www.pieweb.com

Industry Associations/Institutions

PLASTICS PRODUCTION GERMANY
Positive figures in 2021 despite difficult environment / New Plastics Europe Deutschland president comes from Evonik / Clear no to gas embargo / “Challenging scenario” expected for 2022
13.05.2022
AUTOMOTIVE INDUSTRY
US, European car market contraction continues due to supply chain issues and the war / EV sales surge / Rebound later this year?
10.05.2022
RECYCLING USA
Plastics pollution probe launched in California / ExxonMobil issued subpoena
10.05.2022
CHEMICAL INDUSTRY GERMANY
Russian oil embargo to spur problems / End of gas shipments would be worse
09.05.2022
ALUMINIUM INDUSTRY
Looking outside the box: Record high in 2021 on sustained recovery of demand in Europe / Deliveries grow 3.9% / Exports decline 15%
06.05.2022
RECYCLASS
Approval of series of polymers, other products for recycling processes
05.05.2022
GERMAN ECONOMY
Ifo Institute: Firms express less pessimism after terrible March poll result / Material shortages ease / Decline in number of companies worried about survival
03.05.2022
PLASTICS MACHINERY ITALY
Strong recovery in 2021 / Market exceeds pre-pandemic level as imports set record / Ukraine war, supply shortages endanger development
03.05.2022
PLASTICS AND ENVIRONMENT
EuPC and Plastics Europe open public consultation on plans for Ocean Clean Sweep certification scheme
03.05.2022
CIRCULAR ECONOMY
Second report from Plastics Europe / 4.6 mn t of post-consumer recycled plastics used in 2020
02.05.2022
PLASTICS AND ENVIRONMENT
Study for European Commission explores scenarios for PVC phase-out
02.05.2022
PLASTICS INDUSTRY ASSOCIATION
Seaholm to helm US lobbying group / Former position as head of recyclable bag division raises questions
29.04.2022
PLASTICS RECYCLING ITALY
Working to harmonise recycled content efforts with Europe / PSV scheme approved by CPA
26.04.2022
EVENTS
VinylPlus Sustainability Forum 2022 to be held virtually on 25 May
26.04.2022
PLASTICS RECYCLING CANADA
CPP releases guidance to help firms following the Golden Design Rules for Plastic Packaging
25.04.2022
RECYCLASS
Traceability certification gets official recognition from Circular Plastics Alliance
12.04.2022
EUMBC
Annual masterbatch conference on 3 May in Belgium / Focus on chemical recycling and health issues
11.04.2022
PLASTIC PACKAGING GERMANY
Draft law calls for processors to pay for disposal of throwaway products / Packaging group claims proposal flouts EU regs
08.04.2022
CHEMICAL INDUSTRY
Cefic unveils plans to improve REACH dossiers / Goal is more transparency
07.04.2022
RAW MATERIALS
German supply issues worsen / Ukraine war intensifies situation / Ifo report
06.04.2022
EUROPEAN ECONOMY
German, Spanish inflation hit highest marks since 1980s / Ukraine war spurs price surge
31.03.2022
PLASTICS INDUSTRY ASSOCIATION
President of US group exits after less than three years / No word on a successor
31.03.2022
GERMAN ECONOMY
Ifo cuts 2022 growth forecast, raises inflation outlook due to war
30.03.2022
LABEL INDUSTRY EUROPE
Finat reports record growth / Manufacturers suffer due to raw material shortage
29.03.2022
PLASTICS RECYCLING
PolyCert, MORE platform cooperate to meet CPA target
29.03.2022
Seite 1 von 65
Topic search
Plastics Information Europe
  • Polymer Prices (4.456)
    • Petrochemicals (219)
    • Standard Thermoplastics (644)
    • PET (188)
    • Engineering Thermoplastics (192)
    • Recyclate (247)
      • Standard Thermoplastics / Recyclate (123)
      • Engineering Thermoplastics / Recyclate (124)
    • Polyurethanes (186)
    • High Performance Polymers (2)
    • Composites (122)
    • Announcements (2.212)
    • World Regions (381)
      • China (172)
        • Standard Thermoplastics (87)
        • Engineering Thermoplastics (85)
      • North America (107)
      • Russia (102)
    • Spot Prices (63)
  • Companies (24.084)
    • Polymer Materials (11.832)
      • Petrochemicals (2.084)
      • Charge (1.437)
        • General (65)
        • Masterbatches (278)
        • Additives (584)
        • Colours (283)
        • Reinforcements/Fillers (227)
      • Polymers (7.421)
        • General (410)
        • Standard Thermoplastics (2.657)
          • General (89)
          • Polyolefins (1.305)
          • Polystyrenes (221)
          • PVC (497)
          • Polyester (397)
          • Expandable (PS, PP, PE) (148)
        • Technical Thermoplastics (2.205)
          • General (294)
          • Styrene Copolymers (168)
          • PC/PMMA (286)
          • Polyamides (575)
          • POM/PBT/PP (198)
          • Technical Compounds (684)
        • PUR (537)
        • Other (1.612)
          • General (78)
          • Composites/Thermosets (327)
          • High Performance (416)
          • Biopolymers (486)
          • Elastomers/TPE (254)
          • Recyclate (51)
      • Distribution (890)
    • Machinery (951)
      • General (20)
      • Plant Construction (106)
      • Core Machines (661)
        • General (75)
        • Extrusion (159)
        • Injection Moulding (332)
        • Blow Moulding (65)
        • Foam (10)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (160)
        • General (28)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (86)
        • Components (13)
      • Finishing (4)
    • Processing (5.445)
      • General (679)
      • Extrusion (1.784)
        • General (83)
        • Flexible Films (836)
        • Rigid Films/Sheet (300)
        • Pipes (279)
        • Profiles/Rods (213)
        • Other (73)
      • Injection Moulding (1.307)
      • Blow Moulding (388)
      • PUR (213)
      • Other (881)
        • General (96)
        • Foam (235)
        • Composites/Thermosets (295)
        • Thermoforming (163)
        • Rotational Moulding (26)
        • Additive Manufacturing (66)
      • Finishing (193)
    • Application (5.106)
      • General (90)
      • Packaging (2.105)
      • Construction (527)
      • Automotive / Transport (1.259)
      • Electrical Appliances (261)
      • Consumer Goods (421)
      • Medical (298)
      • Technical (145)
    • Other (750)
      • Recycling/Disposal (590)
      • Services (160)
  • Commercial Register (72)
    • Insolvency (67)
    • Changes (5)
  • Markets (15.341)
    • Polymer Materials (6.608)
      • Petrochemicals (1.556)
      • Charge (667)
        • General (32)
        • Masterbatches (78)
        • Additives (252)
        • Colours (113)
        • Reinforcements/Fillers (192)
      • Polymers (4.181)
        • General (331)
        • Standard Thermoplastics (1.758)
          • General (47)
          • Polyolefins (864)
          • Polystyrenes (109)
          • PVC (370)
          • Polyester (255)
          • Expandable (PS, PP, PE) (113)
        • Technical Thermoplastics (855)
          • General (75)
          • Styrene Copolymers (58)
          • PC/PMMA (109)
          • Polyamides (290)
          • POM/PBT/PP (67)
          • Technical Compounds (256)
        • PUR (318)
        • Other (919)
          • General (31)
          • Composites/Thermosets (235)
          • High Performance (228)
          • Biopolymers (298)
          • Elastomers/TPE (100)
          • Recyclate (27)
      • Other Materials (12)
      • Distribution (192)
    • Machinery (439)
      • General (110)
      • Plant Construction (12)
      • Core Machines (249)
        • General (88)
        • Extrusion (32)
        • Injection Moulding (108)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.362)
      • General (294)
      • Extrusion (501)
        • General (18)
        • Flexible Films (235)
        • Rigid Films/Sheets (98)
        • Pipes (66)
        • Profiles/Rods (77)
        • Other (7)
      • Injection Moulding (172)
      • Blow Moulding (39)
      • PUR (60)
      • Other (254)
        • General (19)
        • Foam (56)
        • Composites/Thermosets (129)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (22)
      • Finishing (42)
    • Applications (2.546)
      • General (21)
      • Packaging (1.079)
      • Construction (224)
      • Automotive / Transport (702)
      • Electrical Appliances (172)
      • Consumer Goods (136)
      • Medical (143)
      • Technical (41)
      • Other (28)
    • Regions and Countries (3.513)
      • World (170)
      • German-speaking Countries (392)
      • Europe (1.707)
        • General (383)
        • Italy (129)
        • France (151)
        • Spain/Portugal (77)
        • Great Britain/Ireland (456)
        • Low Countries (73)
        • Central Europe (167)
        • Scandinavia (41)
        • Russia (83)
        • Eastern Europe (38)
        • Southeastern Europe (109)
      • North America (403)
      • Asia (596)
        • General (104)
        • China (345)
        • Japan (47)
        • Korea (24)
        • India (76)
      • Middle East (135)
      • Other (34)
      • South America (76)
    • Other (873)
      • Recycling/Disposal (778)
      • Economic Trend (60)
      • Services (29)
      • Logistics (6)
  • Production and Engineering (2.576)
    • Polymer Materials (1.667)
      • Petrochemicals (27)
      • Charge (338)
        • General (12)
        • Masterbatches (77)
        • Additives (175)
        • Colours (39)
        • Reinforcements/Fillers (35)
      • Polymers (1.277)
        • General (15)
        • Standard Themoplastics (247)
        • Technical Thermoplastics (478)
          • General (17)
          • Styrene Copolymers (45)
          • PC/PMMA (48)
          • Polyamides (162)
          • POM/PBT/PP (52)
          • Technical Compounds (154)
        • PUR (54)
        • Other (483)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (123)
          • Biopolymers (157)
          • Elastomers/TPE (89)
          • Recyclate (4)
      • Other (25)
    • Machinery (86)
      • Extrusion (19)
        • General (8)
        • Flexible Films (4)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (251)
      • Polymer Materials (89)
      • Technical (10)
      • Product Development (27)
      • Process (57)
      • Application (49)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (17)
    • New Products (547)
      • Packaging (340)
      • Construction (26)
      • Automotive / Transport (71)
      • Electrical Appliances (21)
      • Consumer Goods (31)
      • Medical (27)
      • Technical (7)
      • Other (24)
    • Other (25)
  • Management (166)
    • Purchasing (25)
    • General Management (50)
    • Company organisation (37)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (36)
    • Logistics (7)
  • People (1.257)
  • Industry (2.974)
    • General (677)
    • Associations/Institutions (1.264)
    • Legislation (653)
    • Environment / Health (370)
    • plas.TV - Plastics unite(d) (10)
  • Events (981)
  • Plastic Fantastic (356)
  • Commentaries (52)
  • Interviews (61)
  • Notes by Publisher (28)
© 2022 by Plastics Information Europe, Bad Homburg
Date of print: 17/05/2022
Ref: s2533o45fonyln45zkuukr55
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_233890&node=100359