Show topic list

Production and Engineering Machinery Injection Moulding

CORONAVIRUS Plastics industry sets its sights on face protection / “Overnight” mask and shield production scaled up	29.05.2020
AUDI More 3D printing with plastics / Auxiliary tools for the "R8"	15.04.2019
COVERIS First industrial injection compression system up and running / Joint development with Unilever and Plastisud	23.11.2015
ENGEL Energy saving retrofit process developed for injection moulding machines / Up to 50% less energy consumption	03.02.2014
EUROPEAN PLASTICS MACHINERY Energy efficiency guidance for extrusion blow moulding machines	14.01.2014
INJECTION MOULDING Introducing new “EUROMAP 60”: Energy measurement guidelines revised to allow for comparison between different machinery and production processes	08.02.2013
NETSTAL “Elion” injection moulding machine to be demonstrated at “Medtec” trade fair	22.01.2013
ENGEL AUSTRIA “e-cap” fully electric injection moulding machine to be highlighted at “Brau Beviale” in Nuremberg/ Unit is capable of producing almost 130,000 caps and closures per hour	17.10.2011
ENGEL AUSTRIA Double flighted screw enhances melt efficiencies / Reduced machine wear and improved throughput	25.07.2011
WITTMANN BATTENFELD Automatic detection of surface defects to be demonstrated at “K 2010”	20.10.2010
FERROMATIK MILACRON “F-Series” modular machines to replace existing ranges / Introduction in 2011 / Demonstration at “K 2010” / “Vitesse” and “Elektron” also on show	13.08.2010
HAITIAN Wide range of machines to be shown at K 2010 / Low cost packaging version of “Venus” series / “Mercury” high-end machines to be previewed	07.07.2010
DME Part ejection tool cuts time and mould making costs / Project for Airbus A380	10.06.2010
INJECTION MOULDING Innovation driver in medical technology / New developments to be presented at K 2010	26.05.2010
ARBURG Micro-injection module for production of miniature parts / Double screw can handle standard granules	18.05.2010
ARBURG Servo-electric and hydraulic combination in new “Allrounder H” / Energy savings of 40% claimed	01.04.2009
DR. BOY Machine manufacturer introduces new "XS" models for micro-injection moulding plus new energy-saving E series	18.03.2009
TREXEL Combination of "MuCell" with Ticona's long-fibre reinforced thermoplastics	22.08.2008
KRAUSSMAFFEI Agreement with Chinese mould maker Ace	30.04.2008
ENGEL “Exjection” technology at K 2007	11.10.2007
TREXEL Series III "MuCell" systems for small injection moulding machines	08.08.2007
ENGEL Synthetic oil with eight year guarantee / Reduced maintenance costs	07.12.2006
DEMAG PLASTICS GROUP Injection moulding machine plant in China / Back on course for growth after consolidation	02.11.2006
FANUC ROBOSHOT New line of injection moulding machines / Faster drive systems, faster injection speed	20.06.2006
EUROMAP Recommendation on magnetic mould clamping systems	06.06.2006

Seite 1 von 2

Topic search

Plastics Information Europe

Polymer Prices (5.672)
- Petrochemicals (379)
- Standard Thermoplastics (882)
- PET (234)
- Engineering Thermoplastics (240)
- Recyclate (339)
  - Standard Thermoplastics / Recyclate (169)
  - Engineering Thermoplastics / Recyclate (170)
- Polyurethanes (232)
- High Performance Polymers (2)
- Composites (168)
- Announcements (2.539)
- World Regions (541)
  - China (264)
    - Standard Thermoplastics (133)
    - Engineering Thermoplastics (131)
  - North America (153)
  - Russia (124)
- Spot Prices (111)
- Forecasts (5)
Companies (32.011)
- Polymer Materials (15.851)
  - Petrochemicals (2.849)
  - Charge (1.755)
    - General (88)
    - Masterbatches (328)
    - Additives (727)
    - Colours (354)
    - Reinforcements/Fillers (258)
  - Polymers (10.147)
    - General (643)
    - Standard Thermoplastics (3.514)
      - General (112)
      - Polyolefins (1.768)
      - Polystyrenes (315)
      - PVC (619)
      - Polyester (518)
      - Expandable (PS, PP, PE) (182)
    - Technical Thermoplastics (3.025)
      - General (340)
      - Styrene Copolymers (241)
      - PC/PMMA (416)
      - Polyamides (833)
      - POM/PBT/PP (297)
      - Technical Compounds (898)
    - PUR (729)
    - Other (2.236)
      - General (95)
      - Composites/Thermosets (387)
      - High Performance (567)
      - Biopolymers (651)
      - Elastomers/TPE (342)
      - Recyclate (194)
  - Distribution (1.100)
- Machinery (1.043)
  - General (26)
  - Plant Construction (127)
  - Core Machines (715)
    - General (85)
    - Extrusion (174)
    - Injection Moulding (353)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (171)
    - General (30)
    - Control Systems (4)
    - Automatisation (32)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.671)
  - General (828)
  - Extrusion (2.197)
    - General (110)
    - Flexible Films (1.057)
    - Rigid Films/Sheet (358)
    - Pipes (329)
    - Profiles/Rods (249)
    - Other (94)
  - Injection Moulding (1.592)
  - Blow Moulding (484)
  - PUR (272)
  - Other (1.068)
    - General (114)
    - Foam (298)
    - Composites/Thermosets (328)
    - Thermoforming (203)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (230)
- Application (6.768)
  - General (124)
  - Packaging (2.909)
  - Construction (673)
  - Automotive / Transport (1.550)
  - Electrical Appliances (318)
  - Consumer Goods (631)
  - Medical (368)
  - Technical (195)
- Other (1.678)
  - Recycling/Disposal (1.367)
  - Services (242)
  - Logistics (69)
Commercial Register (101)
- Insolvency (96)
- Changes (5)
Markets (21.321)
- Polymer Materials (9.255)
  - Petrochemicals (2.250)
  - Charge (816)
    - General (38)
    - Masterbatches (89)
    - Additives (324)
    - Colours (147)
    - Reinforcements/Fillers (218)
  - Polymers (5.837)
    - General (652)
    - Standard Thermoplastics (2.249)
      - General (73)
      - Polyolefins (1.113)
      - Polystyrenes (147)
      - PVC (467)
      - Polyester (319)
      - Expandable (PS, PP, PE) (130)
    - Technical Thermoplastics (1.205)
      - General (86)
      - Styrene Copolymers (97)
      - PC/PMMA (138)
      - Polyamides (413)
      - POM/PBT/PP (104)
      - Technical Compounds (367)
    - PUR (428)
    - Other (1.303)
      - General (42)
      - Composites/Thermosets (285)
      - High Performance (290)
      - Biopolymers (406)
      - Elastomers/TPE (132)
      - Recyclate (148)
  - Other Materials (57)
  - Distribution (295)
- Machinery (492)
  - General (127)
  - Plant Construction (14)
  - Core Machines (280)
    - General (105)
    - Extrusion (35)
    - Injection Moulding (119)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.615)
  - General (393)
  - Extrusion (590)
    - General (20)
    - Flexible Films (287)
    - Rigid Films/Sheets (114)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (10)
  - Injection Moulding (174)
  - Blow Moulding (43)
  - PUR (75)
  - Other (296)
    - General (20)
    - Foam (75)
    - Composites/Thermosets (135)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.693)
  - General (33)
  - Packaging (1.763)
  - Construction (282)
  - Automotive / Transport (882)
  - Electrical Appliances (211)
  - Consumer Goods (232)
  - Medical (192)
  - Technical (54)
  - Other (44)
- Regions and Countries (3.945)
  - World (193)
  - German-speaking Countries (461)
  - Europe (1.900)
    - General (452)
    - Italy (139)
    - France (153)
    - Spain/Portugal (94)
    - Great Britain/Ireland (495)
    - Low Countries (74)
    - Central Europe (171)
    - Scandinavia (43)
    - Russia (97)
    - Eastern Europe (44)
    - Southeastern Europe (138)
  - North America (471)
  - Asia (663)
    - General (117)
    - China (387)
    - Japan (49)
    - Korea (26)
    - India (84)
  - Middle East (140)
  - Other (37)
  - South America (80)
- Other (2.321)
  - Recycling/Disposal (1.772)
  - Economic Trend (291)
  - Services (40)
  - Logistics (170)
  - Energy (48)
Production and Engineering (3.567)
- Polymer Materials (2.237)
  - Petrochemicals (52)
  - Charge (425)
    - General (12)
    - Masterbatches (108)
    - Additives (217)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.730)
    - General (27)
    - Standard Themoplastics (348)
    - Technical Thermoplastics (584)
      - General (19)
      - Styrene Copolymers (61)
      - PC/PMMA (62)
      - Polyamides (198)
      - POM/PBT/PP (65)
      - Technical Compounds (179)
    - PUR (66)
    - Other (705)
      - General (21)
      - Composites/Thermosets (105)
      - High Performance (158)
      - Biopolymers (226)
      - Elastomers/TPE (107)
      - Recyclate (88)
  - Other (30)
- Machinery (93)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (32)
- Research (402)
  - Polymer Materials (135)
  - Technical (12)
  - Product Development (39)
  - Process (78)
  - Application (86)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (48)
- New Products (797)
  - Packaging (519)
  - Construction (33)
  - Automotive / Transport (97)
  - Electrical Appliances (25)
  - Consumer Goods (46)
  - Medical (35)
  - Technical (7)
  - Other (35)
- Other (38)
Management (574)
- Purchasing (95)
- General Management (118)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (85)
- Logistics (212)
People (1.446)
Industry (5.349)
- General (1.084)
- Associations/Institutions (2.074)
- Legislation (1.104)
- Environment / Health (1.077)
- plas.TV - Plastics unite(d) (10)
Events (1.105)
Plastic Fantastic (494)
Commentaries (75)
Interviews (119)
Notes by Publisher (68)