www.pieweb.com

Industry Associations/Institutions

UN PLASTICS TREATY
No consensus after Busan talks / Petchem industry accused of ‘unsupportive' behavior / Rising endorsement of production caps / Further session planned
04.12.2024
AGRICULTURAL PLASTICS
Recycling infrastructure to include drip hoses, seed bags / Erde cooperation in Germany and Spain
02.12.2024
PACKAGING EUROPE
PPWR corrigendum officially approved by MEPs / Regulation expected to enter into force at start of 2025
28.11.2024
PLASTIC PACKAGING GERMANY
Recyclate share rises to 15% / IK to miss target for recycled plastics use of 1 mn t by wide margin / Bio-based polymers still niche
28.11.2024
PFAS / FLUOROPOLYMERS
Is the EU serious about the PFAS ban? / Interview with pro-K expert Michael Schlipf
27.11.2024
PLASTIC BAGS
Almost 5 bn fewer bags in circulation in Europe / Highest use in Baltic states – Eurostat
27.11.2024
BIOPLASTICS
EU-funded project on recycling, upcycling solutions for biodegradable plastics underway
26.11.2024
EUROPEAN PLASTICS INDUSTRY
Cheap polymer imports threaten circular economy ambitions / Share of global plastics production continues to slide – Plastics Europe report
25.11.2024
VINYLRECYCLING
Dutch PVC recycler files for insolvency / Dispute over categorisation of waste as secondary raw material
22.11.2024
EUROPEAN CAR MARKET
EU registrations rebound in October / Tariffs slowing Chinese imports / BEV demand to decline / Ford job cuts to focus on Germany
22.11.2024
CHEMICAL INDUSTRY GERMANY
Sales down in third quarter / Sentiment among VCI members ‘drastically poor'
21.11.2024
WASTE EXPORTS
UK shipments to Turkey on the rise again / 60% increase between 2022 and 2023 – Greenpeace
20.11.2024
AGRICULTURAL FILMS
Biodegradable mulch films added to European fertiliser regulation / Major headway for farming sustainability – EUBP
20.11.2024
FRANCE
Supreme court overturns ban on plastic packaging for fruits, vegetables / Second cancellation of ban's implementing decree reflects lack of legal stability – Elipso
15.11.2024
EUROPEAN POLITICS
EU commissioner candidates confirmed / Climate discussion front and centre / Von der Leyen plans to ‘engage' with Trump
14.11.2024
CHEMICAL RECYCLING
UK government accepts use of mass balance to verify chemically recycled plastics for packaging tax / EU member states show support, EC mulls it over
12.11.2024
ECHA
SVHC list extended to include flame retardant triphenyl phosphate
12.11.2024
PACKAGING EUROPE
Europen manifesto spells out industry's priorities / Trade body calls on EU to fast track PPWR
11.11.2024
PACKAGING GERMANY
German federal environment agency considers special levy on dairy-product packaging / Decision receives harsh criticism from associations
11.11.2024
PLASTICS AND ENVIRONMENT
Global partnership EPPIC receives fresh funding of USD 14 mn from US Department of State for fight against plastics pollution / Further support by Trump unlikely
07.11.2024
AUTOMOTIVE
EU starts tariffs on Chinese EVs / More consumers turn away from fossil fuel cars
31.10.2024
VERSALIS
Italian trade unions prep for token strike after announcement of petrochemical plans / “Not the best industrial strategy”
31.10.2024
CHEMICAL INDUSTRY GERMANY
Sales in chemical industry continue to decline in Germany, abroad – VCI
31.10.2024
PACKAGING WASTE
Eurostat data shows volumes in Europe barely decreasing year-on-year / Less than half recycled
30.10.2024
PACKAGING UK
Research reveals high levels of unnecessary plastic packaging in supermarkets
25.10.2024
Seite 1 von 89
Topic search
Plastics Information Europe
  • Polymer Prices (5.855)
    • Petrochemicals (430)
    • Standard Thermoplastics (924)
    • PET (242)
    • Engineering Thermoplastics (247)
    • Recyclate (353)
      • Standard Thermoplastics / Recyclate (176)
      • Engineering Thermoplastics / Recyclate (177)
    • Polyurethanes (239)
    • High Performance Polymers (2)
    • Composites (175)
    • Announcements (2.559)
    • World Regions (562)
      • China (278)
        • Standard Thermoplastics (140)
        • Engineering Thermoplastics (138)
      • North America (160)
      • Russia (124)
    • Spot Prices (118)
    • Forecasts (4)
  • Companies (33.282)
    • Polymer Materials (16.497)
      • Petrochemicals (2.962)
      • Charge (1.800)
        • General (89)
        • Masterbatches (332)
        • Additives (751)
        • Colours (367)
        • Reinforcements/Fillers (261)
      • Polymers (10.601)
        • General (673)
        • Standard Thermoplastics (3.672)
          • General (113)
          • Polyolefins (1.862)
          • Polystyrenes (323)
          • PVC (643)
          • Polyester (544)
          • Expandable (PS, PP, PE) (187)
        • Technical Thermoplastics (3.131)
          • General (348)
          • Styrene Copolymers (251)
          • PC/PMMA (442)
          • Polyamides (862)
          • POM/PBT/PP (305)
          • Technical Compounds (923)
        • PUR (765)
        • Other (2.360)
          • General (100)
          • Composites/Thermosets (399)
          • High Performance (589)
          • Biopolymers (681)
          • Elastomers/TPE (357)
          • Recyclate (234)
      • Distribution (1.134)
    • Machinery (1.065)
      • General (27)
      • Plant Construction (130)
      • Core Machines (731)
        • General (88)
        • Extrusion (176)
        • Injection Moulding (364)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (173)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.868)
      • General (858)
      • Extrusion (2.264)
        • General (112)
        • Flexible Films (1.092)
        • Rigid Films/Sheet (368)
        • Pipes (340)
        • Profiles/Rods (255)
        • Other (97)
      • Injection Moulding (1.648)
      • Blow Moulding (492)
      • PUR (287)
      • Other (1.086)
        • General (114)
        • Foam (302)
        • Composites/Thermosets (336)
        • Thermoforming (209)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (233)
    • Application (7.036)
      • General (125)
      • Packaging (3.037)
      • Construction (697)
      • Automotive / Transport (1.615)
      • Electrical Appliances (326)
      • Consumer Goods (653)
      • Medical (379)
      • Technical (204)
    • Other (1.816)
      • Recycling/Disposal (1.467)
      • Services (248)
      • Logistics (101)
  • Commercial Register (111)
    • Insolvency (106)
    • Changes (5)
  • Markets (22.275)
    • Polymer Materials (9.661)
      • Petrochemicals (2.350)
      • Charge (834)
        • General (38)
        • Masterbatches (90)
        • Additives (331)
        • Colours (153)
        • Reinforcements/Fillers (222)
      • Polymers (6.111)
        • General (721)
        • Standard Thermoplastics (2.349)
          • General (74)
          • Polyolefins (1.162)
          • Polystyrenes (154)
          • PVC (487)
          • Polyester (337)
          • Expandable (PS, PP, PE) (135)
        • Technical Thermoplastics (1.236)
          • General (87)
          • Styrene Copolymers (101)
          • PC/PMMA (146)
          • Polyamides (421)
          • POM/PBT/PP (106)
          • Technical Compounds (375)
        • PUR (444)
        • Other (1.361)
          • General (46)
          • Composites/Thermosets (287)
          • High Performance (293)
          • Biopolymers (421)
          • Elastomers/TPE (137)
          • Recyclate (177)
      • Other Materials (57)
      • Distribution (309)
    • Machinery (501)
      • General (127)
      • Plant Construction (14)
      • Core Machines (289)
        • General (109)
        • Extrusion (36)
        • Injection Moulding (123)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.642)
      • General (405)
      • Extrusion (597)
        • General (20)
        • Flexible Films (291)
        • Rigid Films/Sheets (116)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (177)
      • Blow Moulding (43)
      • PUR (77)
      • Other (299)
        • General (20)
        • Foam (77)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.904)
      • General (37)
      • Packaging (1.882)
      • Construction (297)
      • Automotive / Transport (932)
      • Electrical Appliances (212)
      • Consumer Goods (243)
      • Medical (198)
      • Technical (56)
      • Other (47)
    • Regions and Countries (4.017)
      • World (194)
      • German-speaking Countries (472)
      • Europe (1.944)
        • General (464)
        • Italy (142)
        • France (155)
        • Spain/Portugal (97)
        • Great Britain/Ireland (502)
        • Low Countries (74)
        • Central Europe (173)
        • Scandinavia (44)
        • Russia (107)
        • Eastern Europe (46)
        • Southeastern Europe (140)
      • North America (481)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (141)
      • Other (37)
      • South America (81)
    • Other (2.550)
      • Recycling/Disposal (1.908)
      • Economic Trend (344)
      • Services (41)
      • Logistics (203)
      • Energy (54)
  • Production and Engineering (3.706)
    • Polymer Materials (2.313)
      • Petrochemicals (55)
      • Charge (436)
        • General (14)
        • Masterbatches (111)
        • Additives (223)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.792)
        • General (30)
        • Standard Themoplastics (356)
        • Technical Thermoplastics (593)
          • General (19)
          • Styrene Copolymers (62)
          • PC/PMMA (62)
          • Polyamides (203)
          • POM/PBT/PP (67)
          • Technical Compounds (180)
        • PUR (71)
        • Other (742)
          • General (21)
          • Composites/Thermosets (107)
          • High Performance (159)
          • Biopolymers (240)
          • Elastomers/TPE (113)
          • Recyclate (102)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (422)
      • Polymer Materials (140)
      • Technical (13)
      • Product Development (40)
      • Process (81)
      • Application (89)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (55)
    • New Products (839)
      • Packaging (549)
      • Construction (34)
      • Automotive / Transport (99)
      • Electrical Appliances (26)
      • Consumer Goods (49)
      • Medical (37)
      • Technical (7)
      • Other (38)
    • Other (38)
  • Management (637)
    • Purchasing (100)
    • General Management (137)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (88)
    • Logistics (248)
  • People (1.474)
  • Industry (5.743)
    • General (1.136)
    • Associations/Institutions (2.212)
    • Legislation (1.212)
    • Environment / Health (1.173)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.122)
  • Plastic Fantastic (522)
  • Commentaries (78)
  • Interviews (131)
  • Notes by Publisher (69)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 05/12/2024
Ref: 4i0jsj553aoenxuxcrssyjrf
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_253105&node=100359