www.pieweb.com

Industry Legislation

CHEMICAL RECYCLING
Zero Waste Europe calls for virgin production cap over chemical reclaim / Industry sees benefit for mixed plastics waste
10.12.2024
PET BOTTLES GERMANY
Consumption down to 408,000 t / First time recyclates outnumber virgin material in moulding blanks – GVM study
10.12.2024
PVC
UK hits imports of US-made S-PVC with swingeing tariffs / Inovyn alleged stateside producers of dumping material
09.12.2024
UN PLASTICS TREATY
No consensus after Busan talks / Petchem industry accused of ‘unsupportive' behaviour / Rising endorsement of production caps / Further session planned
04.12.2024
UK
Government stresses support for deposit return scheme / Announcement follows Welsh move to shelve DRS plan
03.12.2024
SPAIN
DRS for plastic bottles to be introduced by 2026 / Alternative system well short of target / Environmentalists praise long-awaited step
02.12.2024
PACKAGING EUROPE
PPWR corrigendum officially approved by MEPs / Regulation expected to enter into force at start of 2025
28.11.2024
PFAS / FLUOROPOLYMERS
Is the EU serious about the PFAS ban? / Interview with pro-K expert Michael Schlipf
27.11.2024
SWEDEN
Industry praises cancellation of plastic bag tax / Move could bolster competitiveness against imports / Abolishment not expected to affect plastics waste management
26.11.2024
VINYLRECYCLING
Dutch PVC recycler files for insolvency / Dispute over categorisation of waste as secondary raw material
22.11.2024
AGRICULTURAL FILMS
Biodegradable mulch films added to European fertiliser regulation / Major headway for farming sustainability – EUBP
20.11.2024
PVC
UK government proposes tariffs on US-made S-PVC / British shops voice fears over impact
19.11.2024
FRANCE
Supreme court overturns ban on plastic packaging for fruits, vegetables / Second cancellation of ban's implementing decree reflects lack of legal stability – Elipso
15.11.2024
PVC
India's anti-dumping duties beneficial for European producers / Exports to the country could be worthwhile again
14.11.2024
EUROPEAN POLITICS
EU commissioner candidates confirmed / Climate discussion front and centre / Von der Leyen plans to ‘engage' with Trump
14.11.2024
CHEMICAL RECYCLING
UK government accepts use of mass balance to verify chemically recycled plastics for packaging tax / EU member states show support, EC mulls it over
12.11.2024
POLAND
DRS introduction postponed to October 2025 / Operators voice discontent with decision
12.11.2024
ECHA
SVHC list extended to include flame retardant triphenyl phosphate
12.11.2024
PACKAGING EUROPE
Europen manifesto spells out industry's priorities / Trade body calls on EU to fast track PPWR
11.11.2024
PACKAGING GERMANY
German federal environment agency considers special levy on dairy-product packaging / Decision receives harsh criticism from associations
11.11.2024
PLASTICS AND ENVIRONMENT
Global partnership EPPIC receives fresh funding of USD 14 mn from US Department of State for fight against plastics pollution / Further support by Trump unlikely
07.11.2024
PACKAGING UK
Government urged to help reduce packaging use, facilitate recycling / LGA calls for review of moves to cut EPR fees
05.11.2024
AUTOMOTIVE
EU starts tariffs on Chinese EVs / More consumers turn away from fossil fuel cars
31.10.2024
CZECH REPUBLIC
DRS for PET bottles, metal cans gets government go-ahead
31.10.2024
BASF
EPS capacity expansion at Ludwighsafen up to 2027 / New EU insulation legislation expected to drive demand
29.10.2024
Seite 1 von 49
Topic search
Plastics Information Europe
  • Polymer Prices (5.858)
    • Petrochemicals (430)
    • Standard Thermoplastics (924)
    • PET (242)
    • Engineering Thermoplastics (248)
    • Recyclate (353)
      • Standard Thermoplastics / Recyclate (176)
      • Engineering Thermoplastics / Recyclate (177)
    • Polyurethanes (239)
    • High Performance Polymers (2)
    • Composites (176)
    • Announcements (2.559)
    • World Regions (563)
      • China (278)
        • Standard Thermoplastics (140)
        • Engineering Thermoplastics (138)
      • North America (161)
      • Russia (124)
    • Spot Prices (118)
    • Forecasts (4)
  • Companies (33.327)
    • Polymer Materials (16.524)
      • Petrochemicals (2.964)
      • Charge (1.800)
        • General (89)
        • Masterbatches (332)
        • Additives (751)
        • Colours (367)
        • Reinforcements/Fillers (261)
      • Polymers (10.621)
        • General (673)
        • Standard Thermoplastics (3.679)
          • General (113)
          • Polyolefins (1.868)
          • Polystyrenes (323)
          • PVC (644)
          • Polyester (544)
          • Expandable (PS, PP, PE) (187)
        • Technical Thermoplastics (3.137)
          • General (348)
          • Styrene Copolymers (252)
          • PC/PMMA (443)
          • Polyamides (862)
          • POM/PBT/PP (306)
          • Technical Compounds (926)
        • PUR (766)
        • Other (2.366)
          • General (100)
          • Composites/Thermosets (400)
          • High Performance (589)
          • Biopolymers (683)
          • Elastomers/TPE (358)
          • Recyclate (236)
      • Distribution (1.139)
    • Machinery (1.065)
      • General (27)
      • Plant Construction (130)
      • Core Machines (731)
        • General (88)
        • Extrusion (176)
        • Injection Moulding (364)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (173)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.875)
      • General (860)
      • Extrusion (2.266)
        • General (112)
        • Flexible Films (1.093)
        • Rigid Films/Sheet (368)
        • Pipes (341)
        • Profiles/Rods (255)
        • Other (97)
      • Injection Moulding (1.650)
      • Blow Moulding (492)
      • PUR (288)
      • Other (1.086)
        • General (114)
        • Foam (302)
        • Composites/Thermosets (336)
        • Thermoforming (209)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (233)
    • Application (7.044)
      • General (125)
      • Packaging (3.041)
      • Construction (697)
      • Automotive / Transport (1.617)
      • Electrical Appliances (327)
      • Consumer Goods (654)
      • Medical (379)
      • Technical (204)
    • Other (1.819)
      • Recycling/Disposal (1.469)
      • Services (248)
      • Logistics (102)
  • Commercial Register (111)
    • Insolvency (106)
    • Changes (5)
  • Markets (22.313)
    • Polymer Materials (9.677)
      • Petrochemicals (2.353)
      • Charge (834)
        • General (38)
        • Masterbatches (90)
        • Additives (331)
        • Colours (153)
        • Reinforcements/Fillers (222)
      • Polymers (6.120)
        • General (722)
        • Standard Thermoplastics (2.354)
          • General (74)
          • Polyolefins (1.165)
          • Polystyrenes (154)
          • PVC (488)
          • Polyester (338)
          • Expandable (PS, PP, PE) (135)
        • Technical Thermoplastics (1.237)
          • General (87)
          • Styrene Copolymers (101)
          • PC/PMMA (146)
          • Polyamides (421)
          • POM/PBT/PP (107)
          • Technical Compounds (375)
        • PUR (444)
        • Other (1.363)
          • General (46)
          • Composites/Thermosets (288)
          • High Performance (293)
          • Biopolymers (422)
          • Elastomers/TPE (137)
          • Recyclate (177)
      • Other Materials (57)
      • Distribution (313)
    • Machinery (501)
      • General (127)
      • Plant Construction (14)
      • Core Machines (289)
        • General (109)
        • Extrusion (36)
        • Injection Moulding (123)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.643)
      • General (405)
      • Extrusion (598)
        • General (20)
        • Flexible Films (292)
        • Rigid Films/Sheets (116)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (177)
      • Blow Moulding (43)
      • PUR (77)
      • Other (299)
        • General (20)
        • Foam (77)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.912)
      • General (37)
      • Packaging (1.887)
      • Construction (297)
      • Automotive / Transport (934)
      • Electrical Appliances (213)
      • Consumer Goods (243)
      • Medical (198)
      • Technical (56)
      • Other (47)
    • Regions and Countries (4.019)
      • World (194)
      • German-speaking Countries (472)
      • Europe (1.945)
        • General (465)
        • Italy (142)
        • France (155)
        • Spain/Portugal (97)
        • Great Britain/Ireland (502)
        • Low Countries (74)
        • Central Europe (173)
        • Scandinavia (44)
        • Russia (107)
        • Eastern Europe (46)
        • Southeastern Europe (140)
      • North America (482)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (141)
      • Other (37)
      • South America (81)
    • Other (2.561)
      • Recycling/Disposal (1.915)
      • Economic Trend (345)
      • Services (41)
      • Logistics (204)
      • Energy (56)
  • Production and Engineering (3.709)
    • Polymer Materials (2.315)
      • Petrochemicals (55)
      • Charge (436)
        • General (14)
        • Masterbatches (111)
        • Additives (223)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.794)
        • General (30)
        • Standard Themoplastics (357)
        • Technical Thermoplastics (593)
          • General (19)
          • Styrene Copolymers (62)
          • PC/PMMA (62)
          • Polyamides (203)
          • POM/PBT/PP (67)
          • Technical Compounds (180)
        • PUR (72)
        • Other (742)
          • General (21)
          • Composites/Thermosets (107)
          • High Performance (159)
          • Biopolymers (240)
          • Elastomers/TPE (113)
          • Recyclate (102)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (422)
      • Polymer Materials (140)
      • Technical (13)
      • Product Development (40)
      • Process (81)
      • Application (89)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (55)
    • New Products (840)
      • Packaging (550)
      • Construction (34)
      • Automotive / Transport (99)
      • Electrical Appliances (26)
      • Consumer Goods (49)
      • Medical (37)
      • Technical (7)
      • Other (38)
    • Other (38)
  • Management (638)
    • Purchasing (100)
    • General Management (137)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (88)
    • Logistics (249)
  • People (1.476)
  • Industry (5.754)
    • General (1.140)
    • Associations/Institutions (2.215)
    • Legislation (1.215)
    • Environment / Health (1.174)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.122)
  • Plastic Fantastic (523)
  • Commentaries (78)
  • Interviews (131)
  • Notes by Publisher (69)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 11/12/2024
Ref: a0ft5zjwu1zsv455acnewo45
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_251448&node=100360