www.pieweb.com
Strengthen your position in business negotiations!
  • European market reports for standard and engineering,
    thermoplastics, polyurethanes, recyclate, composites/GRP,
    feedstocks – more than 100 grades of polymer covered.
  • MyPrices – individually configured reports and e-mail alerts
  • Comparative and analytical tools

Polymer Prices Recyclate Engineering Thermoplastics / Recyclate

POLYMER PRICES
Engineering recyclate March 2020: Reductions only for recycled polyamide 6.6 GF and polycarbonate / Supply plentiful / Wide-ranging price cuts expected in April / Fall in virgin material prices and coronavirus-related slump in demand
19.03.2020
POLYMER PRICES
Engineering Recyclate February 2020: Recycled ABS, PA and PC see a few price cuts / Weak demand slows business considerably / Coronavirus delays mould supplies from China
19.02.2020
POLYMER PRICES
Engineering Recyclate January 2020: Poor demand leads to rollovers everywhere / Prices may have bottomed out in many cases / PA 6.6 recyclate unlikely to escape reductions
21.01.2020
POLYMER PRICES
Engineering Recyclate December 2019: Prices down for nearly all regrind types / Significantly weaker demand at year-end / Nevertheless surprisingly strong order-book situation for January and February
19.12.2019
POLYMER PRICES
Engineering Recyclate November 2019: Notations unchanged with an uninspiring month / Demand picks up only slightly / Pressure from primary sector continues
20.11.2019
POLYMER PRICES
Engineering Recyclate October 2019: Prices roll over / Demand very weak for the time of year / Many recyclate producers have their backs to the wall / Gap between primary and secondary PA is too small
18.10.2019
POLYMER PRICES
Engineering Recyclate September 2019: First price cuts in mid-month / Order activity expected to remain slow in October / Price cuts likely to spread
19.09.2019
POLYMER PRICES
Engineering Recyclate August 2019: Only a few minor price reductions / Rollover predicted across the board in September
20.08.2019
POLYMER PRICES
Engineering Recyclate July 2019: Notations give way across the board / Only recycled polyamide 6.6 and certain rPOM and rPC grades escaping downtrend / Decline set to affect all materials in August
19.07.2019
POLYMER PRICES
Engineering Recyclate June 2019: Minor corrections with ABS and polycarbonate / Sluggish demand in automotive segment / Overall demand for regrind material nevertheless good / Price cuts likely with PA and PP compounds
20.06.2019
POLYMER PRICES
Engineering Recyclate May 2019: Secondary market quiet / Recycled PP compounds an exception / Demand improves slowly / Little change likely in June
20.05.2019
POLYMER PRICES
Engineering Recyclate April 2019: Notations largely stabilise / Only occasional softening with rPA 6 and rPC / Little change expected in May
18.04.2019
POLYMER PRICES
Engineering Recyclate March 2019: Weak volume calls from automotive industry depress prices / Some further discounts in April
20.03.2019
POLYMER PRICES
Engineering Recyclate February 2019: Most prices roll over as expected / Little movement likely in March / Demand picking up / Reasonable supply of base material and situation easing with PA 6.6
20.02.2019
POLYMER PRICES
Engineering Recyclate January 2019: Rollover for all types / Prices unlikely to move much until Q2 / Surprisingly strong automotive demand / Situation with base material eases
21.01.2019
POLYMER PRICES
Engineering Recyclate December 2018: Significant reductions with some regrind types / PA 6.6 feedstocks still short and expensive / Demand far weaker than in previous years / Automotive segment continues tending weak
20.12.2018
POLYMER PRICES
Engineering Recyclate November 2018: Weak demand from automotive industry erodes prices for rABS, rPC and rPP compounds / Primary market fuels strong rPA 6.6 increase / Demand remains below expectations
21.11.2018
POLYMER PRICES
Engineering Recyclate October 2018: Rollovers dominate / Production largely running normally / Demand weakens / More movement expected next month
19.10.2018
POLYMER PRICES
Engineering Recyclate September 2018: General rollover in September / Upcoming hikes for polyamides set to also push up recyclates / Strong production month expected
21.09.2018
POLYMER PRICES
Engineering Recyclate August 2018: General uptrend loses momentum / Some notations slightly up, others take a breather / Holiday season puts damper on demand
21.08.2018
POLYMER PRICES
Engineering Recyclate July 2018: Primary product increases roll through secondary market / Large hikes for rPA 6.6 and rPC / Brisk demand continues / Varying trends in August
19.07.2018
POLYMER PRICES
Engineering Recyclate June 2018: Bottleneck for rPA 6.6 dogs market / Dramatic hikes / rPC consistently tight / Demand still lively / More increases sure to come in July
20.06.2018
POLYMER PRICES
Engineering Recyclate May 2018: All is still calm / rPC tends upwards / Demand reasonable despite many bank holidays / Prices expected to rise especially for rPA types and rPC / Base polymer often tight
18.05.2018
POLYMER PRICES
Engineering Recyclate April 2018: Little change this month / Upturn probable in coming weeks / Demand quite reasonable of late / Still minor delivery delays
20.04.2018
POLYMER PRICES
Engineering Recyclate March 2018: Respite for price rises / rPA 6.6 and rPOM nevertheless on the up / rABS and rPA 6 rather quiet / rPC awaits next surge
19.03.2018
Seite 1 von 5
Topic search
Plastics Information Europe
  • Polymer Prices (4.398)
    • Petrochemicals (215)
    • Standard Thermoplastics (630)
    • PET (185)
    • Engineering Thermoplastics (190)
    • Recyclate (241)
      • Standard Thermoplastics / Recyclate (120)
      • Engineering Thermoplastics / Recyclate (121)
    • Polyurethanes (183)
    • High Performance Polymers (2)
    • Composites (119)
    • Announcements (2.204)
    • World Regions (369)
      • China (166)
        • Standard Thermoplastics (84)
        • Engineering Thermoplastics (82)
      • North America (104)
      • Russia (99)
    • Spot Prices (60)
  • Companies (23.588)
    • Polymer Materials (11.601)
      • Petrochemicals (2.046)
      • Charge (1.414)
        • General (63)
        • Masterbatches (276)
        • Additives (572)
        • Colours (277)
        • Reinforcements/Fillers (226)
      • Polymers (7.263)
        • General (399)
        • Standard Thermoplastics (2.607)
          • General (88)
          • Polyolefins (1.278)
          • Polystyrenes (215)
          • PVC (490)
          • Polyester (391)
          • Expandable (PS, PP, PE) (145)
        • Technical Thermoplastics (2.148)
          • General (290)
          • Styrene Copolymers (165)
          • PC/PMMA (278)
          • Polyamides (559)
          • POM/PBT/PP (194)
          • Technical Compounds (662)
        • PUR (528)
        • Other (1.581)
          • General (78)
          • Composites/Thermosets (322)
          • High Performance (407)
          • Biopolymers (480)
          • Elastomers/TPE (249)
          • Rezyklate (45)
      • Distribution (878)
    • Machinery (941)
      • General (20)
      • Plant Construction (103)
      • Core Machines (656)
        • General (74)
        • Extrusion (158)
        • Injection Moulding (330)
        • Blow Moulding (64)
        • Foam (10)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (158)
        • General (26)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (86)
        • Components (13)
      • Finishing (4)
    • Processing (5.336)
      • General (671)
      • Extrusion (1.757)
        • General (83)
        • Flexible Films (826)
        • Rigid Films/Sheet (294)
        • Pipes (273)
        • Profiles/Rods (209)
        • Other (72)
      • Injection Moulding (1.278)
      • Blow Moulding (379)
      • PUR (205)
      • Other (854)
        • General (92)
        • Foam (231)
        • Composites/Thermosets (289)
        • Thermoforming (162)
        • Rotational Moulding (24)
        • Additive Manufacturing (56)
      • Finishing (192)
    • Application (4.987)
      • General (87)
      • Packaging (2.066)
      • Construction (517)
      • Automotive / Transport (1.225)
      • Electrical Appliances (257)
      • Consumer Goods (412)
      • Medical (283)
      • Technical (140)
    • Other (723)
      • Recycling/Disposal (567)
      • Services (156)
  • Commercial Register (66)
    • Insolvency (61)
    • Changes (5)
  • Markets (15.071)
    • Polymer Materials (6.517)
      • Petrochemicals (1.543)
      • Charge (655)
        • General (32)
        • Masterbatches (77)
        • Additives (248)
        • Colours (108)
        • Reinforcements/Fillers (190)
      • Polymers (4.119)
        • General (325)
        • Standard Thermoplastics (1.738)
          • General (47)
          • Polyolefins (854)
          • Polystyrenes (108)
          • PVC (365)
          • Polyester (252)
          • Expandable (PS, PP, PE) (112)
        • Technical Thermoplastics (837)
          • General (74)
          • Styrene Copolymers (58)
          • PC/PMMA (106)
          • Polyamides (283)
          • POM/PBT/PP (67)
          • Technical Compounds (249)
        • PUR (313)
        • Other (906)
          • General (31)
          • Composites/Thermosets (232)
          • High Performance (224)
          • Biopolymers (294)
          • Elastomers/TPE (99)
          • Recyclate (26)
      • Other Materials (12)
      • Distribution (188)
    • Machinery (438)
      • General (110)
      • Plant Construction (12)
      • Core Machines (248)
        • General (87)
        • Extrusion (32)
        • Injection Moulding (108)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.332)
      • General (286)
      • Extrusion (494)
        • General (18)
        • Flexible Films (234)
        • Rigid Films/Sheets (96)
        • Pipes (64)
        • Profiles/Rods (75)
        • Other (7)
      • Injection Moulding (170)
      • Blow Moulding (36)
      • PUR (58)
      • Other (246)
        • General (18)
        • Foam (54)
        • Composites/Thermosets (127)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (19)
      • Finishing (42)
    • Applications (2.459)
      • General (19)
      • Packaging (1.050)
      • Construction (216)
      • Automotive / Transport (687)
      • Electrical Appliances (172)
      • Consumer Goods (132)
      • Medical (118)
      • Technical (40)
      • Other (25)
    • Regions and Countries (3.492)
      • World (170)
      • German-speaking Countries (392)
      • Europe (1.696)
        • General (382)
        • Italy (128)
        • France (151)
        • Spain/Portugal (75)
        • Great Britain/Ireland (452)
        • Low Countries (73)
        • Central Europe (166)
        • Scandinavia (41)
        • Russia (83)
        • Eastern Europe (37)
        • Southeastern Europe (108)
      • North America (400)
      • Asia (590)
        • General (103)
        • China (340)
        • Japan (47)
        • Korea (24)
        • India (76)
      • Middle East (134)
      • Other (34)
      • South America (76)
    • Other (833)
      • Recycling/Disposal (753)
      • Economic Trend (53)
      • Services (27)
  • Production and Engineering (2.539)
    • Polymer Materials (1.644)
      • Petrochemicals (26)
      • Charge (335)
        • General (12)
        • Masterbatches (76)
        • Additives (174)
        • Colours (38)
        • Reinforcements/Fillers (35)
      • Polymers (1.258)
        • General (15)
        • Standard Themoplastics (244)
        • Technical Thermoplastics (473)
          • General (17)
          • Styrene Copolymers (44)
          • PC/PMMA (48)
          • Polyamides (161)
          • POM/PBT/PP (52)
          • Technical Compounds (151)
        • PUR (54)
        • Other (472)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (121)
          • Biopolymers (153)
          • Elastomers/TPE (87)
          • Recyclate (1)
      • Other (25)
    • Machinery (83)
      • Extrusion (17)
        • General (7)
        • Flexible Films (4)
        • Calender (3)
        • Pipes/Profiles (3)
      • Injection Moulding (30)
        • General (14)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (246)
      • Polymer Materials (89)
      • Technical (10)
      • Product Development (27)
      • Process (56)
      • Application (47)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (15)
    • New Products (541)
      • Packaging (334)
      • Construction (26)
      • Automotive / Transport (71)
      • Electrical Appliances (21)
      • Consumer Goods (32)
      • Medical (27)
      • Technical (7)
      • Other (23)
    • Other (25)
  • Management (148)
    • Purchasing (23)
    • General Management (44)
    • Company organisation (35)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (34)
    • Logistics (1)
  • People (1.239)
  • Industry (2.858)
    • General (665)
    • Associations/Institutions (1.212)
    • Legislation (629)
    • Environment / Health (352)
  • Events (959)
  • Plastic Fantastic (351)
  • Commentaries (51)
  • Interviews (60)
  • Notes by Publisher (27)
© 2020 by Plastics Information Europe, Bad Homburg
Date of print: 07/04/2020
Ref: tw1ycxexlopo4abv41uwwq45
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=article&node=100074