Show topic list

Commentaries

EDITORIAL The writing is on the wall	28.05.2025
EDITORIAL Final act for Italy's petrochemical industry	26.05.2025
EDITORIAL Silence is agreement: Why the plastics industry should speak up	22.04.2025
UPDATE - EDITORIAL A fresh start in Amsterdam: what the European recycling industry hopes to gain from PRSE – Vincent Breit	31.03.2025
EDITORIAL After a political earthquake, the plastics industry sits somewhere between relief and trepidation	08.11.2024
EDITORIAL Caution: Risk of strangulation! Why plastics processors need more effective representation of their interests	01.07.2024
EDITORIAL "Woe is me! The cap is hanging from the bottleneck!"	20.06.2024
EDITORIAL In between ambitious and absurd: Sibur's change in strategy	03.04.2024
EDITORIAL A clear position is not an end in itself: the plastics industry must also take a firm stand	26.01.2024
EDITORIAL Who gives a hoot about climate? / UN conference without, then with fossil fuel phase-out	19.12.2023
OPINION "It's about more than just PET," says Daniel Stricker	01.12.2023
FAKUMA Talks among the like-minded in days of crisis / A look back at the industry event in Germany	25.10.2023
EDITORIAL Are we even ready to eliminate single-use plastics?	29.09.2023
COMMENT Greed isn't cool: Why the plastics industry should be careful not to stifle the budding economy	17.08.2023
EDITORIAL Viessmann deal sends warning signal to German plastics converters	02.05.2023
EDITORIAL Of red lines and crossing them	01.03.2023
COMMENT PRE president Ton Emans reacts to MEPs' vote in favour of tighter waste shipment rules: “Plastics waste exports stop a key measure to keep valuable resources in the EU”	07.02.2023
EDITORIAL A lot of zeros, but not much behind them – why the announcements of polymer corporations must be put into perspective	27.01.2023
CIRCULAR ECONOMY “The plastics industry faces a decisive year in 2023”: Comment by Ingemar Bühler of Plastics Europe Deutschland	12.12.2022
EDITORIAL Is Germany's proposed law to fund SUP recovery a long overdue move or a bureaucratic monster?	17.11.2022
EDITORIAL The pivotal quarter ahead	22.09.2022
COMMENT Chemical recycling: Not nearly enough hype / Why all recycling processes are important for a circular economy / A reply from Ingemar Bühler, managing director of Plastics Europe Deutschland	07.06.2022
EDITORIAL The perversity of war: Russia's billion-dollar export surplus	19.05.2022
PLASTICS MARKETS “If we comply with this dictated system, there will only be losers in the medium term – because with no market there is no profit” / Letter from a group of plastics processors to their own industry	05.05.2022
EDITORIAL We didn't start the fire …	21.03.2022

Seite 1 von 4

Topic search

Plastics Information Europe

Polymer Prices (6.053)
- Petrochemicals (488)
- Standard Thermoplastics (963)
- PET (249)
- Engineering Thermoplastics (256)
- Recyclate (370)
  - General (3)
  - Standard Thermoplastics / Recyclate (183)
  - Engineering Thermoplastics / Recyclate (184)
- Polyurethanes (247)
- High Performance Polymers (2)
- Composites (183)
- Announcements (2.575)
- World Regions (583)
  - China (292)
    - Standard Thermoplastics (147)
    - Engineering Thermoplastics (145)
  - North America (167)
  - Russia (124)
- Spot Prices (125)
- Forecasts (12)
Companies (34.503)
- Polymer Materials (17.042)
  - Petrochemicals (3.072)
  - Charge (1.849)
    - General (89)
    - Masterbatches (339)
    - Additives (774)
    - Colours (379)
    - Reinforcements/Fillers (268)
  - Polymers (10.955)
    - General (711)
    - Standard Thermoplastics (3.794)
      - General (113)
      - Polyolefins (1.930)
      - Polystyrenes (335)
      - PVC (662)
      - Polyester (558)
      - Expandable (PS, PP, PE) (196)
    - Technical Thermoplastics (3.231)
      - General (349)
      - Styrene Copolymers (259)
      - PC/PMMA (458)
      - Polyamides (895)
      - POM/PBT/PP (315)
      - Technical Compounds (955)
    - PUR (781)
    - Other (2.438)
      - General (101)
      - Composites/Thermosets (406)
      - High Performance (608)
      - Biopolymers (697)
      - Elastomers/TPE (368)
      - Recyclate (258)
  - Distribution (1.166)
- Machinery (1.086)
  - General (28)
  - Plant Construction (139)
  - Core Machines (740)
    - General (89)
    - Extrusion (180)
    - Injection Moulding (368)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (174)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (93)
    - Components (13)
  - Finishing (5)
- Processing (7.109)
  - General (892)
  - Extrusion (2.333)
    - General (119)
    - Flexible Films (1.127)
    - Rigid Films/Sheet (378)
    - Pipes (349)
    - Profiles/Rods (257)
    - Other (103)
  - Injection Moulding (1.710)
  - Blow Moulding (510)
  - PUR (305)
  - Other (1.121)
    - General (120)
    - Foam (305)
    - Composites/Thermosets (350)
    - Thermoforming (217)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (238)
- Application (7.295)
  - General (128)
  - Packaging (3.152)
  - Construction (720)
  - Automotive / Transport (1.671)
  - Electrical Appliances (335)
  - Consumer Goods (679)
  - Medical (397)
  - Technical (213)
- Other (1.971)
  - Recycling/Disposal (1.585)
  - Services (253)
  - Logistics (133)
Commercial Register (122)
- Insolvency (117)
- Changes (5)
Markets (23.269)
- Polymer Materials (10.062)
  - Petrochemicals (2.471)
  - Charge (855)
    - General (38)
    - Masterbatches (94)
    - Additives (338)
    - Colours (156)
    - Reinforcements/Fillers (229)
  - Polymers (6.353)
    - General (787)
    - Standard Thermoplastics (2.428)
      - General (74)
      - Polyolefins (1.209)
      - Polystyrenes (157)
      - PVC (502)
      - Polyester (346)
      - Expandable (PS, PP, PE) (140)
    - Technical Thermoplastics (1.276)
      - General (87)
      - Styrene Copolymers (105)
      - PC/PMMA (151)
      - Polyamides (438)
      - POM/PBT/PP (110)
      - Technical Compounds (385)
    - PUR (453)
    - Other (1.409)
      - General (47)
      - Composites/Thermosets (292)
      - High Performance (302)
      - Biopolymers (431)
      - Elastomers/TPE (141)
      - Recyclate (196)
  - Other Materials (59)
  - Distribution (324)
- Machinery (507)
  - General (129)
  - Plant Construction (14)
  - Core Machines (293)
    - General (111)
    - Extrusion (37)
    - Injection Moulding (124)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.691)
  - General (430)
  - Extrusion (608)
    - General (20)
    - Flexible Films (297)
    - Rigid Films/Sheets (119)
    - Pipes (72)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (178)
  - Blow Moulding (43)
  - PUR (81)
  - Other (306)
    - General (20)
    - Foam (79)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.086)
  - General (42)
  - Packaging (1.977)
  - Construction (311)
  - Automotive / Transport (968)
  - Electrical Appliances (219)
  - Consumer Goods (254)
  - Medical (205)
  - Technical (60)
  - Other (50)
- Regions and Countries (4.094)
  - World (195)
  - German-speaking Countries (484)
  - Europe (1.985)
    - General (480)
    - Italy (142)
    - France (155)
    - Spain/Portugal (100)
    - Great Britain/Ireland (507)
    - Low Countries (74)
    - Central Europe (177)
    - Scandinavia (46)
    - Russia (110)
    - Eastern Europe (53)
    - Southeastern Europe (141)
  - North America (489)
  - Asia (678)
    - General (122)
    - China (392)
    - Japan (51)
    - Korea (26)
    - India (87)
  - Middle East (143)
  - Other (39)
  - South America (81)
- Other (2.829)
  - Recycling/Disposal (2.056)
  - Economic Trend (426)
  - Services (41)
  - Logistics (234)
  - Energy (72)
Production and Engineering (3.770)
- Polymer Materials (2.350)
  - Petrochemicals (60)
  - Charge (439)
    - General (14)
    - Masterbatches (111)
    - Additives (226)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.820)
    - General (30)
    - Standard Themoplastics (362)
    - Technical Thermoplastics (600)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (205)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (72)
    - Other (756)
      - General (21)
      - Composites/Thermosets (107)
      - High Performance (160)
      - Biopolymers (245)
      - Elastomers/TPE (114)
      - Recyclate (109)
  - Other (31)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (431)
  - Polymer Materials (144)
  - Technical (13)
  - Product Development (41)
  - Process (82)
  - Application (90)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (57)
- New Products (856)
  - Packaging (565)
  - Construction (35)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (38)
- Other (39)
Management (713)
- Purchasing (103)
- General Management (159)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (96)
- Logistics (289)
People (1.496)
Industry (6.117)
- General (1.205)
- Associations/Institutions (2.341)
- Legislation (1.315)
- Environment / Health (1.246)
- plas.TV - Plastics unite(d) (10)
Events (1.146)
Plastic Fantastic (548)
Commentaries (82)
Interviews (141)
Notes by Publisher (72)