Show topic list

Polymer Prices World Regions Russia

EDITORIAL The perversity of war: Russia's billion-dollar export surplus	19.05.2022
POLYMER PRICES Russia February 2022: Inconsistent price development in February / PS significantly more expensive / Some strong price hikes seen from early of March / Imports initially suspended at beginning of month	01.03.2022
POLYMER PRICES Russia January 2022: Price reductions for almost all grades / Only PET defies trend / Fall of rouble puts additional pressure on euro quotations	10.02.2022
POLYMER PRICES Russia December 2021: Prices of standard thermoplastics decline / Only PVC, PET dearer / Trends set to continue over next few weeks	12.01.2022
POLYMER PRICES Russia November 2021: Most prices rise only moderately / PS, PET up sharply / High prices hurt domestic demand / Few imports	07.12.2021
POLYMER PRICES Russia October 2021: Maintenance, lack of imports spur prices / HDPE sees highest increase / Trends set to continue over next few weeks	03.11.2021
POLYMER PRICES Russia September 2021: Increases in all segments / Maintenance, lack of imports spur rises / Stagnating to higher prices expected in October	08.10.2021
POLYMER PRICES Russia August 2021: Premiums dominate the picture in August / PVC sets record / Maintenance and outages cause shortages in polyolefins / Further increases expected in September	10.09.2021
POLYMER PRICES Russia July 2021: PVC, EPS and PET more expensive again / Polyolefins and polystyrene fall sharply in some cases / High demand from construction and packaging / Trends set to continue over next few weeks	04.08.2021
POLYMER PRICES Russia June 2021: Reductions for almost all standard thermoplastics / Only PVC still moving upward	06.07.2021
POLYMER PRICES Russia May 2021: Plateauing predominates / Notations falling for the first time / Supply bottleneck driving PVC further up / Overall demand average / Supply situation with thin imports in most cases	04.06.2021
POLYMER PRICES Russia April 2021: Clear upward trend for most types / Polystyrene at record high / Demand uneven in overall terms / Stagnating prices expected in May	10.05.2021
POLYMER PRICES Russia March 2021: Notations at an all-time high / Polystyrene top of the list / Clearly felt bottlenecks set to fuel the upward trend in April	08.04.2021
POLYMER PRICES Russia February 2021: Notations explode in all key segments	12.03.2021
POLYMER PRICES Russia January 2021: Price increases in all segments / Highest rises for PVC and PET / Clearly noticeable bottlenecks in places set to fuel upward trend even further in February	09.02.2021
POLYMER PRICES Russia December 2020: Notations rise for almost all polymer types / Domestic prices at export level / Further increases likely for January	08.01.2021
POLYMER PRICES Russia November 2020: Increases for all polymer types / Ethylene shortage causing isolated supply bottlenecks / Exports increasing / Further price rises likely in December	08.12.2020
POLYMER PRICES Russia October 2020: Some LDPE and HDPE materials show significant reductions / Global PVC supply bottlenecks lift prices / Trends expected to continue in November	10.11.2020
POLYMER PRICES Russia September 2020: Price increases across all segments / Record notations for polystyrene	09.10.2020
POLYMER PRICES Russia August 2020: Polyethylene availability very low / Simultaneous outages and maintenance on plants at four producers / Notations set to continue upward trend in September	10.09.2020
POLYMER PRICES Russia July 2020: Notations rising in all segments / Only PET with notable reductions still	10.08.2020
POLYMER PRICES Russia June 2020: Notations rise moderately for PE, PP and PVC / PET grades at record low due to continued restrictions / Price increases for PVC expected in July	09.07.2020
POLYMER PRICES Russia May 2020: Marked reductions in all segments / LDPE and PVC hardest hit / Price increases not in sight as yet / End of PET downtrend in June will depend on weather	12.06.2020
POLYMER PRICES Russia April 2020: Notations fall noticeably / PVC moving upward / Virus pandemic shuts down refineries and production lines / Frequent supply overhangs despite shutdowns	15.05.2020
POLYMER PRICES Russia March 2020: Prices pick up for almost all polymers / Normal demand for the season / Supply mostly secure / Cheap Chinese imports scarce	16.04.2020

Seite 1 von 5

Topic search

Plastics Information Europe

Polymer Prices (5.851)
- Petrochemicals (430)
- Standard Thermoplastics (921)
- PET (242)
- Engineering Thermoplastics (247)
- Recyclate (353)
  - Standard Thermoplastics / Recyclate (176)
  - Engineering Thermoplastics / Recyclate (177)
- Polyurethanes (239)
- High Performance Polymers (2)
- Composites (175)
- Announcements (2.558)
- World Regions (562)
  - China (278)
    - Standard Thermoplastics (140)
    - Engineering Thermoplastics (138)
  - North America (160)
  - Russia (124)
- Spot Prices (118)
- Forecasts (4)
Companies (33.276)
- Polymer Materials (16.492)
  - Petrochemicals (2.960)
  - Charge (1.800)
    - General (89)
    - Masterbatches (332)
    - Additives (751)
    - Colours (367)
    - Reinforcements/Fillers (261)
  - Polymers (10.598)
    - General (673)
    - Standard Thermoplastics (3.669)
      - General (113)
      - Polyolefins (1.860)
      - Polystyrenes (323)
      - PVC (642)
      - Polyester (544)
      - Expandable (PS, PP, PE) (187)
    - Technical Thermoplastics (3.131)
      - General (348)
      - Styrene Copolymers (251)
      - PC/PMMA (442)
      - Polyamides (862)
      - POM/PBT/PP (305)
      - Technical Compounds (923)
    - PUR (765)
    - Other (2.360)
      - General (100)
      - Composites/Thermosets (399)
      - High Performance (589)
      - Biopolymers (681)
      - Elastomers/TPE (357)
      - Recyclate (234)
  - Distribution (1.134)
- Machinery (1.065)
  - General (27)
  - Plant Construction (130)
  - Core Machines (731)
    - General (88)
    - Extrusion (176)
    - Injection Moulding (364)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (173)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.867)
  - General (858)
  - Extrusion (2.263)
    - General (112)
    - Flexible Films (1.091)
    - Rigid Films/Sheet (368)
    - Pipes (340)
    - Profiles/Rods (255)
    - Other (97)
  - Injection Moulding (1.648)
  - Blow Moulding (492)
  - PUR (287)
  - Other (1.086)
    - General (114)
    - Foam (302)
    - Composites/Thermosets (336)
    - Thermoforming (209)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (233)
- Application (7.036)
  - General (125)
  - Packaging (3.037)
  - Construction (697)
  - Automotive / Transport (1.615)
  - Electrical Appliances (326)
  - Consumer Goods (653)
  - Medical (379)
  - Technical (204)
- Other (1.816)
  - Recycling/Disposal (1.467)
  - Services (248)
  - Logistics (101)
Commercial Register (111)
- Insolvency (106)
- Changes (5)
Markets (22.268)
- Polymer Materials (9.655)
  - Petrochemicals (2.348)
  - Charge (834)
    - General (38)
    - Masterbatches (90)
    - Additives (331)
    - Colours (153)
    - Reinforcements/Fillers (222)
  - Polymers (6.107)
    - General (720)
    - Standard Thermoplastics (2.346)
      - General (74)
      - Polyolefins (1.160)
      - Polystyrenes (154)
      - PVC (486)
      - Polyester (337)
      - Expandable (PS, PP, PE) (135)
    - Technical Thermoplastics (1.236)
      - General (87)
      - Styrene Copolymers (101)
      - PC/PMMA (146)
      - Polyamides (421)
      - POM/PBT/PP (106)
      - Technical Compounds (375)
    - PUR (444)
    - Other (1.361)
      - General (46)
      - Composites/Thermosets (287)
      - High Performance (293)
      - Biopolymers (421)
      - Elastomers/TPE (137)
      - Recyclate (177)
  - Other Materials (57)
  - Distribution (309)
- Machinery (501)
  - General (127)
  - Plant Construction (14)
  - Core Machines (289)
    - General (109)
    - Extrusion (36)
    - Injection Moulding (123)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.642)
  - General (405)
  - Extrusion (597)
    - General (20)
    - Flexible Films (291)
    - Rigid Films/Sheets (116)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (177)
  - Blow Moulding (43)
  - PUR (77)
  - Other (299)
    - General (20)
    - Foam (77)
    - Composites/Thermosets (136)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.904)
  - General (37)
  - Packaging (1.882)
  - Construction (297)
  - Automotive / Transport (932)
  - Electrical Appliances (212)
  - Consumer Goods (243)
  - Medical (198)
  - Technical (56)
  - Other (47)
- Regions and Countries (4.017)
  - World (194)
  - German-speaking Countries (472)
  - Europe (1.944)
    - General (464)
    - Italy (142)
    - France (155)
    - Spain/Portugal (97)
    - Great Britain/Ireland (502)
    - Low Countries (74)
    - Central Europe (173)
    - Scandinavia (44)
    - Russia (107)
    - Eastern Europe (46)
    - Southeastern Europe (140)
  - North America (481)
  - Asia (667)
    - General (118)
    - China (389)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (141)
  - Other (37)
  - South America (81)
- Other (2.549)
  - Recycling/Disposal (1.907)
  - Economic Trend (344)
  - Services (41)
  - Logistics (203)
  - Energy (54)
Production and Engineering (3.705)
- Polymer Materials (2.313)
  - Petrochemicals (55)
  - Charge (436)
    - General (14)
    - Masterbatches (111)
    - Additives (223)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.792)
    - General (30)
    - Standard Themoplastics (356)
    - Technical Thermoplastics (593)
      - General (19)
      - Styrene Copolymers (62)
      - PC/PMMA (62)
      - Polyamides (203)
      - POM/PBT/PP (67)
      - Technical Compounds (180)
    - PUR (71)
    - Other (742)
      - General (21)
      - Composites/Thermosets (107)
      - High Performance (159)
      - Biopolymers (240)
      - Elastomers/TPE (113)
      - Recyclate (102)
  - Other (30)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (421)
  - Polymer Materials (140)
  - Technical (13)
  - Product Development (40)
  - Process (81)
  - Application (89)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (54)
- New Products (839)
  - Packaging (549)
  - Construction (34)
  - Automotive / Transport (99)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (38)
- Other (38)
Management (637)
- Purchasing (100)
- General Management (137)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (88)
- Logistics (248)
People (1.474)
Industry (5.740)
- General (1.136)
- Associations/Institutions (2.211)
- Legislation (1.211)
- Environment / Health (1.172)
- plas.TV - Plastics unite(d) (10)
Events (1.122)
Plastic Fantastic (522)
Commentaries (78)
Interviews (131)
Notes by Publisher (69)

Note on Russian polymer prices

Due to Russia's war of aggression against Ukraine, KI Group has suspended all business relations with companies in Russia and Belarus until further notice.

This also affects the collaboration with our Russian cooperation partner. Therefore, we are currently not reporting on Russian polymer prices.

We kindly ask for your understanding.

KI Group – Publishers and Editorial Office