Show topic list

Markets Polymer Materials

PETROCHEMICAL MARKETS NPC: Deadly explosion rocks Iran's Bandar Imam Khomeini petrochemical complex	07.08.2012
NANOCOMP TECHNOLOGIES Carbon nanotubes facility opened in USA / Strategic alliance with DuPont	07.08.2012
PETROCHEMICAL MARKETS Equate temporarily shuts down MEG line following a fire	07.08.2012
HONEYWELL UOP licenses technology to Lukoil / New FCC complex at Nizhny Novgorod on stream in 2015	06.08.2012
PLASTICS AND ENVIRONMENT EPA identifies substitutes for decaBDE flame retardants / US phase-out from 2013	06.08.2012
PETROCHEMICAL MARKETS Styrolution declares force majeure for styrene from North America	02.08.2012
TORAY New compounding plant in Sichuan / Third facility in China / Serving local automotive and home appliances sectors	02.08.2012
AZELIS Agreement to cooperate with Japan's Marubeni in Asia / Initial focus on China	01.08.2012
HUNTSMAN PU systems house opened in Indonesia	01.08.2012
METABOLIX Antibióticos named new manufacturing partner for PHA-based bioplastics / Production located in Spain	01.08.2012
CORRECTION - ACRON GROUP Russian conglomerate acquires minority share in Poland's Azoty Tarnow	01.08.2012
SAMSUNG CHEIL Polycarbonate capacity expansion in Yeosu on stream / Consumer electronics and automotive applications	31.07.2012
TAIWAN USD 3.3 bn state grant to revamp petrochemical sector	30.07.2012
ARKEMA Changshu PVDF capacity expansion on stream	27.07.2012
WILLIAMS Plans for new propylene plant in Canada / Dehydrogenation of propane yielded from oil extraction	27.07.2012
SABIC IP Raising “Stamax” long glass-fibre PP composites output in Belgium / Meeting rising demand from the automotive sector	26.07.2012
SCOTT BADER Composites joint venture with India's Satyen Polymers	26.07.2012
BIOPLASTICS Renewable route to butadiene / Versalis, Novamont and Genomatica cooperate	26.07.2012
PETROCHEMICAL MARKETS Asian ethylene spot markets firming / Japan's Keiyo Ethylene forced to idle cracker	25.07.2012
EVONIK Wesseling plant to raise output of cross-linking additives / Meeting rising solar industry demand	25.07.2012
PETROCHEMICAL MARKETS Rhodia lifts FM for PA 6.6 in Brazil	24.07.2012
GEORGIA GULF Purchase of PPG's commodity chemicals business / Creation of North America's second largest VCM producer / Deal improves integration with low cost US gas	24.07.2012
SGL CARBON Fisipe squeeze out imminent / US subsidiary Hitco receives order for Boeing 777 control surfaces	24.07.2012
CHEMTURA New rotational casting laboratory starts up in Italy	23.07.2012
INABATA Compounding expansions planned in Vietnam and Indonesia / Investments studied in India, Mexico and Brazil	23.07.2012

Seite 254 von 354

Topic search

Plastics Information Europe

Polymer Prices (6.502)
- Petrochemicals (613)
- Standard Thermoplastics (1.049)
- PET (264)
- Engineering Thermoplastics (272)
- Recyclate (405)
  - General (6)
  - Standard Thermoplastics / Recyclate (199)
  - Engineering Thermoplastics / Recyclate (200)
- Polyurethanes (264)
- High Performance Polymers (2)
- Composites (198)
- Announcements (2.635)
- World Regions (632)
  - China (324)
    - Standard Thermoplastics (163)
    - Engineering Thermoplastics (161)
  - North America (184)
  - Russia (124)
- Spot Prices (140)
- Forecasts (28)
Companies (37.064)
- Polymer Materials (18.206)
  - Petrochemicals (3.309)
  - Charge (1.953)
    - General (100)
    - Masterbatches (346)
    - Additives (828)
    - Colours (402)
    - Reinforcements/Fillers (277)
  - Polymers (11.722)
    - General (755)
    - Standard Thermoplastics (4.070)
      - General (114)
      - Polyolefins (2.071)
      - Polystyrenes (364)
      - PVC (722)
      - Polyester (588)
      - Expandable (PS, PP, PE) (211)
    - Technical Thermoplastics (3.441)
      - General (354)
      - Styrene Copolymers (283)
      - PC/PMMA (490)
      - Polyamides (978)
      - POM/PBT/PP (338)
      - Technical Compounds (998)
    - PUR (830)
    - Other (2.626)
      - General (107)
      - Composites/Thermosets (419)
      - High Performance (659)
      - Biopolymers (724)
      - Elastomers/TPE (389)
      - Recyclate (328)
  - Distribution (1.222)
- Machinery (1.142)
  - General (33)
  - Plant Construction (147)
  - Core Machines (769)
    - General (92)
    - Extrusion (184)
    - Injection Moulding (387)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (17)
    - Compression Moulding (4)
  - Peripherals (187)
    - General (36)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (100)
    - Components (13)
  - Finishing (6)
- Processing (7.592)
  - General (947)
  - Extrusion (2.465)
    - General (131)
    - Flexible Films (1.194)
    - Rigid Films/Sheet (398)
    - Pipes (365)
    - Profiles/Rods (265)
    - Other (112)
  - Injection Moulding (1.849)
  - Blow Moulding (552)
  - PUR (341)
  - Other (1.186)
    - General (135)
    - Foam (321)
    - Composites/Thermosets (364)
    - Thermoforming (233)
    - Rotational Moulding (36)
    - Additive Manufacturing (97)
  - Finishing (252)
- Application (7.816)
  - General (144)
  - Packaging (3.372)
  - Construction (769)
  - Automotive / Transport (1.795)
  - Electrical Appliances (360)
  - Consumer Goods (720)
  - Medical (423)
  - Technical (233)
- Other (2.308)
  - Recycling/Disposal (1.842)
  - Services (265)
  - Logistics (201)
Commercial Register (176)
- Insolvency (170)
- Changes (6)
Markets (25.335)
- Polymer Materials (10.912)
  - Petrochemicals (2.691)
  - Charge (897)
    - General (41)
    - Masterbatches (100)
    - Additives (353)
    - Colours (166)
    - Reinforcements/Fillers (237)
  - Polymers (6.909)
    - General (904)
    - Standard Thermoplastics (2.599)
      - General (75)
      - Polyolefins (1.299)
      - Polystyrenes (170)
      - PVC (540)
      - Polyester (372)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.388)
      - General (92)
      - Styrene Copolymers (122)
      - PC/PMMA (166)
      - Polyamides (485)
      - POM/PBT/PP (117)
      - Technical Compounds (406)
    - PUR (487)
    - Other (1.531)
      - General (49)
      - Composites/Thermosets (308)
      - High Performance (319)
      - Biopolymers (446)
      - Elastomers/TPE (151)
      - Recyclate (258)
  - Other Materials (61)
  - Distribution (354)
- Machinery (534)
  - General (134)
  - Plant Construction (15)
  - Core Machines (312)
    - General (119)
    - Extrusion (38)
    - Injection Moulding (132)
    - Blow Moulding (15)
    - PUR (6)
    - Compression Moulding (2)
  - Peripherals (73)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (35)
- Processing (1.780)
  - General (485)
  - Extrusion (630)
    - General (20)
    - Flexible Films (306)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.491)
  - General (54)
  - Packaging (2.179)
  - Construction (356)
  - Automotive / Transport (1.043)
  - Electrical Appliances (236)
  - Consumer Goods (280)
  - Medical (218)
  - Technical (64)
  - Other (61)
- Regions and Countries (4.261)
  - World (197)
  - German-speaking Countries (504)
  - Europe (2.098)
    - General (520)
    - Italy (152)
    - France (158)
    - Spain/Portugal (106)
    - Great Britain/Ireland (533)
    - Low Countries (75)
    - Central Europe (183)
    - Scandinavia (48)
    - Russia (118)
    - Eastern Europe (62)
    - Southeastern Europe (143)
  - North America (502)
  - Asia (684)
    - General (123)
    - China (394)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (152)
  - Other (41)
  - South America (83)
- Other (3.357)
  - Recycling/Disposal (2.364)
  - Economic Trend (562)
  - Services (42)
  - Logistics (301)
  - Energy (88)
Production and Engineering (3.878)
- Polymer Materials (2.414)
  - Petrochemicals (66)
  - Charge (449)
    - General (15)
    - Masterbatches (115)
    - Additives (231)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.867)
    - General (32)
    - Standard Themoplastics (370)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (76)
    - Other (783)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (255)
      - Elastomers/TPE (115)
      - Recyclate (120)
  - Other (32)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (450)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (43)
  - Process (84)
  - Application (97)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (60)
- New Products (879)
  - Packaging (578)
  - Construction (35)
  - Automotive / Transport (103)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (850)
- Purchasing (110)
- General Management (210)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (103)
- Logistics (359)
People (1.520)
Industry (6.824)
- General (1.314)
- Associations/Institutions (2.589)
- Legislation (1.545)
- Environment / Health (1.366)
- plas.TV - Plastics unite(d) (10)
Events (1.197)
Plastic Fantastic (592)
Commentaries (89)
Interviews (170)
Notes by Publisher (84)