Show topic list

Markets Polymer Materials Polymers

CHEMICAL INDUSTRY GERMANY Sales down in third quarter / Sentiment among VCI members ‘drastically poor'	21.11.2024
DEEPAK NITRITE Indian group to rebuild polycarbonate plant locally after acquiring tech from Trinseo	21.11.2024
WASTE EXPORTS UK shipments to Turkey on the rise again / 60% increase between 2022 and 2023 – Greenpeace	20.11.2024
AGRICULTURAL FILMS Biodegradable mulch films added to European fertiliser regulation / Major headway for farming sustainability – EUBP	20.11.2024
TOPAS ADVANCED POLYMERS Delays in construction of COC plant in Germany / Production to start much later	20.11.2024
FORTUM CCU yields ‘breakthrough' PHA / Same properties as virgin plastics claimed	20.11.2024
PVC UK government proposes tariffs on US-made S-PVC / British shops voice fears over impact	19.11.2024
DOW Partnership with Ambipar to boost PE recycling in Brazil / Focus on transforming post-consumer waste into new products	18.11.2024
PVC India's anti-dumping duties beneficial for European producers / Exports to the country could be worthwhile again	14.11.2024
EUROPEAN POLITICS EU commissioner candidates confirmed / Climate discussion front and centre / Von der Leyen plans to ‘engage' with Trump	14.11.2024
INDORAMA VENTURES Q3 profits soar on cost cuts, restructuring despite lacklustre growth / Main segment PET revenues fall	13.11.2024
EUROZONE ECONOMY German investor mood sours after Trump victory / Ifo reports more signs of economic problems / Order shortage in plastics sector	13.11.2024
PETROCHEMICAL MARKETS Polyethylene: Borealis declares force majeure for production in Finland	12.11.2024
COVESTRO Management, supervisory board recommend sale of shares to Adnoc / Arab company pledges to preserve Covestro	12.11.2024
CHIMCOMPLEX Plans for carbon-based polyols / UK Econic as licensor	12.11.2024
PAQUES BIOMATERIALS MoU with paperboard producer to build full-scale PHA biomass plant / Start-up slated for 2027	11.11.2024
SABIC Plastics group lifts force majeure for PP homopolymers from Germany	07.11.2024
HEXPOL Acquisition of majority stake in US compounder Piedmont	07.11.2024
LYONDELLBASELL US business lifts spirits for the short term / Earnings down again, significantly	06.11.2024
PLASTICS AND ENVIRONMENT Report calls for ban on UK waste exports / Current system ‘causes waste colonialism' – EIA	06.11.2024
JBF RAK Emirati holding company takes over Arab parts of PET producer and processor	06.11.2024
FLEXIBLE PACKAGING European prices for most plastic materials decline / Manufacturers “cautiously optimistic” about next year's demand	04.11.2024
PEARL Polymer producer opens PU system house in Vietnam / Production in Egypt, India to follow	04.11.2024
INEOS Further production site closures in North America	01.11.2024
AOC Resin producer to be acquired by Japan's Nippon Paint	01.11.2024

Seite 1 von 226

Topic search

Plastics Information Europe

Polymer Prices (5.840)
- Petrochemicals (423)
- Standard Thermoplastics (920)
- PET (241)
- Engineering Thermoplastics (247)
- Recyclate (353)
  - Standard Thermoplastics / Recyclate (176)
  - Engineering Thermoplastics / Recyclate (177)
- Polyurethanes (239)
- High Performance Polymers (2)
- Composites (175)
- Announcements (2.556)
- World Regions (562)
  - China (278)
    - Standard Thermoplastics (140)
    - Engineering Thermoplastics (138)
  - North America (160)
  - Russia (124)
- Spot Prices (118)
- Forecasts (4)
Companies (33.206)
- Polymer Materials (16.455)
  - Petrochemicals (2.954)
  - Charge (1.798)
    - General (89)
    - Masterbatches (332)
    - Additives (749)
    - Colours (367)
    - Reinforcements/Fillers (261)
  - Polymers (10.573)
    - General (672)
    - Standard Thermoplastics (3.665)
      - General (113)
      - Polyolefins (1.857)
      - Polystyrenes (323)
      - PVC (641)
      - Polyester (544)
      - Expandable (PS, PP, PE) (187)
    - Technical Thermoplastics (3.122)
      - General (348)
      - Styrene Copolymers (250)
      - PC/PMMA (441)
      - Polyamides (858)
      - POM/PBT/PP (304)
      - Technical Compounds (921)
    - PUR (762)
    - Other (2.352)
      - General (100)
      - Composites/Thermosets (398)
      - High Performance (586)
      - Biopolymers (681)
      - Elastomers/TPE (356)
      - Recyclate (231)
  - Distribution (1.130)
- Machinery (1.063)
  - General (27)
  - Plant Construction (129)
  - Core Machines (730)
    - General (88)
    - Extrusion (176)
    - Injection Moulding (363)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (173)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.854)
  - General (857)
  - Extrusion (2.261)
    - General (112)
    - Flexible Films (1.089)
    - Rigid Films/Sheet (368)
    - Pipes (340)
    - Profiles/Rods (255)
    - Other (97)
  - Injection Moulding (1.642)
  - Blow Moulding (491)
  - PUR (285)
  - Other (1.085)
    - General (114)
    - Foam (302)
    - Composites/Thermosets (335)
    - Thermoforming (209)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (233)
- Application (7.025)
  - General (125)
  - Packaging (3.033)
  - Construction (697)
  - Automotive / Transport (1.609)
  - Electrical Appliances (326)
  - Consumer Goods (653)
  - Medical (378)
  - Technical (204)
- Other (1.809)
  - Recycling/Disposal (1.462)
  - Services (248)
  - Logistics (99)
Commercial Register (110)
- Insolvency (105)
- Changes (5)
Markets (22.206)
- Polymer Materials (9.632)
  - Petrochemicals (2.340)
  - Charge (834)
    - General (38)
    - Masterbatches (90)
    - Additives (331)
    - Colours (153)
    - Reinforcements/Fillers (222)
  - Polymers (6.094)
    - General (718)
    - Standard Thermoplastics (2.342)
      - General (74)
      - Polyolefins (1.157)
      - Polystyrenes (154)
      - PVC (485)
      - Polyester (337)
      - Expandable (PS, PP, PE) (135)
    - Technical Thermoplastics (1.234)
      - General (87)
      - Styrene Copolymers (101)
      - PC/PMMA (145)
      - Polyamides (420)
      - POM/PBT/PP (106)
      - Technical Compounds (375)
    - PUR (442)
    - Other (1.358)
      - General (46)
      - Composites/Thermosets (287)
      - High Performance (293)
      - Biopolymers (420)
      - Elastomers/TPE (137)
      - Recyclate (175)
  - Other Materials (57)
  - Distribution (307)
- Machinery (501)
  - General (127)
  - Plant Construction (14)
  - Core Machines (289)
    - General (109)
    - Extrusion (36)
    - Injection Moulding (123)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.638)
  - General (403)
  - Extrusion (596)
    - General (20)
    - Flexible Films (290)
    - Rigid Films/Sheets (116)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (176)
  - Blow Moulding (43)
  - PUR (77)
  - Other (299)
    - General (20)
    - Foam (77)
    - Composites/Thermosets (136)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.889)
  - General (37)
  - Packaging (1.872)
  - Construction (297)
  - Automotive / Transport (928)
  - Electrical Appliances (212)
  - Consumer Goods (243)
  - Medical (198)
  - Technical (56)
  - Other (46)
- Regions and Countries (4.015)
  - World (194)
  - German-speaking Countries (472)
  - Europe (1.943)
    - General (463)
    - Italy (142)
    - France (155)
    - Spain/Portugal (97)
    - Great Britain/Ireland (502)
    - Low Countries (74)
    - Central Europe (173)
    - Scandinavia (44)
    - Russia (107)
    - Eastern Europe (46)
    - Southeastern Europe (140)
  - North America (480)
  - Asia (667)
    - General (118)
    - China (389)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (141)
  - Other (37)
  - South America (81)
- Other (2.531)
  - Recycling/Disposal (1.896)
  - Economic Trend (340)
  - Services (41)
  - Logistics (200)
  - Energy (54)
Production and Engineering (3.687)
- Polymer Materials (2.302)
  - Petrochemicals (55)
  - Charge (434)
    - General (13)
    - Masterbatches (111)
    - Additives (222)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.783)
    - General (29)
    - Standard Themoplastics (356)
    - Technical Thermoplastics (590)
      - General (19)
      - Styrene Copolymers (61)
      - PC/PMMA (62)
      - Polyamides (202)
      - POM/PBT/PP (66)
      - Technical Compounds (180)
    - PUR (69)
    - Other (739)
      - General (21)
      - Composites/Thermosets (106)
      - High Performance (159)
      - Biopolymers (238)
      - Elastomers/TPE (113)
      - Recyclate (102)
  - Other (30)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (420)
  - Polymer Materials (140)
  - Technical (13)
  - Product Development (40)
  - Process (81)
  - Application (89)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (53)
- New Products (833)
  - Packaging (546)
  - Construction (34)
  - Automotive / Transport (97)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (37)
- Other (38)
Management (633)
- Purchasing (100)
- General Management (136)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (88)
- Logistics (245)
People (1.473)
Industry (5.720)
- General (1.135)
- Associations/Institutions (2.202)
- Legislation (1.205)
- Environment / Health (1.168)
- plas.TV - Plastics unite(d) (10)
Events (1.120)
Plastic Fantastic (520)
Commentaries (78)
Interviews (130)
Notes by Publisher (69)