Show topic list

Polymer Prices

EVONIK Price increases for methacrylate monomers	08.09.2009
BASF PS price reduction follows lower SM contract	04.09.2009
POLYMER PRICES Engineering Thermoplastics in August 2009: Price movements mostly flat / ABS and PP up again on higher feedstock prices / Small gain for natural PA 6 / Balanced supply and firm demand likely to drive September prices upward	04.09.2009
POLYMER PRICES Styrene monomer follows benzene downward	04.09.2009
POLYMER PRICES Standard Thermoplastics in August 2009: Feedstock costs drive notations up / Some polyolefins tight / PVC producers pass higher chlorine costs through the chain / SM increases are factored into styrenics / Mixed outlook	03.09.2009
POLYMER PRICES PET August 2009: Cost rises passed down the chain / Soft demand brakes margin improvement	03.09.2009
BASE PETROCHEMICALS / AROMATICS / FEEDSTOCKS August 2009	03.09.2009
DOW Further price increases for styrenic copolymers	02.09.2009
ARKEMA Price increase for functional polyolefins	01.09.2009
LYONDELLBASELL Significant price hike for PE and PP	01.09.2009
BASF Price increases for PVC modifiers	28.08.2009
HEXION Price hikes for epoxy resins in Europe	28.08.2009
POLYMER PRICES Polyurethane feedstocks in August 2009: MDI unexpectedly strong / TDI and polyols stable / Supply situation shaky / Insulation grades boost order activity / Demand livelier as holidays end / Higher prices in sight	27.08.2009
DOW European price hike for PC products in September	27.08.2009
CELANESE Price rises for VAM in Europe and Americas	25.08.2009
DOW Prices for PE resins rise again	24.08.2009
HUNTSMAN European price rise for MDI products and systems	20.08.2009
DOW Price hikes for epoxy resins	20.08.2009
DSM COMPOSITE RESINS Price hike for entire resins range by September	18.08.2009
POLYMER PRICES Standard Thermoplastics Trend August 2009: Notations continue climbing / Supply situation more balanced / Some PP and PVC products tight / Overall demand a little livelier / PS buyers still holding back	17.08.2009
EVONIK Prices for PMMA sheet to rise in September	10.08.2009
POLYMER PRICES Engineering Thermoplastics in July 2009: Notations mostly flat / Only ABS and PP compounds make gains / Supply moves into balance / Demand at low level / Higher feedstocks prompt polymer hike plans	06.08.2009
POLYMER PRICES Standard Thermoplastics in July 2009: Producers push through significant hikes / Gains mostly top 10% / Buyers in desperate need / HDPE and PVC short / Plant maintenance still ongoing / Further increases certain	05.08.2009
POLYMER PRICES PET July 2009: Bulk business holds up / Southern Europe tends firmer / Asian notations rising / European demand improves as Asian product directed towards eastern Europe / Stabile prices likely	05.08.2009
BASE PETROCHEMICALS / AROMATICS / FEEDSTOCKS July 2009	05.08.2009

Seite 187 von 227

Topic search

Plastics Information Europe

Polymer Prices (5.680)
- Petrochemicals (384)
- Standard Thermoplastics (883)
- PET (235)
- Engineering Thermoplastics (240)
- Recyclate (339)
  - Standard Thermoplastics / Recyclate (169)
  - Engineering Thermoplastics / Recyclate (170)
- Polyurethanes (232)
- High Performance Polymers (2)
- Composites (168)
- Announcements (2.540)
- World Regions (541)
  - China (264)
    - Standard Thermoplastics (133)
    - Engineering Thermoplastics (131)
  - North America (153)
  - Russia (124)
- Spot Prices (111)
- Forecasts (5)
Companies (32.059)
- Polymer Materials (15.877)
  - Petrochemicals (2.854)
  - Charge (1.757)
    - General (88)
    - Masterbatches (328)
    - Additives (728)
    - Colours (355)
    - Reinforcements/Fillers (258)
  - Polymers (10.165)
    - General (644)
    - Standard Thermoplastics (3.521)
      - General (112)
      - Polyolefins (1.773)
      - Polystyrenes (315)
      - PVC (620)
      - Polyester (519)
      - Expandable (PS, PP, PE) (182)
    - Technical Thermoplastics (3.030)
      - General (341)
      - Styrene Copolymers (241)
      - PC/PMMA (417)
      - Polyamides (834)
      - POM/PBT/PP (297)
      - Technical Compounds (900)
    - PUR (731)
    - Other (2.239)
      - General (95)
      - Composites/Thermosets (387)
      - High Performance (567)
      - Biopolymers (653)
      - Elastomers/TPE (342)
      - Recyclate (195)
  - Distribution (1.101)
- Machinery (1.043)
  - General (26)
  - Plant Construction (127)
  - Core Machines (715)
    - General (85)
    - Extrusion (174)
    - Injection Moulding (353)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (171)
    - General (30)
    - Control Systems (4)
    - Automatisation (32)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.677)
  - General (831)
  - Extrusion (2.199)
    - General (110)
    - Flexible Films (1.058)
    - Rigid Films/Sheet (358)
    - Pipes (330)
    - Profiles/Rods (249)
    - Other (94)
  - Injection Moulding (1.592)
  - Blow Moulding (484)
  - PUR (273)
  - Other (1.068)
    - General (114)
    - Foam (298)
    - Composites/Thermosets (328)
    - Thermoforming (203)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (230)
- Application (6.778)
  - General (124)
  - Packaging (2.913)
  - Construction (674)
  - Automotive / Transport (1.553)
  - Electrical Appliances (318)
  - Consumer Goods (631)
  - Medical (368)
  - Technical (197)
- Other (1.684)
  - Recycling/Disposal (1.372)
  - Services (242)
  - Logistics (70)
Commercial Register (102)
- Insolvency (97)
- Changes (5)
Markets (21.351)
- Polymer Materials (9.269)
  - Petrochemicals (2.254)
  - Charge (817)
    - General (38)
    - Masterbatches (89)
    - Additives (324)
    - Colours (148)
    - Reinforcements/Fillers (218)
  - Polymers (5.845)
    - General (653)
    - Standard Thermoplastics (2.252)
      - General (73)
      - Polyolefins (1.115)
      - Polystyrenes (147)
      - PVC (467)
      - Polyester (320)
      - Expandable (PS, PP, PE) (130)
    - Technical Thermoplastics (1.208)
      - General (86)
      - Styrene Copolymers (97)
      - PC/PMMA (139)
      - Polyamides (414)
      - POM/PBT/PP (104)
      - Technical Compounds (368)
    - PUR (428)
    - Other (1.304)
      - General (42)
      - Composites/Thermosets (285)
      - High Performance (290)
      - Biopolymers (406)
      - Elastomers/TPE (132)
      - Recyclate (149)
  - Other Materials (57)
  - Distribution (296)
- Machinery (492)
  - General (127)
  - Plant Construction (14)
  - Core Machines (280)
    - General (105)
    - Extrusion (35)
    - Injection Moulding (119)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.615)
  - General (393)
  - Extrusion (590)
    - General (20)
    - Flexible Films (287)
    - Rigid Films/Sheets (114)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (10)
  - Injection Moulding (174)
  - Blow Moulding (43)
  - PUR (75)
  - Other (296)
    - General (20)
    - Foam (75)
    - Composites/Thermosets (135)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.698)
  - General (33)
  - Packaging (1.765)
  - Construction (282)
  - Automotive / Transport (884)
  - Electrical Appliances (211)
  - Consumer Goods (232)
  - Medical (192)
  - Technical (55)
  - Other (44)
- Regions and Countries (3.947)
  - World (193)
  - German-speaking Countries (461)
  - Europe (1.900)
    - General (452)
    - Italy (139)
    - France (153)
    - Spain/Portugal (94)
    - Great Britain/Ireland (495)
    - Low Countries (74)
    - Central Europe (171)
    - Scandinavia (43)
    - Russia (97)
    - Eastern Europe (44)
    - Southeastern Europe (138)
  - North America (471)
  - Asia (665)
    - General (117)
    - China (388)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (140)
  - Other (37)
  - South America (80)
- Other (2.330)
  - Recycling/Disposal (1.776)
  - Economic Trend (293)
  - Services (40)
  - Logistics (171)
  - Energy (50)
Production and Engineering (3.570)
- Polymer Materials (2.237)
  - Petrochemicals (52)
  - Charge (425)
    - General (12)
    - Masterbatches (108)
    - Additives (217)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.730)
    - General (27)
    - Standard Themoplastics (348)
    - Technical Thermoplastics (584)
      - General (19)
      - Styrene Copolymers (61)
      - PC/PMMA (62)
      - Polyamides (198)
      - POM/PBT/PP (65)
      - Technical Compounds (179)
    - PUR (66)
    - Other (705)
      - General (21)
      - Composites/Thermosets (105)
      - High Performance (158)
      - Biopolymers (226)
      - Elastomers/TPE (107)
      - Recyclate (88)
  - Other (30)
- Machinery (93)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (32)
- Research (402)
  - Polymer Materials (135)
  - Technical (12)
  - Product Development (39)
  - Process (78)
  - Application (86)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (48)
- New Products (800)
  - Packaging (522)
  - Construction (33)
  - Automotive / Transport (97)
  - Electrical Appliances (25)
  - Consumer Goods (46)
  - Medical (35)
  - Technical (7)
  - Other (35)
- Other (38)
Management (575)
- Purchasing (95)
- General Management (118)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (85)
- Logistics (213)
People (1.448)
Industry (5.360)
- General (1.085)
- Associations/Institutions (2.080)
- Legislation (1.107)
- Environment / Health (1.078)
- plas.TV - Plastics unite(d) (10)
Events (1.105)
Plastic Fantastic (495)
Commentaries (75)
Interviews (119)
Notes by Publisher (68)