www.pieweb.com
Strengthen your position in business negotiations!
  • European market reports for standard and engineering,
    thermoplastics, polyurethanes, recyclate, composites/GRP,
    feedstocks – more than 100 grades of polymer covered.
  • MyPrices – individually configured reports and e-mail alerts
  • Comparative and analytical tools

Markets Processing

PLASTIC PACKAGING
EuPC says EU member states should reject multiannual financial framework / Levy could lead industry into recession / Long-term consequences are unpredictable
15.10.2019
DUPONT
Groundbreaking for USD 220m PI film expansion
15.10.2019
POLYNT-REICHHOLD
Investment in maleic and phthalic anhydride intermediates in Americas / New reactor in Italy planned
07.10.2019
PLASTICS PROCESSING GERMANY
GKV corrects annual forecast downwards / TecPart association sharply criticises populistic aberrations
04.10.2019
AGRICULTURAL PLASTICS RECYCLING
UK to get national collection scheme for non-packaging agriplastics
02.10.2019
THERMAL INSULATION
European demand to expand by 2.2% per year to 2023 / Growth slowdown in eastern Europe / EPS makes up one-quarter share / IAL Consultants study
26.09.2019
PLASTICS RECYCLING EUROPE
Over 100 partners sign "Circular Plastics Alliance" declaration / EU-wide voluntary targets for raising recyclate usage / EuPC, Cefic and FEAD among signatories
23.09.2019
COVESTRO
Divestment of European production of polycarbonate sheets to Germany's Serafin
20.09.2019
PLASTICS PROCESSING GERMANY
Turnover for H1 2019 down on 2018 / Heavy falls in June / Technical components still a big worry / Industrial packaging, building products and consumer goods also on the decline
06.09.2019
ALDI
Cotton swabs made of plastic to be replaced in Germany / Plastic packaging in UK to be reduced / Cooperation with Plastic Bank in the Philippines
05.09.2019
TURKEY
Plastics imports decline in first half of 2019 / Domestic consumption of commodities and end products hits rock bottom / Exports benefit from weak Turkish lira
28.08.2019
BREXIT
Leaked government report spells out worst-case scenario following no deal
26.08.2019
GREECE
"Plastic needs to be part of the solution and not part of the problem" / Vassilis Gounaris is next president of AHPI / Consumer perceptions need changing
08.08.2019
INTERPLASP
Spanish PU flexible block foams specialist to be taken over by India's Sheela Foam
08.08.2019
HUNTSMAN
US group acquires remaining share in maleic anhydride JV with Sasol
07.08.2019
BREXIT
No deal would be "dramatic act of self-sabotage" / Industry upbeat on economics / BPF survey
01.08.2019
PLASTICS INDUSTRY THAILAND
Polymer production growth supported by domestic and foreign investments / Strong demand from packaging and automotive sectors / Reliable logistics infrastructure
30.07.2019
SIDEL
Takeover of French mould maker Comep
26.07.2019
HUNTSMAN
Urethane-based 3D printing materials for footwear
18.07.2019
3D PRINTING
Global 3D printing materials market for healthcare set to skyrocket / Scarcity of compliant materials a challenge / Design influences print time and cost of parts / Frost & Sullivan and Wohlers reports
17.07.2019
PLASTIC PACKAGING TURKEY
Economic recession hits plastic packaging materials in Q1 2019 and full-year 2018 / Demand, output and imports fall but exports up
16.07.2019
EUPC
Annual meeting focuses on circular economy and sustainability / Cooperation between producers and converters to be intensified / New members elected to steering committee
05.07.2019
TURKEY
Engineering plastics consumption and imports to decline on economic woes
04.07.2019
SWISSPLAST
Thermoformer acquires CAP-Vakuform / Second investment in Bavaria within 12 months
28.06.2019
EURO-COMPOSITES
Investment of EUR 160m at site in Luxembourg / Composites panels for aerospace
25.06.2019
Seite 1 von 51
Topic search
Plastics Information Europe
  • Polymer Prices (4.270)
    • Petrochemicals (208)
    • Standard Thermoplastics (601)
    • PET (179)
    • Engineering Thermoplastics (183)
    • Recyclate (229)
      • Standard Thermoplastics / Recyclate (114)
      • Engineering Thermoplastics / Recyclate (115)
    • Polyurethanes (177)
    • High Performance Polymers (2)
    • Composites (114)
    • Announcements (2.173)
    • World Regions (349)
      • China (156)
        • Standard Thermoplastics (79)
        • Engineering Thermoplastics (77)
      • North America (99)
      • Russia (94)
    • Spot Prices (55)
  • Companies (22.727)
    • Polymer Materials (11.187)
      • Petrochemicals (1.981)
      • Charge (1.360)
        • General (58)
        • Masterbatches (263)
        • Additives (547)
        • Colours (270)
        • Reinforcements/Fillers (222)
      • Polymers (6.993)
        • General (383)
        • Standard Thermoplastics (2.532)
          • General (87)
          • Polyolefins (1.237)
          • Polystyrenes (207)
          • PVC (480)
          • Polyester (378)
          • Expandable (PS, PP, PE) (143)
        • Technical Thermoplastics (2.052)
          • General (282)
          • Styrene Copolymers (158)
          • PC/PMMA (264)
          • Polyamides (529)
          • POM/PBT/PP (184)
          • Technical Compounds (635)
        • PUR (513)
        • Other (1.513)
          • General (77)
          • Composites/Thermosets (314)
          • High Performance (388)
          • Biopolymers (467)
          • Elastomers/TPE (240)
          • Rezyklate (27)
      • Distribution (853)
    • Machinery (913)
      • General (16)
      • Plant Construction (101)
      • Core Machines (637)
        • General (68)
        • Extrusion (154)
        • Injection Moulding (322)
        • Blow Moulding (64)
        • Foam (10)
        • PUR (15)
        • Compression Moulding (4)
      • Peripherals (156)
        • General (26)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (84)
        • Components (13)
      • Finishing (3)
    • Processing (5.170)
      • General (647)
      • Extrusion (1.710)
        • General (81)
        • Flexible Films (800)
        • Rigid Films/Sheet (283)
        • Pipes (270)
        • Profiles/Rods (207)
        • Other (69)
      • Injection Moulding (1.230)
      • Blow Moulding (373)
      • PUR (202)
      • Other (822)
        • General (91)
        • Foam (223)
        • Composites/Thermosets (284)
        • Thermoforming (157)
        • Rotational Moulding (24)
        • Additive Manufacturing (43)
      • Finishing (186)
    • Application (4.790)
      • General (83)
      • Packaging (1.974)
      • Construction (502)
      • Automotive / Transport (1.189)
      • Electrical Appliances (250)
      • Consumer Goods (394)
      • Medical (264)
      • Technical (134)
    • Other (667)
      • Recycling/Disposal (522)
      • Services (145)
  • Commercial Register (66)
    • Insolvency (61)
    • Changes (5)
  • Markets (14.623)
    • Polymer Materials (6.341)
      • Petrochemicals (1.514)
      • Charge (639)
        • General (32)
        • Masterbatches (74)
        • Additives (240)
        • Colours (105)
        • Reinforcements/Fillers (188)
      • Polymers (3.992)
        • General (307)
        • Standard Thermoplastics (1.693)
          • General (47)
          • Polyolefins (832)
          • Polystyrenes (107)
          • PVC (355)
          • Polyester (240)
          • Expandable (PS, PP, PE) (112)
        • Technical Thermoplastics (813)
          • General (74)
          • Styrene Copolymers (57)
          • PC/PMMA (104)
          • Polyamides (274)
          • POM/PBT/PP (66)
          • Technical Compounds (238)
        • PUR (308)
        • Other (871)
          • General (31)
          • Composites/Thermosets (229)
          • High Performance (220)
          • Biopolymers (282)
          • Elastomers/TPE (95)
          • Recyclate (14)
      • Other Materials (12)
      • Distribution (184)
    • Machinery (426)
      • General (105)
      • Plant Construction (11)
      • Core Machines (242)
        • General (85)
        • Extrusion (31)
        • Injection Moulding (105)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.302)
      • General (271)
      • Extrusion (486)
        • General (18)
        • Flexible Films (229)
        • Rigid Films/Sheets (93)
        • Pipes (64)
        • Profiles/Rods (75)
        • Other (7)
      • Injection Moulding (170)
      • Blow Moulding (36)
      • PUR (58)
      • Other (240)
        • General (18)
        • Foam (53)
        • Composites/Thermosets (126)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (15)
      • Finishing (41)
    • Applications (2.348)
      • General (19)
      • Packaging (999)
      • Construction (215)
      • Automotive / Transport (660)
      • Electrical Appliances (165)
      • Consumer Goods (126)
      • Medical (103)
      • Technical (38)
      • Other (23)
    • Regions and Countries (3.440)
      • World (169)
      • German-speaking Countries (389)
      • Europe (1.667)
        • General (375)
        • Italy (124)
        • France (149)
        • Spain/Portugal (74)
        • Great Britain/Ireland (445)
        • Low Countries (73)
        • Central Europe (165)
        • Scandinavia (40)
        • Russia (83)
        • Eastern Europe (36)
        • Southeastern Europe (103)
      • North America (394)
      • Asia (577)
        • General (103)
        • China (329)
        • Japan (46)
        • Korea (24)
        • India (75)
      • Middle East (134)
      • Other (34)
      • South America (76)
    • Other (766)
      • Recycling/Disposal (698)
      • Economic Trend (45)
      • Services (23)
  • Production and Engineering (2.464)
    • Polymer Materials (1.598)
      • Petrochemicals (26)
      • Charge (321)
        • General (12)
        • Masterbatches (72)
        • Additives (165)
        • Colours (37)
        • Reinforcements/Fillers (35)
      • Polymers (1.227)
        • General (15)
        • Standard Themoplastics (231)
        • Technical Thermoplastics (467)
          • General (17)
          • Styrene Copolymers (42)
          • PC/PMMA (46)
          • Polyamides (160)
          • POM/PBT/PP (52)
          • Technical Compounds (150)
        • PUR (53)
        • Other (461)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (120)
          • Biopolymers (146)
          • Elastomers/TPE (85)
      • Other (24)
    • Machinery (83)
      • Extrusion (17)
        • General (7)
        • Flexible Films (4)
        • Calender (3)
        • Pipes/Profiles (3)
      • Injection Moulding (30)
        • General (14)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (233)
      • Polymer Materials (82)
      • Technical (10)
      • Product Development (26)
      • Process (53)
      • Application (45)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (15)
    • New Products (525)
      • Packaging (322)
      • Construction (26)
      • Automotive / Transport (70)
      • Electrical Appliances (21)
      • Consumer Goods (30)
      • Medical (26)
      • Technical (7)
      • Other (23)
    • Other (25)
  • Management (123)
    • Purchasing (23)
    • General Management (32)
    • Company organisation (28)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (29)
  • People (1.194)
  • Industry (2.660)
    • General (642)
    • Associations/Institutions (1.120)
    • Legislation (588)
    • Environment / Health (310)
  • Events (914)
  • Plastic Fantastic (339)
  • Commentaries (49)
  • Interviews (57)
  • Notes by Publisher (23)
© 2019 by Plastics Information Europe, Bad Homburg
Date of print: 15/10/2019
Ref: ovzc2aqwqh1lfvacdsxvozaa
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&tree=open&node=100245