Show topic list

Markets Polymer Materials Polymers

SHIN-ETSU PVC plant at Kashima resumes full output after quake / Mitsubishi restarts cracker	09.06.2011
SO.F.TER. Acquisition of engineering plastics manufacturer PGroup / Rise in reinforced plastics activities	09.06.2011
LUKOIL Ukraine PVC lines officially start up	07.06.2011
REPSOL Plans to raise EVA capacity in Spain / Focus on higher VA content grades	07.06.2011
PVC TRADE Brazilian processors concerned about S-PVC import barriers	07.06.2011
TORAY Plans to raise PPS compounding capacity / Targeting the Japanese and Chinese markets	06.06.2011
SABIC Joint Venture with MRC to build and operate methacrylates facility in Saudi Arabia / MMA plant will be world's largest / Focus on downstream activities	01.06.2011
POLYETHYLENE The most widespread polymer continues to make inroads / Global consumption reaches 72m t/y / Production capacities stand at over 90m t/y / Output predicted to rise by almost a third in five years / LDPE remains short despite PE flood	01.06.2011
ENI Polimeri Europa subsidiary creates bioplastics joint venture with Novamont / New EUR 500m hub to be built in ailing Porto Torres / A new global plastics player in the making?	31.05.2011
PETROCHEMICAL MARKETS Vestolit lifts PVC, VCM force majeure	31.05.2011
BASF New fully integrated 300,000 t/y European TDI plant to start up in 2014 / Largest single-train unit	30.05.2011
HUNTSMAN Technology licensed for PO project in China / Worldscale plant to start up in 2013	30.05.2011
PETROCHEMICAL MARKETS Arkema restarts Lavera VCM line / FM will be lifted next week	27.05.2011
PET BEER BOTTLES Global PET beer bottle market expected to grow at 5.3% until 2015 / New and improved barrier technologies / Eastern Europe is the largest market / New Pira International study	27.05.2011
BIOPLASTICS Global production capacity to double by 2015 / Bio-based commodity plastics to overtake biodegradable materials / Study by European Bioplastics	26.05.2011
RECYCLATE PRICES Pekutherm: Plastic scrap prices reach highest peak since 1985	25.05.2011
MITSUBISHI CHEMICAL Raising PVC compound capacity in Thailand / Expansion to meet rising regional demand	25.05.2011
MERQUINSA Representative office established in China	23.05.2011
SABIC New polycarbonate line to go up in Tianjin by 2015 / Beachhead for Indian subcontinent	23.05.2011
DUPONT New 20,000 t/y plant for PPA set to start up in Singapore in 2013 / More investment in China	20.05.2011
DUPONT Capacity increase for ethylene copolymers in The Netherlands	19.05.2011
IMCD Distribution agreement with Rodenburg Biopolymers	19.05.2011
GERMAN PLASTICS PRODUCERS Production volume and value back at pre-crisis level in 2010 / Margin stabilisation is the target / Strong demand from China	18.05.2011
MOSSI & GHISOLFI PET complex planned in USA / Single line with 1m t/y capacity	17.05.2011
TICONA “Celstran” long fibre reinforced thermoplastics capacity in Nanjing to double / Solidifying its presence in China	11.05.2011

Seite 180 von 239

Topic search

Plastics Information Europe

Polymer Prices (6.113)
- Petrochemicals (507)
- Standard Thermoplastics (976)
- PET (251)
- Engineering Thermoplastics (258)
- Recyclate (374)
  - General (3)
  - Standard Thermoplastics / Recyclate (185)
  - Engineering Thermoplastics / Recyclate (186)
- Polyurethanes (249)
- High Performance Polymers (2)
- Composites (185)
- Announcements (2.579)
- World Regions (590)
  - China (296)
    - Standard Thermoplastics (149)
    - Engineering Thermoplastics (147)
  - North America (170)
  - Russia (124)
- Spot Prices (127)
- Forecasts (15)
Companies (34.943)
- Polymer Materials (17.231)
  - Petrochemicals (3.111)
  - Charge (1.863)
    - General (89)
    - Masterbatches (340)
    - Additives (781)
    - Colours (383)
    - Reinforcements/Fillers (270)
  - Polymers (11.084)
    - General (717)
    - Standard Thermoplastics (3.843)
      - General (113)
      - Polyolefins (1.951)
      - Polystyrenes (342)
      - PVC (672)
      - Polyester (565)
      - Expandable (PS, PP, PE) (200)
    - Technical Thermoplastics (3.263)
      - General (349)
      - Styrene Copolymers (261)
      - PC/PMMA (464)
      - Polyamides (906)
      - POM/PBT/PP (319)
      - Technical Compounds (964)
    - PUR (791)
    - Other (2.470)
      - General (101)
      - Composites/Thermosets (411)
      - High Performance (616)
      - Biopolymers (701)
      - Elastomers/TPE (370)
      - Recyclate (271)
  - Distribution (1.173)
- Machinery (1.090)
  - General (28)
  - Plant Construction (139)
  - Core Machines (744)
    - General (90)
    - Extrusion (181)
    - Injection Moulding (370)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.200)
  - General (899)
  - Extrusion (2.361)
    - General (123)
    - Flexible Films (1.140)
    - Rigid Films/Sheet (384)
    - Pipes (350)
    - Profiles/Rods (259)
    - Other (105)
  - Injection Moulding (1.738)
  - Blow Moulding (519)
  - PUR (314)
  - Other (1.129)
    - General (121)
    - Foam (306)
    - Composites/Thermosets (353)
    - Thermoforming (220)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (240)
- Application (7.398)
  - General (130)
  - Packaging (3.194)
  - Construction (733)
  - Automotive / Transport (1.695)
  - Electrical Appliances (339)
  - Consumer Goods (687)
  - Medical (404)
  - Technical (216)
- Other (2.024)
  - Recycling/Disposal (1.626)
  - Services (255)
  - Logistics (143)
Commercial Register (134)
- Insolvency (129)
- Changes (5)
Markets (23.623)
- Polymer Materials (10.198)
  - Petrochemicals (2.502)
  - Charge (865)
    - General (38)
    - Masterbatches (95)
    - Additives (342)
    - Colours (159)
    - Reinforcements/Fillers (231)
  - Polymers (6.442)
    - General (812)
    - Standard Thermoplastics (2.453)
      - General (74)
      - Polyolefins (1.224)
      - Polystyrenes (158)
      - PVC (505)
      - Polyester (351)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.289)
      - General (87)
      - Styrene Copolymers (108)
      - PC/PMMA (155)
      - Polyamides (442)
      - POM/PBT/PP (110)
      - Technical Compounds (387)
    - PUR (462)
    - Other (1.426)
      - General (47)
      - Composites/Thermosets (296)
      - High Performance (303)
      - Biopolymers (433)
      - Elastomers/TPE (141)
      - Recyclate (206)
  - Other Materials (59)
  - Distribution (330)
- Machinery (509)
  - General (130)
  - Plant Construction (14)
  - Core Machines (294)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (125)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.717)
  - General (441)
  - Extrusion (621)
    - General (20)
    - Flexible Films (301)
    - Rigid Films/Sheets (125)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (179)
  - Blow Moulding (43)
  - PUR (81)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.153)
  - General (45)
  - Packaging (2.010)
  - Construction (320)
  - Automotive / Transport (978)
  - Electrical Appliances (221)
  - Consumer Goods (258)
  - Medical (209)
  - Technical (60)
  - Other (52)
- Regions and Countries (4.126)
  - World (195)
  - German-speaking Countries (488)
  - Europe (2.005)
    - General (488)
    - Italy (144)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (512)
    - Low Countries (74)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (111)
    - Eastern Europe (54)
    - Southeastern Europe (142)
  - North America (494)
  - Asia (680)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (27)
    - India (87)
  - Middle East (143)
  - Other (40)
  - South America (81)
- Other (2.920)
  - Recycling/Disposal (2.114)
  - Economic Trend (450)
  - Services (41)
  - Logistics (243)
  - Energy (72)
Production and Engineering (3.788)
- Polymer Materials (2.360)
  - Petrochemicals (60)
  - Charge (441)
    - General (14)
    - Masterbatches (112)
    - Additives (227)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.828)
    - General (30)
    - Standard Themoplastics (364)
    - Technical Thermoplastics (602)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (207)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (760)
      - General (21)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (247)
      - Elastomers/TPE (114)
      - Recyclate (110)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (435)
  - Polymer Materials (144)
  - Technical (15)
  - Product Development (41)
  - Process (82)
  - Application (91)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (859)
  - Packaging (567)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (8)
  - Other (38)
- Other (39)
Management (731)
- Purchasing (104)
- General Management (167)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (298)
People (1.500)
Industry (6.255)
- General (1.226)
- Associations/Institutions (2.384)
- Legislation (1.359)
- Environment / Health (1.276)
- plas.TV - Plastics unite(d) (10)
Events (1.152)
Plastic Fantastic (555)
Commentaries (83)
Interviews (144)
Notes by Publisher (72)