Show topic list

Polymer Prices

POLYMER PRICES Forecast for ethylene, propylene price in May 2024: Crude price stabilises / Summer downturn likely for C2, C3	25.04.2024
POLYMER PRICES Polyurethane feedstocks April 2024: Production problems push prices up / Further upward trend likely to be limited due to weak demand / Some customer segments remain below potential	19.04.2024
POLYMER PRICES Engineering recyclate April 2024: Mixed market leads to increasing momentum / Demand needs more impetus to reach normal again / Further price hikes on the table	17.04.2024
POLYMER PRICES Standard recyclate April 2024: Low demand keeps recyclers under pressure / Increasing imports of favourably priced virgin material cause grief	16.04.2024
PIE SPOT PRICE MONITOR Prices turn downwards / Pressure from imports, weak demand expected in coming weeks	16.04.2024
KURARAY PVOH materials to become more expensive	12.04.2024
POLYMER PRICES Forecast ethylene and propylene trend May 2024: Price of crude leaps higher / Quotations for C2, C3 set to drop in summer	12.04.2024
POLYMER PRICES Standard thermoplastics trend April 2024: Upward trend continues due to increased feedstock costs / Demand nevertheless still weak	11.04.2024
POLYMER PRICES China engineering thermoplastics March 2024: Prices mostly unchanged amid disappointing demand / Only ABS, PA 6.6, PMMA prices move higher on back of rising input cost / April seen flat to higher	10.04.2024
POLYMER PRICES China standard thermoplastics March 2024: Prices largely unchanged despite rising cost / Demand mostly flat / PS, PET demand projected to increase in April	10.04.2024
POLYMER PRICES North America March 2024: Prices rise with firm energy rates / Cautious recovery in processing segments / Active hurricane season expected / Easing of feedstock costs caps expectations for April	09.04.2024
KURARAY Markups planned for thermoplastic elastomers	09.04.2024
ASCEND Another attempt to increase price of polyamide compounds	08.04.2024
POLYMER PRICES Engineering thermoplastics March 2024: Re-imports push their way onto the market / Demand remains weak especially from automotive	04.04.2024
POLYMER PRICES Composites/GRP March 2024: No momentum in sight around Easter / Rising resin prices could dampen demand in April / Glass fibre producers dispirited by cheap material from the Far East	04.04.2024
TRINSEO Fresh markups for styrenics	03.04.2024
POLYMER PRICES Polyethylene March 2024: Prices rise by much more than the monomer / Ordering late in the month proves advantageous / Imports in April expected to put a damper on price increases	03.04.2024
POLYMER PRICES Styrenics March 2024: Renewed triple-digit increases for PS, EPS, ABS / Upward trend loses momentum in April	03.04.2024
INEOS STYROLUTION Further markups for polystyrene	03.04.2024
POLYMER PRICES Polypropylene March 2024: Tight supply situation drives prices up at start of month / Promised imports, weak demand slow upswing / Upstream products to lead to further mark-ups in April	03.04.2024
POLYMER PRICES Feedstocks March/April 2024	03.04.2024
POLYMER PRICES Styrene April 2024: Reference climbs to highest level in 20 months	02.04.2024
POLYMER PRICES Ethylene April 2024: Contract delinks from spot development	02.04.2024
POLYMER PRICES PVC March 2024: Prices follow feedstock / Seasonal impulses prompt slight increase in demand / Firmer prices possible in April	02.04.2024
POLYMER PRICES PET March 2024: Prices pick up in second half of the month / Delays for imports / No end in sight to slump in demand / Little change likely in April	02.04.2024

Seite 1 von 227

Topic search

Plastics Information Europe

Polymer Prices (5.672)
- Petrochemicals (379)
- Standard Thermoplastics (882)
- PET (234)
- Engineering Thermoplastics (240)
- Recyclate (339)
  - Standard Thermoplastics / Recyclate (169)
  - Engineering Thermoplastics / Recyclate (170)
- Polyurethanes (232)
- High Performance Polymers (2)
- Composites (168)
- Announcements (2.539)
- World Regions (541)
  - China (264)
    - Standard Thermoplastics (133)
    - Engineering Thermoplastics (131)
  - North America (153)
  - Russia (124)
- Spot Prices (111)
- Forecasts (5)
Companies (32.005)
- Polymer Materials (15.847)
  - Petrochemicals (2.848)
  - Charge (1.755)
    - General (88)
    - Masterbatches (328)
    - Additives (727)
    - Colours (354)
    - Reinforcements/Fillers (258)
  - Polymers (10.144)
    - General (643)
    - Standard Thermoplastics (3.514)
      - General (112)
      - Polyolefins (1.768)
      - Polystyrenes (315)
      - PVC (619)
      - Polyester (518)
      - Expandable (PS, PP, PE) (182)
    - Technical Thermoplastics (3.024)
      - General (340)
      - Styrene Copolymers (241)
      - PC/PMMA (416)
      - Polyamides (832)
      - POM/PBT/PP (297)
      - Technical Compounds (898)
    - PUR (728)
    - Other (2.235)
      - General (95)
      - Composites/Thermosets (387)
      - High Performance (566)
      - Biopolymers (651)
      - Elastomers/TPE (342)
      - Recyclate (194)
  - Distribution (1.100)
- Machinery (1.043)
  - General (26)
  - Plant Construction (127)
  - Core Machines (715)
    - General (85)
    - Extrusion (174)
    - Injection Moulding (353)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (171)
    - General (30)
    - Control Systems (4)
    - Automatisation (32)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.670)
  - General (828)
  - Extrusion (2.196)
    - General (110)
    - Flexible Films (1.056)
    - Rigid Films/Sheet (358)
    - Pipes (329)
    - Profiles/Rods (249)
    - Other (94)
  - Injection Moulding (1.592)
  - Blow Moulding (484)
  - PUR (272)
  - Other (1.068)
    - General (114)
    - Foam (298)
    - Composites/Thermosets (328)
    - Thermoforming (203)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (230)
- Application (6.768)
  - General (124)
  - Packaging (2.909)
  - Construction (673)
  - Automotive / Transport (1.550)
  - Electrical Appliances (318)
  - Consumer Goods (631)
  - Medical (368)
  - Technical (195)
- Other (1.677)
  - Recycling/Disposal (1.367)
  - Services (242)
  - Logistics (68)
Commercial Register (101)
- Insolvency (96)
- Changes (5)
Markets (21.311)
- Polymer Materials (9.249)
  - Petrochemicals (2.248)
  - Charge (816)
    - General (38)
    - Masterbatches (89)
    - Additives (324)
    - Colours (147)
    - Reinforcements/Fillers (218)
  - Polymers (5.833)
    - General (651)
    - Standard Thermoplastics (2.249)
      - General (73)
      - Polyolefins (1.113)
      - Polystyrenes (147)
      - PVC (467)
      - Polyester (319)
      - Expandable (PS, PP, PE) (130)
    - Technical Thermoplastics (1.204)
      - General (86)
      - Styrene Copolymers (97)
      - PC/PMMA (138)
      - Polyamides (412)
      - POM/PBT/PP (104)
      - Technical Compounds (367)
    - PUR (427)
    - Other (1.302)
      - General (42)
      - Composites/Thermosets (285)
      - High Performance (289)
      - Biopolymers (406)
      - Elastomers/TPE (132)
      - Recyclate (148)
  - Other Materials (57)
  - Distribution (295)
- Machinery (492)
  - General (127)
  - Plant Construction (14)
  - Core Machines (280)
    - General (105)
    - Extrusion (35)
    - Injection Moulding (119)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.615)
  - General (393)
  - Extrusion (590)
    - General (20)
    - Flexible Films (287)
    - Rigid Films/Sheets (114)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (10)
  - Injection Moulding (174)
  - Blow Moulding (43)
  - PUR (75)
  - Other (296)
    - General (20)
    - Foam (75)
    - Composites/Thermosets (135)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.692)
  - General (33)
  - Packaging (1.762)
  - Construction (282)
  - Automotive / Transport (882)
  - Electrical Appliances (211)
  - Consumer Goods (232)
  - Medical (192)
  - Technical (54)
  - Other (44)
- Regions and Countries (3.945)
  - World (193)
  - German-speaking Countries (461)
  - Europe (1.900)
    - General (452)
    - Italy (139)
    - France (153)
    - Spain/Portugal (94)
    - Great Britain/Ireland (495)
    - Low Countries (74)
    - Central Europe (171)
    - Scandinavia (43)
    - Russia (97)
    - Eastern Europe (44)
    - Southeastern Europe (138)
  - North America (471)
  - Asia (663)
    - General (117)
    - China (387)
    - Japan (49)
    - Korea (26)
    - India (84)
  - Middle East (140)
  - Other (37)
  - South America (80)
- Other (2.318)
  - Recycling/Disposal (1.771)
  - Economic Trend (290)
  - Services (40)
  - Logistics (169)
  - Energy (48)
Production and Engineering (3.567)
- Polymer Materials (2.237)
  - Petrochemicals (52)
  - Charge (425)
    - General (12)
    - Masterbatches (108)
    - Additives (217)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.730)
    - General (27)
    - Standard Themoplastics (348)
    - Technical Thermoplastics (584)
      - General (19)
      - Styrene Copolymers (61)
      - PC/PMMA (62)
      - Polyamides (198)
      - POM/PBT/PP (65)
      - Technical Compounds (179)
    - PUR (66)
    - Other (705)
      - General (21)
      - Composites/Thermosets (105)
      - High Performance (158)
      - Biopolymers (226)
      - Elastomers/TPE (107)
      - Recyclate (88)
  - Other (30)
- Machinery (93)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (32)
- Research (402)
  - Polymer Materials (135)
  - Technical (12)
  - Product Development (39)
  - Process (78)
  - Application (86)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (48)
- New Products (797)
  - Packaging (519)
  - Construction (33)
  - Automotive / Transport (97)
  - Electrical Appliances (25)
  - Consumer Goods (46)
  - Medical (35)
  - Technical (7)
  - Other (35)
- Other (38)
Management (572)
- Purchasing (95)
- General Management (117)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (85)
- Logistics (211)
People (1.446)
Industry (5.340)
- General (1.082)
- Associations/Institutions (2.071)
- Legislation (1.102)
- Environment / Health (1.075)
- plas.TV - Plastics unite(d) (10)
Events (1.105)
Plastic Fantastic (494)
Commentaries (75)
Interviews (118)
Notes by Publisher (68)