www.pieweb.com

Markets Other Recycling/Disposal

SPAIN
DRS for plastic bottles to be introduced by 2026 / Alternative system well short of target / Environmentalists praise long-awaited step
02.12.2024
AGRICULTURAL PLASTICS
Recycling infrastructure to include drip hoses, seed bags / Erde cooperation in Germany and Spain
02.12.2024
EXXONMOBIL
Large-scale expansion of chemical recycling capacity / Cyclyx Circularity Centres progressing
02.12.2024
PLASTIC PACKAGING
Future Resources Congress: Challenges resulting from PPWR for recyclate use, recyclability / European Packaging Register Network established
29.11.2024
PACKAGING EUROPE
PPWR corrigendum officially approved by MEPs / Regulation expected to enter into force at start of 2025
28.11.2024
WINTER SPORTS
Recycling initiative in Austria / Wintrust project aims to recover ski equipment
28.11.2024
PLASTIC BAGS
Almost 5 bn fewer bags in circulation in Europe / Highest use in Baltic states – Eurostat
27.11.2024
EUROPEAN PLASTICS INDUSTRY
Cheap polymer imports threaten circular economy ambitions / Share of global plastics production continues to slide – Plastics Europe report
25.11.2024
PLASTIC FANTASTIC
Recycling goes viral in Colombia
22.11.2024
WASTE EXPORTS
UK shipments to Turkey on the rise again / 60% increase between 2022 and 2023 – Greenpeace
20.11.2024
QC POLYMER
UK recycler robbed of equipment on eve of creditor's auction / Police launch probe
19.11.2024
CHEMICAL RECYCLING
Neste, Alterra, Technip to offer modular solutions for plants / Lower costs, higher efficiency touted
18.11.2024
DOW
Partnership with Ambipar to boost PE recycling in Brazil / Focus on transforming post-consumer waste into new products
18.11.2024
MEDICAL PACKAGING
European Council of Vinyl Manufacturers announces initiative to recycle pharmaceutical blister packs
13.11.2024
CHEMICAL RECYCLING
UK government accepts use of mass balance to verify chemically recycled plastics for packaging tax / EU member states show support, EC mulls it over
12.11.2024
POLAND
DRS introduction postponed to October 2025 / Operators voice discontent with decision
12.11.2024
REVALYU
German recycler significantly expands site for chemical PET recycling in India
12.11.2024
AZERBAIJAN
Joint venture kicks off plastics waste processing into pyrolysis oil / Export likely cornerstone of project
11.11.2024
PACKAGING GERMANY
German federal environment agency considers special levy on dairy-product packaging / Decision receives harsh criticism from associations
11.11.2024
UPDATE - RECYCLING UK
Waste management group Viridor to shutter mechanical recycling plant in Avonmouth / PET bottle recycler QC Polymer insolvent
07.11.2024
ALTERRA ENERGY
Industry giants invest to accelerate commercialisation of chemical recycling process / Aim to deploy technology globally
06.11.2024
PACKAGING UK
Government urged to help reduce packaging use, facilitate recycling / LGA calls for review of moves to cut EPR fees
05.11.2024
CZECH REPUBLIC
DRS for PET bottles, metal cans gets government go-ahead
31.10.2024
PACKAGING WASTE
Eurostat data shows volumes in Europe barely decreasing year-on-year / Less than half recycled
30.10.2024
RECYCLABLE WASTE EXPORT
Ten-year trend shows huge drop in EU export volumes, values / Bloc remains net seller of recyclable plastics in 2023
24.10.2024
Seite 1 von 77
Topic search
Plastics Information Europe
  • Polymer Prices (5.846)
    • Petrochemicals (427)
    • Standard Thermoplastics (920)
    • PET (241)
    • Engineering Thermoplastics (247)
    • Recyclate (353)
      • Standard Thermoplastics / Recyclate (176)
      • Engineering Thermoplastics / Recyclate (177)
    • Polyurethanes (239)
    • High Performance Polymers (2)
    • Composites (175)
    • Announcements (2.558)
    • World Regions (562)
      • China (278)
        • Standard Thermoplastics (140)
        • Engineering Thermoplastics (138)
      • North America (160)
      • Russia (124)
    • Spot Prices (118)
    • Forecasts (4)
  • Companies (33.271)
    • Polymer Materials (16.488)
      • Petrochemicals (2.959)
      • Charge (1.799)
        • General (89)
        • Masterbatches (332)
        • Additives (750)
        • Colours (367)
        • Reinforcements/Fillers (261)
      • Polymers (10.597)
        • General (673)
        • Standard Thermoplastics (3.669)
          • General (113)
          • Polyolefins (1.860)
          • Polystyrenes (323)
          • PVC (642)
          • Polyester (544)
          • Expandable (PS, PP, PE) (187)
        • Technical Thermoplastics (3.130)
          • General (348)
          • Styrene Copolymers (251)
          • PC/PMMA (442)
          • Polyamides (861)
          • POM/PBT/PP (305)
          • Technical Compounds (923)
        • PUR (765)
        • Other (2.360)
          • General (100)
          • Composites/Thermosets (399)
          • High Performance (589)
          • Biopolymers (681)
          • Elastomers/TPE (357)
          • Recyclate (234)
      • Distribution (1.133)
    • Machinery (1.065)
      • General (27)
      • Plant Construction (130)
      • Core Machines (731)
        • General (88)
        • Extrusion (176)
        • Injection Moulding (364)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (173)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.867)
      • General (858)
      • Extrusion (2.263)
        • General (112)
        • Flexible Films (1.091)
        • Rigid Films/Sheet (368)
        • Pipes (340)
        • Profiles/Rods (255)
        • Other (97)
      • Injection Moulding (1.648)
      • Blow Moulding (492)
      • PUR (287)
      • Other (1.086)
        • General (114)
        • Foam (302)
        • Composites/Thermosets (336)
        • Thermoforming (209)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (233)
    • Application (7.036)
      • General (125)
      • Packaging (3.037)
      • Construction (697)
      • Automotive / Transport (1.615)
      • Electrical Appliances (326)
      • Consumer Goods (653)
      • Medical (379)
      • Technical (204)
    • Other (1.815)
      • Recycling/Disposal (1.466)
      • Services (248)
      • Logistics (101)
  • Commercial Register (111)
    • Insolvency (106)
    • Changes (5)
  • Markets (22.258)
    • Polymer Materials (9.651)
      • Petrochemicals (2.346)
      • Charge (834)
        • General (38)
        • Masterbatches (90)
        • Additives (331)
        • Colours (153)
        • Reinforcements/Fillers (222)
      • Polymers (6.106)
        • General (720)
        • Standard Thermoplastics (2.346)
          • General (74)
          • Polyolefins (1.160)
          • Polystyrenes (154)
          • PVC (486)
          • Polyester (337)
          • Expandable (PS, PP, PE) (135)
        • Technical Thermoplastics (1.235)
          • General (87)
          • Styrene Copolymers (101)
          • PC/PMMA (146)
          • Polyamides (420)
          • POM/PBT/PP (106)
          • Technical Compounds (375)
        • PUR (444)
        • Other (1.361)
          • General (46)
          • Composites/Thermosets (287)
          • High Performance (293)
          • Biopolymers (421)
          • Elastomers/TPE (137)
          • Recyclate (177)
      • Other Materials (57)
      • Distribution (308)
    • Machinery (501)
      • General (127)
      • Plant Construction (14)
      • Core Machines (289)
        • General (109)
        • Extrusion (36)
        • Injection Moulding (123)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.641)
      • General (404)
      • Extrusion (597)
        • General (20)
        • Flexible Films (291)
        • Rigid Films/Sheets (116)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (177)
      • Blow Moulding (43)
      • PUR (77)
      • Other (299)
        • General (20)
        • Foam (77)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.903)
      • General (37)
      • Packaging (1.881)
      • Construction (297)
      • Automotive / Transport (932)
      • Electrical Appliances (212)
      • Consumer Goods (243)
      • Medical (198)
      • Technical (56)
      • Other (47)
    • Regions and Countries (4.017)
      • World (194)
      • German-speaking Countries (472)
      • Europe (1.944)
        • General (464)
        • Italy (142)
        • France (155)
        • Spain/Portugal (97)
        • Great Britain/Ireland (502)
        • Low Countries (74)
        • Central Europe (173)
        • Scandinavia (44)
        • Russia (107)
        • Eastern Europe (46)
        • Southeastern Europe (140)
      • North America (481)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (141)
      • Other (37)
      • South America (81)
    • Other (2.545)
      • Recycling/Disposal (1.905)
      • Economic Trend (343)
      • Services (41)
      • Logistics (202)
      • Energy (54)
  • Production and Engineering (3.705)
    • Polymer Materials (2.313)
      • Petrochemicals (55)
      • Charge (436)
        • General (14)
        • Masterbatches (111)
        • Additives (223)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.792)
        • General (30)
        • Standard Themoplastics (356)
        • Technical Thermoplastics (593)
          • General (19)
          • Styrene Copolymers (62)
          • PC/PMMA (62)
          • Polyamides (203)
          • POM/PBT/PP (67)
          • Technical Compounds (180)
        • PUR (71)
        • Other (742)
          • General (21)
          • Composites/Thermosets (107)
          • High Performance (159)
          • Biopolymers (240)
          • Elastomers/TPE (113)
          • Recyclate (102)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (421)
      • Polymer Materials (140)
      • Technical (13)
      • Product Development (40)
      • Process (81)
      • Application (89)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (54)
    • New Products (839)
      • Packaging (549)
      • Construction (34)
      • Automotive / Transport (99)
      • Electrical Appliances (26)
      • Consumer Goods (49)
      • Medical (37)
      • Technical (7)
      • Other (38)
    • Other (38)
  • Management (636)
    • Purchasing (100)
    • General Management (137)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (88)
    • Logistics (247)
  • People (1.474)
  • Industry (5.739)
    • General (1.136)
    • Associations/Institutions (2.211)
    • Legislation (1.210)
    • Environment / Health (1.172)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.121)
  • Plastic Fantastic (522)
  • Commentaries (78)
  • Interviews (131)
  • Notes by Publisher (69)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 02/12/2024
Ref: le0q2e45irh1kzqszwpgs155
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_202405&node=100277