Show topic list

Markets

PLASTICS RECYCLING EUROPE PRE: “The European plastics recycling industry is facing imminent collapse” / Loss of reclaim capacities projected at 1 mn t by end-2025	01.09.2025
SPAIN Bottle deposit system to become mandatory end of 2026 / Recycling targets missed	01.09.2025
KLÖCKNER PENTAPLAST Film specialist may be facing financial difficulties – report	01.09.2025
VIONEO Fossil-free plastics ambitions raised after deal with PP partner / Lummus tech to prove commercial viability	01.09.2025
BYK Additive producer launches subsidiary in Brazil	01.09.2025
LOGISTICS Global trade heavily impacted by typhoon season / DB Cargo management plans to close workshops	29.08.2025
EUROPEAN CAR MARKET Registrations climb in July / US confirms lower tariff on EU vehicles / EV market share eases	29.08.2025
AKSA CARBON Turkish acrylic fibre manufacturer acquires Dow joint venture in its entirety	29.08.2025
SABIC JV with Plastic Energy produces first pyrolysis oil batch	29.08.2025
SINGLE-USE PLASTICS Recycling sector warns of market distortion under new EU implementing decision / Industry contends definitions / Non-EU waste may be counted towards targets	28.08.2025
USA Plastics machinery shipments steady in Q2 / Wider processing sentiment remains cautious	28.08.2025
PLASTICS PROCESSING GERMANY GKV reports further revenue drop in H1 / Packaging leads decline	28.08.2025
BIOPLASTICS Citroniq teams up with ABB to deliver ‘world's first' 100% biogenic PP plant / 600,000 t/y planned as of 2029	28.08.2025
SABIC Petchem giant launches thermoplastics moulding system / Cascade flow cuts clamp force by up to 50%	28.08.2025
RECYCLING SWITZERLAND Plastics waste recovered from households, collection rate up in 2024 / Recycling rate exceeds 55% threshold	27.08.2025
MATTERR Plans to build PET chemical recycling plant in Germany / EUR 63 mn invested	27.08.2025
PACKAGING GERMANY German packaging market shrank in 2024 / Plastic remains largest value segment	27.08.2025
TRIOWORLD Swedish filmmaker announces US production / Plant to come online in autumn	27.08.2025
ALBIS German plastics distributor acquires majority stake in Brazilian Tecnomatiz	27.08.2025
GERMAN ECONOMY Ifo business climate improves but only for technical reasons / Mood in plastics segment remains low	26.08.2025
MEDICAL TECHNOLOGY Industry grows only slightly, but against trend / PFAS ban could exert pressure / High usage of disposable products	26.08.2025
RECYCLING AUSTRIA Sizable increase in PET recycling volumes thanks to introduction of single-use deposit scheme	26.08.2025
KIVO / KRAS Recycling JV Reks to be discontinued / Future of plant in Kosovo uncertain	25.08.2025
RIGID PACKAGING Demand growth driven by developing countries in Asia, Middle East, Africa / Bioplastics to see fastest rise – Smithers report	25.08.2025
PACKAGING RECYCLING IRELAND Chances of meeting EU target this year fade – EPA / Waste generation edges higher in 2023	25.08.2025

Seite 47 von 663

Topic search

Plastics Information Europe

Polymer Prices (6.529)
- Petrochemicals (621)
- Standard Thermoplastics (1.056)
- PET (265)
- Engineering Thermoplastics (273)
- Recyclate (407)
  - General (6)
  - Standard Thermoplastics / Recyclate (200)
  - Engineering Thermoplastics / Recyclate (201)
- Polyurethanes (265)
- High Performance Polymers (2)
- Composites (199)
- Announcements (2.637)
- World Regions (634)
  - China (325)
    - Standard Thermoplastics (164)
    - Engineering Thermoplastics (161)
  - North America (185)
  - Russia (124)
- Spot Prices (141)
- Forecasts (29)
Companies (37.228)
- Polymer Materials (18.274)
  - Petrochemicals (3.328)
  - Charge (1.962)
    - General (102)
    - Masterbatches (347)
    - Additives (834)
    - Colours (402)
    - Reinforcements/Fillers (277)
  - Polymers (11.761)
    - General (758)
    - Standard Thermoplastics (4.081)
      - General (114)
      - Polyolefins (2.079)
      - Polystyrenes (364)
      - PVC (724)
      - Polyester (589)
      - Expandable (PS, PP, PE) (211)
    - Technical Thermoplastics (3.453)
      - General (354)
      - Styrene Copolymers (284)
      - PC/PMMA (491)
      - Polyamides (983)
      - POM/PBT/PP (341)
      - Technical Compounds (1.000)
    - PUR (832)
    - Other (2.637)
      - General (107)
      - Composites/Thermosets (420)
      - High Performance (661)
      - Biopolymers (726)
      - Elastomers/TPE (390)
      - Recyclate (333)
  - Distribution (1.223)
- Machinery (1.148)
  - General (33)
  - Plant Construction (148)
  - Core Machines (771)
    - General (92)
    - Extrusion (184)
    - Injection Moulding (389)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (17)
    - Compression Moulding (4)
  - Peripherals (190)
    - General (36)
    - Control Systems (4)
    - Automatisation (35)
    - Dies/Tools/Moulds (102)
    - Components (13)
  - Finishing (6)
- Processing (7.622)
  - General (950)
  - Extrusion (2.474)
    - General (132)
    - Flexible Films (1.199)
    - Rigid Films/Sheet (398)
    - Pipes (367)
    - Profiles/Rods (265)
    - Other (113)
  - Injection Moulding (1.858)
  - Blow Moulding (553)
  - PUR (343)
  - Other (1.189)
    - General (137)
    - Foam (321)
    - Composites/Thermosets (364)
    - Thermoforming (234)
    - Rotational Moulding (36)
    - Additive Manufacturing (97)
  - Finishing (255)
- Application (7.857)
  - General (146)
  - Packaging (3.387)
  - Construction (772)
  - Automotive / Transport (1.805)
  - Electrical Appliances (363)
  - Consumer Goods (725)
  - Medical (424)
  - Technical (235)
- Other (2.327)
  - Recycling/Disposal (1.857)
  - Services (265)
  - Logistics (205)
Commercial Register (176)
- Insolvency (170)
- Changes (6)
Markets (25.463)
- Polymer Materials (10.960)
  - Petrochemicals (2.707)
  - Charge (900)
    - General (43)
    - Masterbatches (100)
    - Additives (354)
    - Colours (166)
    - Reinforcements/Fillers (237)
  - Polymers (6.937)
    - General (912)
    - Standard Thermoplastics (2.607)
      - General (75)
      - Polyolefins (1.303)
      - Polystyrenes (171)
      - PVC (541)
      - Polyester (374)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.395)
      - General (92)
      - Styrene Copolymers (122)
      - PC/PMMA (167)
      - Polyamides (488)
      - POM/PBT/PP (118)
      - Technical Compounds (408)
    - PUR (488)
    - Other (1.535)
      - General (49)
      - Composites/Thermosets (309)
      - High Performance (319)
      - Biopolymers (446)
      - Elastomers/TPE (151)
      - Recyclate (261)
  - Other Materials (61)
  - Distribution (355)
- Machinery (537)
  - General (134)
  - Plant Construction (15)
  - Core Machines (313)
    - General (119)
    - Extrusion (38)
    - Injection Moulding (133)
    - Blow Moulding (15)
    - PUR (6)
    - Compression Moulding (2)
  - Peripherals (75)
    - General (21)
    - Automatisation (18)
    - Dies/Tools/Moulds (36)
- Processing (1.782)
  - General (486)
  - Extrusion (631)
    - General (20)
    - Flexible Films (307)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.520)
  - General (54)
  - Packaging (2.197)
  - Construction (358)
  - Automotive / Transport (1.049)
  - Electrical Appliances (238)
  - Consumer Goods (281)
  - Medical (218)
  - Technical (64)
  - Other (61)
- Regions and Countries (4.273)
  - World (197)
  - German-speaking Countries (504)
  - Europe (2.108)
    - General (525)
    - Italy (152)
    - France (158)
    - Spain/Portugal (107)
    - Great Britain/Ireland (534)
    - Low Countries (75)
    - Central Europe (184)
    - Scandinavia (48)
    - Russia (119)
    - Eastern Europe (63)
    - Southeastern Europe (143)
  - North America (503)
  - Asia (684)
    - General (123)
    - China (394)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (152)
  - Other (41)
  - South America (84)
- Other (3.391)
  - Recycling/Disposal (2.382)
  - Economic Trend (571)
  - Services (44)
  - Logistics (305)
  - Energy (89)
Production and Engineering (3.885)
- Polymer Materials (2.419)
  - Petrochemicals (66)
  - Charge (451)
    - General (15)
    - Masterbatches (116)
    - Additives (232)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.870)
    - General (32)
    - Standard Themoplastics (370)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (76)
    - Other (786)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (163)
      - Biopolymers (255)
      - Elastomers/TPE (115)
      - Recyclate (122)
  - Other (32)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (450)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (43)
  - Process (84)
  - Application (97)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (60)
- New Products (881)
  - Packaging (578)
  - Construction (35)
  - Automotive / Transport (104)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (39)
  - Technical (8)
  - Other (38)
- Other (40)
Management (864)
- Purchasing (111)
- General Management (216)
- Company organisation (45)
- Marketing/Sales (16)
- Human Resources (8)
- Finances (105)
- Logistics (363)
People (1.521)
Industry (6.870)
- General (1.326)
- Associations/Institutions (2.605)
- Legislation (1.556)
- Environment / Health (1.373)
- plas.TV - Plastics unite(d) (10)
Events (1.203)
Plastic Fantastic (593)
Commentaries (90)
Interviews (170)
Notes by Publisher (85)