Show topic list

Companies Polymers Standard Thermoplastics

TRINSEO Plastics group still deep in the red / Sale of German plant, PC licences to Deepak Nitrite	18.11.2024
DOW Partnership with Ambipar to boost PE recycling in Brazil / Focus on transforming post-consumer waste into new products	18.11.2024
UPDATE - SABIC Plant for Ultem resin inaugurated in Singapore / Growing demand from high-tech industries	15.11.2024
PVC India's anti-dumping duties beneficial for European producers / Exports to the country could be worthwhile again	14.11.2024
INDORAMA VENTURES Q3 profits soar on cost cuts, restructuring despite lacklustre growth / Main segment PET revenues fall	13.11.2024
BRASKEM Sales, operating results skyrocket / Lower net loss / Change in management	13.11.2024
PETROCHEMICAL MARKETS Polyethylene: Borealis declares force majeure for production in Finland	12.11.2024
COVESTRO Management, supervisory board recommend sale of shares to Adnoc / Arab company pledges to preserve Covestro	12.11.2024
BEWI Q3 sees EPS specialist still in the red / Signs of improvement reported in some markets	11.11.2024
AZERBAIJAN Joint venture kicks off plastics waste processing into pyrolysis oil / Export likely cornerstone of project	11.11.2024
SABIC Plastics group lifts force majeure for PP homopolymers from Germany	07.11.2024
LYONDELLBASELL US business lifts spirits for the short term / Earnings down again, significantly	06.11.2024
ALTERRA ENERGY Industry giants invest to accelerate commercialisation of chemical recycling process / Aim to deploy technology globally	06.11.2024
JBF RAK Emirati holding company takes over Arab parts of PET producer and processor	06.11.2024
UPDATE - PETROCHEMICAL MARKETS PVC production: Vynova declares force majeure for chlorine downstream products	31.10.2024
PETROCHEMICAL MARKETS PET: Shutdown of Alpek plant in UK	31.10.2024
VERSALIS Italian trade unions prep for token strike after announcement of petrochemical plans / “Not the best industrial strategy”	31.10.2024
SK CHEMICALS Copolyester from recycled plastics for use in EBM by Korean resin producer	31.10.2024
NESTE Deal inked to supply Braskem with renewable, recycled feedstocks	30.10.2024
AVANTIUM Plant for PEF precursor FDCA officially operational	29.10.2024
BASF EPS capacity expansion at Ludwighsafen up to 2027 / New EU insulation legislation expected to drive demand	29.10.2024
VERSALIS Italian base chemical production faces major cutbacks / Eni presents restructuring of chemical activities up to 2027	28.10.2024
ORBIA USD 250 mn cost-savings programme launched as Q3 sales, profits fall / No improvement expected in Q4	25.10.2024
TOTALENERGIES Expansion of metallocene VLLDPE range with improved recyclability / Replacement of EVA possible	24.10.2024
IONIQA Dutch startup for chemical PET recycling files for insolvency	23.10.2024

Seite 1 von 138

Topic search

Plastics Information Europe

Polymer Prices (5.840)
- Petrochemicals (423)
- Standard Thermoplastics (920)
- PET (241)
- Engineering Thermoplastics (247)
- Recyclate (353)
  - Standard Thermoplastics / Recyclate (176)
  - Engineering Thermoplastics / Recyclate (177)
- Polyurethanes (239)
- High Performance Polymers (2)
- Composites (175)
- Announcements (2.556)
- World Regions (562)
  - China (278)
    - Standard Thermoplastics (140)
    - Engineering Thermoplastics (138)
  - North America (160)
  - Russia (124)
- Spot Prices (118)
- Forecasts (4)
Companies (33.206)
- Polymer Materials (16.455)
  - Petrochemicals (2.954)
  - Charge (1.798)
    - General (89)
    - Masterbatches (332)
    - Additives (749)
    - Colours (367)
    - Reinforcements/Fillers (261)
  - Polymers (10.573)
    - General (672)
    - Standard Thermoplastics (3.665)
      - General (113)
      - Polyolefins (1.857)
      - Polystyrenes (323)
      - PVC (641)
      - Polyester (544)
      - Expandable (PS, PP, PE) (187)
    - Technical Thermoplastics (3.122)
      - General (348)
      - Styrene Copolymers (250)
      - PC/PMMA (441)
      - Polyamides (858)
      - POM/PBT/PP (304)
      - Technical Compounds (921)
    - PUR (762)
    - Other (2.352)
      - General (100)
      - Composites/Thermosets (398)
      - High Performance (586)
      - Biopolymers (681)
      - Elastomers/TPE (356)
      - Recyclate (231)
  - Distribution (1.130)
- Machinery (1.063)
  - General (27)
  - Plant Construction (129)
  - Core Machines (730)
    - General (88)
    - Extrusion (176)
    - Injection Moulding (363)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (173)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.854)
  - General (857)
  - Extrusion (2.261)
    - General (112)
    - Flexible Films (1.089)
    - Rigid Films/Sheet (368)
    - Pipes (340)
    - Profiles/Rods (255)
    - Other (97)
  - Injection Moulding (1.642)
  - Blow Moulding (491)
  - PUR (285)
  - Other (1.085)
    - General (114)
    - Foam (302)
    - Composites/Thermosets (335)
    - Thermoforming (209)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (233)
- Application (7.025)
  - General (125)
  - Packaging (3.033)
  - Construction (697)
  - Automotive / Transport (1.609)
  - Electrical Appliances (326)
  - Consumer Goods (653)
  - Medical (378)
  - Technical (204)
- Other (1.809)
  - Recycling/Disposal (1.462)
  - Services (248)
  - Logistics (99)
Commercial Register (110)
- Insolvency (105)
- Changes (5)
Markets (22.206)
- Polymer Materials (9.632)
  - Petrochemicals (2.340)
  - Charge (834)
    - General (38)
    - Masterbatches (90)
    - Additives (331)
    - Colours (153)
    - Reinforcements/Fillers (222)
  - Polymers (6.094)
    - General (718)
    - Standard Thermoplastics (2.342)
      - General (74)
      - Polyolefins (1.157)
      - Polystyrenes (154)
      - PVC (485)
      - Polyester (337)
      - Expandable (PS, PP, PE) (135)
    - Technical Thermoplastics (1.234)
      - General (87)
      - Styrene Copolymers (101)
      - PC/PMMA (145)
      - Polyamides (420)
      - POM/PBT/PP (106)
      - Technical Compounds (375)
    - PUR (442)
    - Other (1.358)
      - General (46)
      - Composites/Thermosets (287)
      - High Performance (293)
      - Biopolymers (420)
      - Elastomers/TPE (137)
      - Recyclate (175)
  - Other Materials (57)
  - Distribution (307)
- Machinery (501)
  - General (127)
  - Plant Construction (14)
  - Core Machines (289)
    - General (109)
    - Extrusion (36)
    - Injection Moulding (123)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.638)
  - General (403)
  - Extrusion (596)
    - General (20)
    - Flexible Films (290)
    - Rigid Films/Sheets (116)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (176)
  - Blow Moulding (43)
  - PUR (77)
  - Other (299)
    - General (20)
    - Foam (77)
    - Composites/Thermosets (136)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.889)
  - General (37)
  - Packaging (1.872)
  - Construction (297)
  - Automotive / Transport (928)
  - Electrical Appliances (212)
  - Consumer Goods (243)
  - Medical (198)
  - Technical (56)
  - Other (46)
- Regions and Countries (4.015)
  - World (194)
  - German-speaking Countries (472)
  - Europe (1.943)
    - General (463)
    - Italy (142)
    - France (155)
    - Spain/Portugal (97)
    - Great Britain/Ireland (502)
    - Low Countries (74)
    - Central Europe (173)
    - Scandinavia (44)
    - Russia (107)
    - Eastern Europe (46)
    - Southeastern Europe (140)
  - North America (480)
  - Asia (667)
    - General (118)
    - China (389)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (141)
  - Other (37)
  - South America (81)
- Other (2.531)
  - Recycling/Disposal (1.896)
  - Economic Trend (340)
  - Services (41)
  - Logistics (200)
  - Energy (54)
Production and Engineering (3.687)
- Polymer Materials (2.302)
  - Petrochemicals (55)
  - Charge (434)
    - General (13)
    - Masterbatches (111)
    - Additives (222)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.783)
    - General (29)
    - Standard Themoplastics (356)
    - Technical Thermoplastics (590)
      - General (19)
      - Styrene Copolymers (61)
      - PC/PMMA (62)
      - Polyamides (202)
      - POM/PBT/PP (66)
      - Technical Compounds (180)
    - PUR (69)
    - Other (739)
      - General (21)
      - Composites/Thermosets (106)
      - High Performance (159)
      - Biopolymers (238)
      - Elastomers/TPE (113)
      - Recyclate (102)
  - Other (30)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (420)
  - Polymer Materials (140)
  - Technical (13)
  - Product Development (40)
  - Process (81)
  - Application (89)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (53)
- New Products (833)
  - Packaging (546)
  - Construction (34)
  - Automotive / Transport (97)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (37)
- Other (38)
Management (633)
- Purchasing (100)
- General Management (136)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (88)
- Logistics (245)
People (1.473)
Industry (5.720)
- General (1.135)
- Associations/Institutions (2.202)
- Legislation (1.205)
- Environment / Health (1.168)
- plas.TV - Plastics unite(d) (10)
Events (1.120)
Plastic Fantastic (520)
Commentaries (78)
Interviews (130)
Notes by Publisher (69)