Show topic list

Polymer Prices

POLYMER PRICES PET September 2008: Worldwide economic meltdown has Europe in its grip / Producers' margins bleed red ink / Demand slumps / Downswing likely to continue	03.10.2008
BASE PETROCHEMICALS / AROMATICS / FEEDSTOCKS September 2008	03.10.2008
DOW Price hikes for synthetic rubbers	03.10.2008
LUCITE Price hikes for acrylic resins, composites and sheet	02.10.2008
PETROCHEMICAL MARKETS Ineos Nova to cut European PS output by 30% from October / Margin improvement / Strong rise in HIPS surcharge	01.10.2008
LANXESS Price rises for PA and PBT	24.09.2008
KRATON POLYMERS North American and European HSBC price hikes	24.09.2008
POLYMER PRICES Polyurethane feedstocks in September 2008: Notations up slightly across the board / Indications of further rises during Q4	22.09.2008
OXEA Price rise for higher alkylamines	19.09.2008
ARKEMA Arkema to lift European MMA prices	16.09.2008
POLYMER PRICES Standard Thermoplastics Trend September 2008: Prices start to slide back from summer's peak levels / Notations fall as buyers hold back and demand slackens / Dark clouds hang over Q4	15.09.2008
DOW Price rises for PC resins and PC-based compounds and blends	15.09.2008
ALTUGLAS Resin prices to rise again in October	12.09.2008
POLYMER PRICES Engineering Thermoplastics in August 2008: Hikes at the higher end widen the price range / Imports pressure PBT and POM / Demand turns downward at mid-month / Supply situation will dictate developments	04.09.2008
BASF Prices increases for polyetheramines	04.09.2008
POLYMER PRICES Standard Thermoplastics in August 2008: Further increases across the board / Perceptible levelling off in month's second half / Southern Europe holiday doldrums depress demand / End to upward spiral in sight?	03.09.2008
POLYMER PRICES PET August 2008: Summer rally short lived / Soft demand depresses notations further / Outlook cloudy	03.09.2008
BASE PETROCHEMICALS / AROMATICS / FEEDSTOCKS August 2008	03.09.2008
TRONOX Further European price hike for titanium dioxide	03.09.2008
DUPONT Price increase for titanium dioxide products	02.09.2008
DOW Price hikes for wire and cable compounds	29.08.2008
POLYMER PRICES Polyurethane feedstocks in August 2008: MDI moves up strongly / TDI breaches "magic barrier" of EUR 3,000/t / Polyol prices rise appreciably for bulk business / Plans to pass on remaining cost increases in Q3	25.08.2008
DOW Price hike for styrenic polymers	22.08.2008
HUNTSMAN TPU price hikes in EMEA and India	21.08.2008
CHEMTURA Price hike for phosphate ester flame retardants	20.08.2008

Seite 193 von 227

Topic search

Plastics Information Europe

Polymer Prices (5.680)
- Petrochemicals (384)
- Standard Thermoplastics (883)
- PET (235)
- Engineering Thermoplastics (240)
- Recyclate (339)
  - Standard Thermoplastics / Recyclate (169)
  - Engineering Thermoplastics / Recyclate (170)
- Polyurethanes (232)
- High Performance Polymers (2)
- Composites (168)
- Announcements (2.540)
- World Regions (541)
  - China (264)
    - Standard Thermoplastics (133)
    - Engineering Thermoplastics (131)
  - North America (153)
  - Russia (124)
- Spot Prices (111)
- Forecasts (5)
Companies (32.059)
- Polymer Materials (15.877)
  - Petrochemicals (2.854)
  - Charge (1.757)
    - General (88)
    - Masterbatches (328)
    - Additives (728)
    - Colours (355)
    - Reinforcements/Fillers (258)
  - Polymers (10.165)
    - General (644)
    - Standard Thermoplastics (3.521)
      - General (112)
      - Polyolefins (1.773)
      - Polystyrenes (315)
      - PVC (620)
      - Polyester (519)
      - Expandable (PS, PP, PE) (182)
    - Technical Thermoplastics (3.030)
      - General (341)
      - Styrene Copolymers (241)
      - PC/PMMA (417)
      - Polyamides (834)
      - POM/PBT/PP (297)
      - Technical Compounds (900)
    - PUR (731)
    - Other (2.239)
      - General (95)
      - Composites/Thermosets (387)
      - High Performance (567)
      - Biopolymers (653)
      - Elastomers/TPE (342)
      - Recyclate (195)
  - Distribution (1.101)
- Machinery (1.043)
  - General (26)
  - Plant Construction (127)
  - Core Machines (715)
    - General (85)
    - Extrusion (174)
    - Injection Moulding (353)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (171)
    - General (30)
    - Control Systems (4)
    - Automatisation (32)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.677)
  - General (831)
  - Extrusion (2.199)
    - General (110)
    - Flexible Films (1.058)
    - Rigid Films/Sheet (358)
    - Pipes (330)
    - Profiles/Rods (249)
    - Other (94)
  - Injection Moulding (1.592)
  - Blow Moulding (484)
  - PUR (273)
  - Other (1.068)
    - General (114)
    - Foam (298)
    - Composites/Thermosets (328)
    - Thermoforming (203)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (230)
- Application (6.778)
  - General (124)
  - Packaging (2.913)
  - Construction (674)
  - Automotive / Transport (1.553)
  - Electrical Appliances (318)
  - Consumer Goods (631)
  - Medical (368)
  - Technical (197)
- Other (1.684)
  - Recycling/Disposal (1.372)
  - Services (242)
  - Logistics (70)
Commercial Register (102)
- Insolvency (97)
- Changes (5)
Markets (21.351)
- Polymer Materials (9.269)
  - Petrochemicals (2.254)
  - Charge (817)
    - General (38)
    - Masterbatches (89)
    - Additives (324)
    - Colours (148)
    - Reinforcements/Fillers (218)
  - Polymers (5.845)
    - General (653)
    - Standard Thermoplastics (2.252)
      - General (73)
      - Polyolefins (1.115)
      - Polystyrenes (147)
      - PVC (467)
      - Polyester (320)
      - Expandable (PS, PP, PE) (130)
    - Technical Thermoplastics (1.208)
      - General (86)
      - Styrene Copolymers (97)
      - PC/PMMA (139)
      - Polyamides (414)
      - POM/PBT/PP (104)
      - Technical Compounds (368)
    - PUR (428)
    - Other (1.304)
      - General (42)
      - Composites/Thermosets (285)
      - High Performance (290)
      - Biopolymers (406)
      - Elastomers/TPE (132)
      - Recyclate (149)
  - Other Materials (57)
  - Distribution (296)
- Machinery (492)
  - General (127)
  - Plant Construction (14)
  - Core Machines (280)
    - General (105)
    - Extrusion (35)
    - Injection Moulding (119)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.615)
  - General (393)
  - Extrusion (590)
    - General (20)
    - Flexible Films (287)
    - Rigid Films/Sheets (114)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (10)
  - Injection Moulding (174)
  - Blow Moulding (43)
  - PUR (75)
  - Other (296)
    - General (20)
    - Foam (75)
    - Composites/Thermosets (135)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.698)
  - General (33)
  - Packaging (1.765)
  - Construction (282)
  - Automotive / Transport (884)
  - Electrical Appliances (211)
  - Consumer Goods (232)
  - Medical (192)
  - Technical (55)
  - Other (44)
- Regions and Countries (3.947)
  - World (193)
  - German-speaking Countries (461)
  - Europe (1.900)
    - General (452)
    - Italy (139)
    - France (153)
    - Spain/Portugal (94)
    - Great Britain/Ireland (495)
    - Low Countries (74)
    - Central Europe (171)
    - Scandinavia (43)
    - Russia (97)
    - Eastern Europe (44)
    - Southeastern Europe (138)
  - North America (471)
  - Asia (665)
    - General (117)
    - China (388)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (140)
  - Other (37)
  - South America (80)
- Other (2.330)
  - Recycling/Disposal (1.776)
  - Economic Trend (293)
  - Services (40)
  - Logistics (171)
  - Energy (50)
Production and Engineering (3.570)
- Polymer Materials (2.237)
  - Petrochemicals (52)
  - Charge (425)
    - General (12)
    - Masterbatches (108)
    - Additives (217)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.730)
    - General (27)
    - Standard Themoplastics (348)
    - Technical Thermoplastics (584)
      - General (19)
      - Styrene Copolymers (61)
      - PC/PMMA (62)
      - Polyamides (198)
      - POM/PBT/PP (65)
      - Technical Compounds (179)
    - PUR (66)
    - Other (705)
      - General (21)
      - Composites/Thermosets (105)
      - High Performance (158)
      - Biopolymers (226)
      - Elastomers/TPE (107)
      - Recyclate (88)
  - Other (30)
- Machinery (93)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (32)
- Research (402)
  - Polymer Materials (135)
  - Technical (12)
  - Product Development (39)
  - Process (78)
  - Application (86)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (48)
- New Products (800)
  - Packaging (522)
  - Construction (33)
  - Automotive / Transport (97)
  - Electrical Appliances (25)
  - Consumer Goods (46)
  - Medical (35)
  - Technical (7)
  - Other (35)
- Other (38)
Management (575)
- Purchasing (95)
- General Management (118)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (85)
- Logistics (213)
People (1.448)
Industry (5.360)
- General (1.085)
- Associations/Institutions (2.080)
- Legislation (1.107)
- Environment / Health (1.078)
- plas.TV - Plastics unite(d) (10)
Events (1.105)
Plastic Fantastic (495)
Commentaries (75)
Interviews (119)
Notes by Publisher (68)