONIK PMI rigid foam plant comes on stream in US	28.11.2008
EUROPEAN CHEMICAL INDUSTRY Cefic forecasts decline in output of 0.6% in 2008	28.11.2008
CHINA Rise of 27% rise in value of plastics production in 2007 / Pipes and profiles segments on the brink of consolidation / More stringent safety regulations for the chemical industry	21.11.2008
LA SEDA Financing obtained for Portuguese PTA plant / Interquisa acquisition finally falls through	21.11.2008
PETROCHEMICAL MARKETS Bayer MaterialScience: Force majeure for PU components in North America lifted	19.11.2008
BOREALIS “Lupotech T” specified for 350,000 t/y LDPE plant	19.11.2008
PETROCHEMICAL MARKETS CMAI sees flood of polyolefins on its way from the Middle East / Successful conference in Düsseldorf	18.11.2008
OLTCHIM Scaling back production to 40% of capacity / Sourcing of C2 and C3 from Arpechim halted / Job cuts	18.11.2008
BAYER MATERIALSCIENCE PU systems house opens in Guangzhou	18.11.2008
LUCITE INTERNATIONAL Mitsubishi acquires UK producer for USD 1.6 bn	17.11.2008
APPC 455,000 t/y PP plant commissioned in Jubail	14.11.2008
PETROCHEMICAL MARKETS Dow: Force majeure ended at Freeport, Texas	14.11.2008
SABIC New PP line comes on stream at Ibn Zahr / World's largest single “Unipol” facility	13.11.2008
ROSNEFT Petrochemicals complex to be built near Vladivostok	12.11.2008
INDIA PETROCHEMICALS GAIL / IOCL collaborate on new cracker complex	11.11.2008
INEOS VINYLS Sartor gains minority stake in Italian PVC subsidiary / "Continuity of the site is guaranteed" / No agreement on chlorine modernisation	10.11.2008
COMMODITIES TRADING Plastics futures market opens in US	07.11.2008
SABIC INNOVATIVE PLASTICS Production of engineering thermoplastics reduced by 20%	06.11.2008
AUTOMOTIVE INDUSTRY Financial crisis exacerbates car makers' slump / Suppliers adopting a wait-and-see attitude / Impact could be most severe for SMEs / First victims are being identified / Eastern Europe unlikely to be OEMs' white knight	31.10.2008
BAYER Poor performance at BMS depresses group results in Q 3 2008 / Full-year guidance unchanged / Auto crisis begins to be felt	31.10.2008
PETROCHEMICAL MARKETS Europe leads in MDI production and consumption	30.10.2008

Seite 221 von 253

Topic search

Plastics Information Europe

Polymer Prices (6.431)
- Petrochemicals (591)
- Standard Thermoplastics (1.035)
- PET (261)
- Engineering Thermoplastics (269)
- Recyclate (401)
  - General (6)
  - Standard Thermoplastics / Recyclate (197)
  - Engineering Thermoplastics / Recyclate (198)
- Polyurethanes (262)
- High Performance Polymers (2)
- Composites (195)
- Announcements (2.628)
- World Regions (623)
  - China (318)
    - Standard Thermoplastics (160)
    - Engineering Thermoplastics (158)
  - North America (181)
  - Russia (124)
- Spot Prices (138)
- Forecasts (26)
Companies (36.668)
- Polymer Materials (18.049)
  - Petrochemicals (3.279)
  - Charge (1.938)
    - General (100)
    - Masterbatches (344)
    - Additives (818)
    - Colours (400)
    - Reinforcements/Fillers (276)
  - Polymers (11.620)
    - General (751)
    - Standard Thermoplastics (4.037)
      - General (114)
      - Polyolefins (2.053)
      - Polystyrenes (363)
      - PVC (712)
      - Polyester (585)
      - Expandable (PS, PP, PE) (210)
    - Technical Thermoplastics (3.412)
      - General (353)
      - Styrene Copolymers (280)
      - PC/PMMA (485)
      - Polyamides (969)
      - POM/PBT/PP (334)
      - Technical Compounds (991)
    - PUR (822)
    - Other (2.598)
      - General (105)
      - Composites/Thermosets (417)
      - High Performance (653)
      - Biopolymers (719)
      - Elastomers/TPE (385)
      - Recyclate (319)
  - Distribution (1.212)
- Machinery (1.134)
  - General (32)
  - Plant Construction (146)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (186)
    - General (35)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (100)
    - Components (13)
  - Finishing (6)
- Processing (7.511)
  - General (941)
  - Extrusion (2.440)
    - General (131)
    - Flexible Films (1.183)
    - Rigid Films/Sheet (394)
    - Pipes (360)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.827)
  - Blow Moulding (543)
  - PUR (338)
  - Other (1.172)
    - General (133)
    - Foam (317)
    - Composites/Thermosets (361)
    - Thermoforming (231)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (250)
- Application (7.719)
  - General (141)
  - Packaging (3.333)
  - Construction (759)
  - Automotive / Transport (1.776)
  - Electrical Appliances (355)
  - Consumer Goods (711)
  - Medical (418)
  - Technical (226)
- Other (2.255)
  - Recycling/Disposal (1.802)
  - Services (263)
  - Logistics (190)
Commercial Register (169)
- Insolvency (163)
- Changes (6)
Markets (25.090)
- Polymer Materials (10.811)
  - Petrochemicals (2.665)
  - Charge (892)
    - General (41)
    - Masterbatches (100)
    - Additives (350)
    - Colours (165)
    - Reinforcements/Fillers (236)
  - Polymers (6.843)
    - General (894)
    - Standard Thermoplastics (2.579)
      - General (75)
      - Polyolefins (1.288)
      - Polystyrenes (170)
      - PVC (534)
      - Polyester (369)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.373)
      - General (90)
      - Styrene Copolymers (121)
      - PC/PMMA (165)
      - Polyamides (479)
      - POM/PBT/PP (116)
      - Technical Compounds (402)
    - PUR (482)
    - Other (1.515)
      - General (47)
      - Composites/Thermosets (304)
      - High Performance (316)
      - Biopolymers (445)
      - Elastomers/TPE (150)
      - Recyclate (253)
  - Other Materials (61)
  - Distribution (350)
- Machinery (531)
  - General (134)
  - Plant Construction (15)
  - Core Machines (309)
    - General (119)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (73)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (35)
- Processing (1.776)
  - General (481)
  - Extrusion (630)
    - General (20)
    - Flexible Films (306)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.430)
  - General (53)
  - Packaging (2.151)
  - Construction (348)
  - Automotive / Transport (1.032)
  - Electrical Appliances (231)
  - Consumer Goods (278)
  - Medical (215)
  - Technical (64)
  - Other (58)
- Regions and Countries (4.241)
  - World (197)
  - German-speaking Countries (504)
  - Europe (2.082)
    - General (513)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (530)
    - Low Countries (75)
    - Central Europe (183)
    - Scandinavia (48)
    - Russia (118)
    - Eastern Europe (61)
    - Southeastern Europe (143)
  - North America (501)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (151)
  - Other (40)
  - South America (83)
- Other (3.301)
  - Recycling/Disposal (2.330)
  - Economic Trend (552)
  - Services (41)
  - Logistics (291)
  - Energy (87)
Production and Engineering (3.854)
- Polymer Materials (2.402)
  - Petrochemicals (66)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.860)
    - General (32)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (75)
    - Other (778)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (872)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (101)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (834)
- Purchasing (110)
- General Management (205)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (349)
People (1.516)
Industry (6.748)
- General (1.305)
- Associations/Institutions (2.563)
- Legislation (1.514)
- Environment / Health (1.356)
- plas.TV - Plastics unite(d) (10)
Events (1.192)
Plastic Fantastic (585)
Commentaries (87)
Interviews (167)
Notes by Publisher (83)