Show topic list

Markets Polymer Materials

ARKEMA French group buys Ashland's adhesives unit	08.09.2021
BRASKEM Partnership with Resinex / New PP portfolio for Europe's healthcare industry	08.09.2021
PETROCHEMICAL MARKETS PVC: Kem One declares force majeure on K70 grades	07.09.2021
LG CHEM Plans for major complex to produce eco-friendly products by 2028 / PBAT and POE plants to start in 2024 / First exports of bio-based super absorbent polymers	07.09.2021
PETROCHEMICAL MARKETS EVOH: Bottleneck results from forces majeures on upstream product VAM / Numerous sharp price increases	06.09.2021
DUPONT Worldwide price hikes for technical compounds / FM status remains unclear	02.09.2021
PETROCHEMICAL MARKETS Polyethylene: Sabic lifts force majeure / Allocations remain partially in place	02.09.2021
CHEMICAL INDUSTRY GERMANY VCI President Kullmann: “No all-clear for raw material supply” / Industry expects record sales growth / Electricity price cause for concern	02.09.2021
UPDATE - USA Hurricane Ida hammers infrastructure at US Gulf Coast / Numerous petchem plants without power / Forecasts say some production out for up to six weeks	01.09.2021
STAR PLASTICS US compounder sold to Akoya Capital / Plans for “aggressive growth”	01.09.2021
PETROCHEMICAL MARKETS EVA: Yet again, Versalis declares force majeure for Oberhausen	31.08.2021
PLASTICS ECONOMY GERMANY Raw material shortages everywhere / Fatal combination of more demand and less production	31.08.2021
AFYREN French specialist for organic acids to go public / Slight delay for Carling plant	31.08.2021
CORRECTION - PETROCHEMICAL MARKETS Propylene oxide: No force majeure at BASF / Plant for surfactants affected	30.08.2021
PETROCHEMICAL MARKETS Ineos Styrolution to end force majeure for ABS in Belgium	30.08.2021
USA Hurricane Ida makes landfall near New Orleans / Petrochemical plants shut down, ports closed	30.08.2021
INVISTA Shanghai expansion enters next phase / PA 6.6 capacity to more than double	30.08.2021
PLASTICS INDUSTRY GERMANY Sector serves as prime example for sustainability – DZ Bank study	30.08.2021
BRASKEM Distribution partnership with Nexeo Plastics	27.08.2021
EVONIK Venture capital arm invests in China again / Strategic focus on advanced materials	26.08.2021
PETROCHEMICAL MARKETS Polypropylene: LyondellBasell declares force majeure for German production site in Knapsack	25.08.2021
RAW MATERIALS CBI says UK stock shortages worst on record; plastics partially to blame / McDonald's halts sales of bottled drinks in UK	25.08.2021
LOTTE PP for medical sector with BASF stabiliser / Use in fibres, sheets under consideration	25.08.2021
FORMOSA PLASTICS US Gulf “Sunshine Project” delayed again / Charges of “environmental racism”	24.08.2021
BLOCKCHAIN TECHNOLOGY Recycling verification scheme / Franco-British project to help manufacturers identify best recyclate material	24.08.2021

Seite 104 von 349

Topic search

Plastics Information Europe

Polymer Prices (6.416)
- Petrochemicals (586)
- Standard Thermoplastics (1.033)
- PET (261)
- Engineering Thermoplastics (269)
- Recyclate (399)
  - General (6)
  - Standard Thermoplastics / Recyclate (196)
  - Engineering Thermoplastics / Recyclate (197)
- Polyurethanes (261)
- High Performance Polymers (2)
- Composites (195)
- Announcements (2.628)
- World Regions (620)
  - China (316)
    - Standard Thermoplastics (159)
    - Engineering Thermoplastics (157)
  - North America (180)
  - Russia (124)
- Spot Prices (137)
- Forecasts (25)
Companies (36.506)
- Polymer Materials (17.977)
  - Petrochemicals (3.263)
  - Charge (1.937)
    - General (99)
    - Masterbatches (344)
    - Additives (818)
    - Colours (400)
    - Reinforcements/Fillers (276)
  - Polymers (11.569)
    - General (747)
    - Standard Thermoplastics (4.022)
      - General (114)
      - Polyolefins (2.043)
      - Polystyrenes (362)
      - PVC (709)
      - Polyester (584)
      - Expandable (PS, PP, PE) (210)
    - Technical Thermoplastics (3.392)
      - General (352)
      - Styrene Copolymers (276)
      - PC/PMMA (481)
      - Polyamides (963)
      - POM/PBT/PP (331)
      - Technical Compounds (989)
    - PUR (817)
    - Other (2.591)
      - General (105)
      - Composites/Thermosets (417)
      - High Performance (651)
      - Biopolymers (719)
      - Elastomers/TPE (384)
      - Recyclate (315)
  - Distribution (1.208)
- Machinery (1.130)
  - General (32)
  - Plant Construction (145)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (184)
    - General (34)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.478)
  - General (938)
  - Extrusion (2.427)
    - General (129)
    - Flexible Films (1.176)
    - Rigid Films/Sheet (391)
    - Pipes (359)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.820)
  - Blow Moulding (540)
  - PUR (337)
  - Other (1.168)
    - General (131)
    - Foam (317)
    - Composites/Thermosets (360)
    - Thermoforming (230)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (248)
- Application (7.693)
  - General (141)
  - Packaging (3.317)
  - Construction (759)
  - Automotive / Transport (1.769)
  - Electrical Appliances (355)
  - Consumer Goods (710)
  - Medical (416)
  - Technical (226)
- Other (2.228)
  - Recycling/Disposal (1.780)
  - Services (262)
  - Logistics (186)
Commercial Register (168)
- Insolvency (162)
- Changes (6)
Markets (24.961)
- Polymer Materials (10.762)
  - Petrochemicals (2.652)
  - Charge (891)
    - General (40)
    - Masterbatches (100)
    - Additives (350)
    - Colours (165)
    - Reinforcements/Fillers (236)
  - Polymers (6.810)
    - General (883)
    - Standard Thermoplastics (2.569)
      - General (74)
      - Polyolefins (1.284)
      - Polystyrenes (169)
      - PVC (531)
      - Polyester (368)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.365)
      - General (90)
      - Styrene Copolymers (118)
      - PC/PMMA (163)
      - Polyamides (477)
      - POM/PBT/PP (116)
      - Technical Compounds (401)
    - PUR (481)
    - Other (1.512)
      - General (47)
      - Composites/Thermosets (304)
      - High Performance (316)
      - Biopolymers (445)
      - Elastomers/TPE (149)
      - Recyclate (251)
  - Other Materials (61)
  - Distribution (348)
- Machinery (530)
  - General (134)
  - Plant Construction (15)
  - Core Machines (309)
    - General (119)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.773)
  - General (479)
  - Extrusion (629)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.406)
  - General (52)
  - Packaging (2.134)
  - Construction (347)
  - Automotive / Transport (1.028)
  - Electrical Appliances (231)
  - Consumer Goods (278)
  - Medical (214)
  - Technical (64)
  - Other (58)
- Regions and Countries (4.228)
  - World (197)
  - German-speaking Countries (502)
  - Europe (2.074)
    - General (511)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (528)
    - Low Countries (75)
    - Central Europe (182)
    - Scandinavia (47)
    - Russia (116)
    - Eastern Europe (61)
    - Southeastern Europe (143)
  - North America (499)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (150)
  - Other (40)
  - South America (83)
- Other (3.262)
  - Recycling/Disposal (2.304)
  - Economic Trend (544)
  - Services (41)
  - Logistics (287)
  - Energy (86)
Production and Engineering (3.852)
- Polymer Materials (2.401)
  - Petrochemicals (65)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.860)
    - General (32)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (75)
    - Other (778)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (827)
- Purchasing (109)
- General Management (203)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (345)
People (1.515)
Industry (6.705)
- General (1.300)
- Associations/Institutions (2.550)
- Legislation (1.497)
- Environment / Health (1.348)
- plas.TV - Plastics unite(d) (10)
Events (1.192)
Plastic Fantastic (583)
Commentaries (86)
Interviews (165)
Notes by Publisher (83)