www.pieweb.com

Industry

PACKAGING
Proposed EU quotas on reusable plastics are incomprehensible, says Germany's IK / Reusable quotas for beverages not ambitious enough, says NGO
07.12.2022
ELECTRONIC WASTE RECYCLING
WEEE shipment rules: European trade bodies seek simplification in Basel Convention amendments
06.12.2022
PACKAGING
EU draft law sets targets for reuse, recycling / Goal is to cut packaging waste / Chemical recycling to count towards reclaim quotas / Trade groups raise concerns
05.12.2022
PLASTICS AND ENERGY
Germany, Qatar announce LNG deal / Gulf state to supply some 2 mn t/y from 2026 / ConocoPhillips tapped as shipper
05.12.2022
LOGISTICS
The Kiel Canal is closed / Striking truck drivers in South Korea threatened with fines / Container prices continue to fall
01.12.2022
EUROPEAN ECONOMY
Eurozone inflation drops more than expected / Has the peak passed? / Volatile energy prices remain focus
01.12.2022
NESPRESSO
Paper-based coffee capsules as of 2023 / Barrier layer and lid in biopolymer
30.11.2022
TITANIUM DIOXIDE
EU general court overturns ECHA's classification as a carcinogen / Industry groups welcome decision / Market weakness
29.11.2022
MANUFACTURING
Economic indicators in Europe show surprise gains / Recession still coming, analysts warn
28.11.2022
BOREALIS
Solar power to feed Schwechat site / Partnership with Verbund
28.11.2022
LOGISTICS
Strikes and Covid lockdowns rupture global supply chains / Will the European petchem and polymer industries be dragged into the mess? / Prices for container freight stagnate
24.11.2022
FLEXIBLE PACKAGING
Latest industry developments: Ceflex and Alliance to End Plastic Waste collaborate on huge recycling facility / Flexibles market to grow 4.9% by 2030 / Siegwerk, Henkel develop new oxygen barrier coating
24.11.2022
AVERY DENNISON
CO2 emissions reduction with switch to reusable plastic pallets / Partnership with Tosca in the EU, UK
23.11.2022
PLASTICS AND CLIMATE
Plastics under attack at COP27 / UN agencies blame materials for waste, climate change / Official says, 'The future is not plastic'
22.11.2022
PACKAGING
Trade associations criticise EU packaging waste proposal / Targets said to lack scientific support / Call for guidelines based on ecological impacts
22.11.2022
LOGISTICS
Germany's DB Cargo to increases freight rates up to 45% / Criticism from trade associations
21.11.2022
ITALY
Forza Italia agrees to cancel plastic tax / Converters' association says levy could put excessive burden on the industry
21.11.2022
PLASTICS AND ENVIRONMENT
NGOs raise concerns on EU's revision to waste legislation / Circularity rate of 8.6% “dangerous for Europe's future”
21.11.2022
PLASTICS AND ENERGY
Germany completes first marine LNG terminal / Questions about speed of build up
18.11.2022
PLASTICS AND CLIMATE
Net-zero plans not enough to keep global warming at 1.5C / Faster decarbonisation action, focus on cutting consumption priority – ZWE report
18.11.2022
E&E RECYCLING
New protocols on recovery, reuse, ecodesign for E&E components / Multinational C-Servees project
18.11.2022
LOGISTICS
China sends huge trains west / LyondellBasell to charge for late returns of tank wagons / Ports suffer from freight declines
17.11.2022
EDITORIAL
Is Germany's proposed law to fund SUP recovery a long overdue move or a bureaucratic monster?
17.11.2022
BERRY GLOBAL
US packaging giant opts for European recyclate accreditation
17.11.2022
PLASTICS AND ENVIRONMENT
EMF says most firms to miss 2025 packaging targets / PCR use generally higher in 2021 / Virgin plastics consumption back to 2018 levels / Global progress report
16.11.2022
Seite 1 von 134
Topic search
Plastics Information Europe
  • Polymer Prices (5.250)
    • Petrochemicals (275)
    • Standard Thermoplastics (798)
    • PET (218)
    • Engineering Thermoplastics (222)
    • Recyclate (305)
      • Standard Thermoplastics / Recyclate (152)
      • Engineering Thermoplastics / Recyclate (153)
    • Polyurethanes (215)
    • High Performance Polymers (2)
    • Composites (152)
    • Announcements (2.478)
    • World Regions (491)
      • China (230)
        • Standard Thermoplastics (116)
        • Engineering Thermoplastics (114)
      • North America (137)
      • Russia (124)
    • Spot Prices (94)
  • Companies (29.421)
    • Polymer Materials (14.538)
      • Petrochemicals (2.586)
      • Charge (1.653)
        • General (83)
        • Masterbatches (314)
        • Additives (684)
        • Colours (325)
        • Reinforcements/Fillers (247)
      • Polymers (9.265)
        • General (570)
        • Standard Thermoplastics (3.229)
          • General (107)
          • Polyolefins (1.596)
          • Polystyrenes (289)
          • PVC (585)
          • Polyester (478)
          • Expandable (PS, PP, PE) (174)
        • Technical Thermoplastics (2.801)
          • General (330)
          • Styrene Copolymers (225)
          • PC/PMMA (371)
          • Polyamides (759)
          • POM/PBT/PP (271)
          • Technical Compounds (845)
        • PUR (673)
        • Other (1.992)
          • General (87)
          • Composites/Thermosets (372)
          • High Performance (512)
          • Biopolymers (580)
          • Elastomers/TPE (312)
          • Recyclate (129)
      • Distribution (1.034)
    • Machinery (1.019)
      • General (25)
      • Plant Construction (120)
      • Core Machines (702)
        • General (82)
        • Extrusion (172)
        • Injection Moulding (347)
        • Blow Moulding (69)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (168)
        • General (30)
        • Control Systems (4)
        • Automatisation (30)
        • Dies/Tools/Moulds (91)
        • Components (13)
      • Finishing (4)
    • Processing (6.290)
      • General (776)
      • Extrusion (2.074)
        • General (104)
        • Flexible Films (983)
        • Rigid Films/Sheet (345)
        • Pipes (308)
        • Profiles/Rods (244)
        • Other (90)
      • Injection Moulding (1.497)
      • Blow Moulding (459)
      • PUR (252)
      • Other (1.012)
        • General (107)
        • Foam (284)
        • Composites/Thermosets (316)
        • Thermoforming (188)
        • Rotational Moulding (29)
        • Additive Manufacturing (88)
      • Finishing (220)
    • Application (6.217)
      • General (114)
      • Packaging (2.628)
      • Construction (625)
      • Automotive / Transport (1.458)
      • Electrical Appliances (306)
      • Consumer Goods (563)
      • Medical (350)
      • Technical (173)
    • Other (1.357)
      • Recycling/Disposal (1.129)
      • Services (218)
      • Logistics (10)
  • Commercial Register (87)
    • Insolvency (82)
    • Changes (5)
  • Markets (19.252)
    • Polymer Materials (8.404)
      • Petrochemicals (1.996)
      • Charge (769)
        • General (38)
        • Masterbatches (84)
        • Additives (308)
        • Colours (132)
        • Reinforcements/Fillers (207)
      • Polymers (5.326)
        • General (523)
        • Standard Thermoplastics (2.105)
          • General (67)
          • Polyolefins (1.037)
          • Polystyrenes (135)
          • PVC (448)
          • Polyester (294)
          • Expandable (PS, PP, PE) (124)
        • Technical Thermoplastics (1.130)
          • General (85)
          • Styrene Copolymers (93)
          • PC/PMMA (132)
          • Polyamides (385)
          • POM/PBT/PP (96)
          • Technical Compounds (339)
        • PUR (403)
        • Other (1.165)
          • General (37)
          • Composites/Thermosets (273)
          • High Performance (266)
          • Biopolymers (362)
          • Elastomers/TPE (125)
          • Recyclate (102)
      • Other Materials (46)
      • Distribution (267)
    • Machinery (476)
      • General (122)
      • Plant Construction (13)
      • Core Machines (272)
        • General (101)
        • Extrusion (34)
        • Injection Moulding (116)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (69)
        • General (21)
        • Automatisation (15)
        • Dies/Tools/Moulds (33)
    • Processing (1.545)
      • General (351)
      • Extrusion (575)
        • General (20)
        • Flexible Films (275)
        • Rigid Films/Sheets (113)
        • Pipes (70)
        • Profiles/Rods (87)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (71)
      • Other (287)
        • General (19)
        • Foam (75)
        • Composites/Thermosets (133)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (32)
      • Finishing (44)
    • Applications (3.269)
      • General (27)
      • Packaging (1.493)
      • Construction (263)
      • Automotive / Transport (810)
      • Electrical Appliances (203)
      • Consumer Goods (200)
      • Medical (183)
      • Technical (51)
      • Other (39)
    • Regions and Countries (3.796)
      • World (187)
      • German-speaking Countries (427)
      • Europe (1.824)
        • General (419)
        • Italy (134)
        • France (151)
        • Spain/Portugal (87)
        • Great Britain/Ireland (483)
        • Low Countries (74)
        • Central Europe (168)
        • Scandinavia (43)
        • Russia (91)
        • Eastern Europe (42)
        • Southeastern Europe (132)
      • North America (453)
      • Asia (650)
        • General (113)
        • China (381)
        • Japan (49)
        • Korea (26)
        • India (81)
      • Middle East (139)
      • Other (36)
      • South America (80)
    • Other (1.762)
      • Recycling/Disposal (1.458)
      • Economic Trend (173)
      • Services (37)
      • Logistics (94)
  • Production and Engineering (3.285)
    • Polymer Materials (2.083)
      • Petrochemicals (42)
      • Charge (404)
        • General (12)
        • Masterbatches (102)
        • Additives (205)
        • Colours (50)
        • Reinforcements/Fillers (35)
      • Polymers (1.611)
        • General (26)
        • Standard Themoplastics (320)
        • Technical Thermoplastics (567)
          • General (19)
          • Styrene Copolymers (57)
          • PC/PMMA (59)
          • Polyamides (194)
          • POM/PBT/PP (63)
          • Technical Compounds (175)
        • PUR (65)
        • Other (633)
          • General (19)
          • Composites/Thermosets (102)
          • High Performance (154)
          • Biopolymers (194)
          • Elastomers/TPE (103)
          • Recyclate (61)
      • Other (26)
    • Machinery (92)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (31)
    • Research (351)
      • Polymer Materials (121)
      • Technical (12)
      • Product Development (36)
      • Process (67)
      • Application (76)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (35)
    • New Products (724)
      • Packaging (459)
      • Construction (32)
      • Automotive / Transport (90)
      • Electrical Appliances (24)
      • Consumer Goods (46)
      • Medical (34)
      • Technical (7)
      • Other (32)
    • Other (35)
  • Management (392)
    • Purchasing (64)
    • General Management (77)
    • Company organisation (42)
    • Marketing/Sales (12)
    • Human Resources (4)
    • Finances (67)
    • Logistics (126)
  • People (1.393)
  • Industry (4.459)
    • General (961)
    • Associations/Institutions (1.764)
    • Legislation (884)
    • Environment / Health (840)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.082)
  • Plastic Fantastic (453)
  • Commentaries (63)
  • Interviews (102)
  • Notes by Publisher (54)
© 2022 by Plastics Information Europe, Bad Homburg
Date of print: 07/12/2022
Ref: edvivr45ugqs0onfc1gapx55
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&tree=open&node=100358