Show topic list

Industry Environment / Health

GERMANY Deposit starts for milk products in single-use plastic bottles / Green group wants to include beverage cartons	22.01.2024
BOREALIS Two Belgian sites achieve zero pellet loss certification	22.01.2024
NANOPLASTICS Research reveals smallest-ever plastic fragments in bottled water / Reduced size may not reduce threat / New debate rages	16.01.2024
PFAS EPA revs regulatory engine / New rules for “inactive” chemicals / Seven substances added to TRI	12.01.2024
INEOS Supplier secures new environmental licence / Large-scale Project One cracker a go again	09.01.2024
PFAS Settlements, new disputes set to claim more attention in 2024 / Some hope for Chemours / EPA, ECHA moves to be watched	09.01.2024
US RECYCLING California agency data supports state packaging waste law	09.01.2024
SUSTAINABILITY Trillions more investment needed to reach global net-zero targets – Deloitte	08.01.2024
SINGLE-USE PLASTICS Dubai introduces phased ban on SUP products / Regulation requires education campaigns, sale of reusable alternatives	08.01.2024
CHILE Recycling initiative targets industrial packaging	08.01.2024
EU PACKAGING Position of member states sets stage for talks on final regs / Interest groups raise concerns about PPWR	04.01.2024
UK Wrap urges supermarkets to offer loose fresh produce, cut food waste / Campaign highlights bulk-packaged fruit, vegetables	04.01.2024
SABIC / LINDE Firms seek to decarbonise ethylene glycol process / Saudi government joins carbon capture and storage thinktank	02.01.2024
YEAR-ENDER: RECYCLING Will advanced – or chemical – recycling be the silver bullet for hard-to-recycle plastics?	22.12.2023
PFAS EPA says Inhance must change fluorination process for HDPE containers / NGOs cheer, company goes to court	21.12.2023
EDITORIAL Who gives a hoot about climate? / UN conference without, then with fossil fuel phase-out	19.12.2023
MULTILAYER FILM New BASF-commissioned studies confirm recyclability of PA-containing waste / Results can inform European Design for Recycling	15.12.2023
POLAND Uptick in circular economy investments / Plastics waste management solutions awarded with state grant	14.12.2023
PLASTICS AND HEALTH USA Launch of new thrust for environmental justice through the back door / Campaign to be folded into Inflation Reduction Act	14.12.2023
MARINE LITTER Germany joins initiative to collect old fishing tackle / Berlin pledges EUR 100,000 annually	14.12.2023
CHEMICAL INDUSTRY Low-carbon group cuts ties with World Economic Forum / CEOs line up to accelerate journey to net zero targets	13.12.2023
ROMANIA Deposit-return system begins operations / Target set at 90% collection by 2026	13.12.2023
RECYCLING SWITZERLAND Association founded for collection of plastics packaging, beverage cartons	12.12.2023
US INDUSTRY Congress reintroduces bill to extend producer responsibility, control resin production / Trade groups warn of stagnation in chemicals, plastics	11.12.2023
HAZARDOUS WASTE Approval of new European rules proposed by waste management association FEAD / Due to take effect in 2025	11.12.2023

Seite 6 von 47

Topic search

Plastics Information Europe

Polymer Prices (5.840)
- Petrochemicals (423)
- Standard Thermoplastics (920)
- PET (241)
- Engineering Thermoplastics (247)
- Recyclate (353)
  - Standard Thermoplastics / Recyclate (176)
  - Engineering Thermoplastics / Recyclate (177)
- Polyurethanes (239)
- High Performance Polymers (2)
- Composites (175)
- Announcements (2.556)
- World Regions (562)
  - China (278)
    - Standard Thermoplastics (140)
    - Engineering Thermoplastics (138)
  - North America (160)
  - Russia (124)
- Spot Prices (118)
- Forecasts (4)
Companies (33.214)
- Polymer Materials (16.458)
  - Petrochemicals (2.954)
  - Charge (1.798)
    - General (89)
    - Masterbatches (332)
    - Additives (749)
    - Colours (367)
    - Reinforcements/Fillers (261)
  - Polymers (10.576)
    - General (672)
    - Standard Thermoplastics (3.666)
      - General (113)
      - Polyolefins (1.858)
      - Polystyrenes (323)
      - PVC (641)
      - Polyester (544)
      - Expandable (PS, PP, PE) (187)
    - Technical Thermoplastics (3.123)
      - General (348)
      - Styrene Copolymers (251)
      - PC/PMMA (441)
      - Polyamides (858)
      - POM/PBT/PP (304)
      - Technical Compounds (921)
    - PUR (762)
    - Other (2.353)
      - General (100)
      - Composites/Thermosets (398)
      - High Performance (586)
      - Biopolymers (681)
      - Elastomers/TPE (356)
      - Recyclate (232)
  - Distribution (1.130)
- Machinery (1.063)
  - General (27)
  - Plant Construction (129)
  - Core Machines (730)
    - General (88)
    - Extrusion (176)
    - Injection Moulding (363)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (173)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.855)
  - General (857)
  - Extrusion (2.261)
    - General (112)
    - Flexible Films (1.089)
    - Rigid Films/Sheet (368)
    - Pipes (340)
    - Profiles/Rods (255)
    - Other (97)
  - Injection Moulding (1.643)
  - Blow Moulding (491)
  - PUR (285)
  - Other (1.085)
    - General (114)
    - Foam (302)
    - Composites/Thermosets (335)
    - Thermoforming (209)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (233)
- Application (7.027)
  - General (125)
  - Packaging (3.033)
  - Construction (697)
  - Automotive / Transport (1.611)
  - Electrical Appliances (326)
  - Consumer Goods (653)
  - Medical (378)
  - Technical (204)
- Other (1.811)
  - Recycling/Disposal (1.463)
  - Services (248)
  - Logistics (100)
Commercial Register (110)
- Insolvency (105)
- Changes (5)
Markets (22.213)
- Polymer Materials (9.634)
  - Petrochemicals (2.340)
  - Charge (834)
    - General (38)
    - Masterbatches (90)
    - Additives (331)
    - Colours (153)
    - Reinforcements/Fillers (222)
  - Polymers (6.096)
    - General (718)
    - Standard Thermoplastics (2.343)
      - General (74)
      - Polyolefins (1.158)
      - Polystyrenes (154)
      - PVC (485)
      - Polyester (337)
      - Expandable (PS, PP, PE) (135)
    - Technical Thermoplastics (1.234)
      - General (87)
      - Styrene Copolymers (101)
      - PC/PMMA (145)
      - Polyamides (420)
      - POM/PBT/PP (106)
      - Technical Compounds (375)
    - PUR (442)
    - Other (1.359)
      - General (46)
      - Composites/Thermosets (287)
      - High Performance (293)
      - Biopolymers (420)
      - Elastomers/TPE (137)
      - Recyclate (176)
  - Other Materials (57)
  - Distribution (307)
- Machinery (501)
  - General (127)
  - Plant Construction (14)
  - Core Machines (289)
    - General (109)
    - Extrusion (36)
    - Injection Moulding (123)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.638)
  - General (403)
  - Extrusion (596)
    - General (20)
    - Flexible Films (290)
    - Rigid Films/Sheets (116)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (176)
  - Blow Moulding (43)
  - PUR (77)
  - Other (299)
    - General (20)
    - Foam (77)
    - Composites/Thermosets (136)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.891)
  - General (37)
  - Packaging (1.872)
  - Construction (297)
  - Automotive / Transport (930)
  - Electrical Appliances (212)
  - Consumer Goods (243)
  - Medical (198)
  - Technical (56)
  - Other (46)
- Regions and Countries (4.015)
  - World (194)
  - German-speaking Countries (472)
  - Europe (1.943)
    - General (463)
    - Italy (142)
    - France (155)
    - Spain/Portugal (97)
    - Great Britain/Ireland (502)
    - Low Countries (74)
    - Central Europe (173)
    - Scandinavia (44)
    - Russia (107)
    - Eastern Europe (46)
    - Southeastern Europe (140)
  - North America (480)
  - Asia (667)
    - General (118)
    - China (389)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (141)
  - Other (37)
  - South America (81)
- Other (2.534)
  - Recycling/Disposal (1.897)
  - Economic Trend (341)
  - Services (41)
  - Logistics (201)
  - Energy (54)
Production and Engineering (3.688)
- Polymer Materials (2.303)
  - Petrochemicals (55)
  - Charge (434)
    - General (13)
    - Masterbatches (111)
    - Additives (222)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.784)
    - General (29)
    - Standard Themoplastics (356)
    - Technical Thermoplastics (591)
      - General (19)
      - Styrene Copolymers (62)
      - PC/PMMA (62)
      - Polyamides (202)
      - POM/PBT/PP (66)
      - Technical Compounds (180)
    - PUR (69)
    - Other (739)
      - General (21)
      - Composites/Thermosets (106)
      - High Performance (159)
      - Biopolymers (238)
      - Elastomers/TPE (113)
      - Recyclate (102)
  - Other (30)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (420)
  - Polymer Materials (140)
  - Technical (13)
  - Product Development (40)
  - Process (81)
  - Application (89)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (53)
- New Products (833)
  - Packaging (546)
  - Construction (34)
  - Automotive / Transport (97)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (37)
- Other (38)
Management (634)
- Purchasing (100)
- General Management (136)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (88)
- Logistics (246)
People (1.473)
Industry (5.721)
- General (1.135)
- Associations/Institutions (2.203)
- Legislation (1.205)
- Environment / Health (1.168)
- plas.TV - Plastics unite(d) (10)
Events (1.120)
Plastic Fantastic (521)
Commentaries (78)
Interviews (130)
Notes by Publisher (69)