www.pieweb.com

Industry Associations/Institutions

MICROPLASTICS
EU seeks to tighten controls on pellets / Move supports push to cut pollution
19.10.2023
PACKAGING RECYCLING
Holy Grail initiative enters final testing phase / Pilot market launch planned for 2024 in France
18.10.2023
RECYCLASS
European groups approve Penn Color UV blocker / Material considered compatible with PET bottle reclamation
17.10.2023
EUROPEAN RECYCLING
Imports, weak demand threaten reclaim firms, industry group warns / 'Future of recycling' at stake / rPET production down sharply
12.10.2023
PET RECYCLING
European PET Bottle Platform publishes design guidelines for opaque white bottles
11.10.2023
US RECYCLING
EPA to back reclaim projects with most spending in 30 years / Plastics industry touts its own steps to date
09.10.2023
MICROPLASTICS
EU ban targets cosmetics / Transition period for artifical turf / Building industry receives exemptions
06.10.2023
PLASTIC PACKAGING
Two-thirds of German firms say economic situation is bad / Companies demand cost relief
05.10.2023
UN PLASTICS WASTE TREATY
Nordic nations demand tough rules / Plans could cut mismanaged plastics waste by 90% / Nordic Council report
04.10.2023
GERMAN CHEMICAL INDUSTRY
“Industry has a decisive share in the climate crisis.” – environmental organisation BUND presents market overview
04.10.2023
PFAS
EU ends consultation on proposed restrictions / ECHA scientists to review responses / Ban expected in 2025
02.10.2023
EUROPEAN CHEMICAL INDUSTRY
Cefic: H1 production drops over 12% / Better second half unlikely
27.09.2023
CHINA
Chemical association wants greener industry / Transition seen as major factor in further development / Competition comes from profit motive
27.09.2023
FRANCE
Industry group unveils plan to recycle PS packaging / Elipso backs EU Parliament on deposit system / Proposed EPS rules face backlash
25.09.2023
BOREALIS
Material recovery facility inaugurated in Indonesia / Part of programme to stop plastics marine litter
25.09.2023
AUTOMOTIVE MARKET
EU new car registrations surge 21% in August / Battery EVs surpass 20% market share / Interest in petrol vehicles eases
22.09.2023
UN PLASTICS WASTE TREATY
First draft divides interested parties / Proposed ban on materials, products lacks specifics / A ‘missed opportunity', says Plastics Europe
21.09.2023
RECYCLASS
Norway‘s Norner accredited as certification body / In-mould label technology certified as compatible with rigid PP recycling stream
21.09.2023
CIRCULAR ECONOMY GERMANY
Single-Use Plastic Fund Act: what companies need to know about registration and payment
21.09.2023
US REGULATION
First US state to ban government purchases of SUP bottles
20.09.2023
GERMAN CHEMICAL INDUSTRY
Producers still gloomy as downturn continues / Resin production falls sharply / VCI repeats calls for help from Berlin
19.09.2023
PLASTIC PACKAGING
Germany unveils new reclaim standard / NC-based printing inks dubbed non-recyclable / Further changes postponed
15.09.2023
GERMAN PLASTICS MACHINERY
Orders drop nearly one-third in January-July / Sector officials report ‘total collapse'
12.09.2023
ENERGY MARKET
Increased mistrust in energy transition / Chemical, polymer industry fears inadequate electricity and gas supply - DIHK survey
11.09.2023
CIRCULAR ECONOMY GERMANY
Federal government sets levy rates on SUP products / Funds to be directed to public sector 2025 onwards
07.09.2023
Seite 12 von 89
Topic search
Plastics Information Europe
  • Polymer Prices (5.872)
    • Petrochemicals (432)
    • Standard Thermoplastics (926)
    • PET (242)
    • Engineering Thermoplastics (249)
    • Recyclate (356)
      • General (1)
      • Standard Thermoplastics / Recyclate (177)
      • Engineering Thermoplastics / Recyclate (178)
    • Polyurethanes (241)
    • High Performance Polymers (2)
    • Composites (176)
    • Announcements (2.559)
    • World Regions (565)
      • China (280)
        • Standard Thermoplastics (141)
        • Engineering Thermoplastics (139)
      • North America (161)
      • Russia (124)
    • Spot Prices (119)
    • Forecasts (5)
  • Companies (33.385)
    • Polymer Materials (16.549)
      • Petrochemicals (2.967)
      • Charge (1.803)
        • General (89)
        • Masterbatches (332)
        • Additives (754)
        • Colours (367)
        • Reinforcements/Fillers (261)
      • Polymers (10.638)
        • General (676)
        • Standard Thermoplastics (3.682)
          • General (113)
          • Polyolefins (1.870)
          • Polystyrenes (323)
          • PVC (644)
          • Polyester (545)
          • Expandable (PS, PP, PE) (187)
        • Technical Thermoplastics (3.141)
          • General (349)
          • Styrene Copolymers (253)
          • PC/PMMA (444)
          • Polyamides (862)
          • POM/PBT/PP (306)
          • Technical Compounds (927)
        • PUR (767)
        • Other (2.372)
          • General (100)
          • Composites/Thermosets (400)
          • High Performance (590)
          • Biopolymers (684)
          • Elastomers/TPE (359)
          • Recyclate (239)
      • Distribution (1.141)
    • Machinery (1.066)
      • General (27)
      • Plant Construction (130)
      • Core Machines (732)
        • General (89)
        • Extrusion (176)
        • Injection Moulding (364)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (173)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.887)
      • General (863)
      • Extrusion (2.269)
        • General (112)
        • Flexible Films (1.096)
        • Rigid Films/Sheet (368)
        • Pipes (341)
        • Profiles/Rods (255)
        • Other (97)
      • Injection Moulding (1.652)
      • Blow Moulding (492)
      • PUR (288)
      • Other (1.089)
        • General (114)
        • Foam (302)
        • Composites/Thermosets (337)
        • Thermoforming (210)
        • Rotational Moulding (31)
        • Additive Manufacturing (95)
      • Finishing (234)
    • Application (7.056)
      • General (125)
      • Packaging (3.045)
      • Construction (697)
      • Automotive / Transport (1.621)
      • Electrical Appliances (328)
      • Consumer Goods (656)
      • Medical (379)
      • Technical (205)
    • Other (1.827)
      • Recycling/Disposal (1.474)
      • Services (249)
      • Logistics (104)
  • Commercial Register (113)
    • Insolvency (108)
    • Changes (5)
  • Markets (22.365)
    • Polymer Materials (9.700)
      • Petrochemicals (2.358)
      • Charge (836)
        • General (38)
        • Masterbatches (90)
        • Additives (333)
        • Colours (153)
        • Reinforcements/Fillers (222)
      • Polymers (6.134)
        • General (728)
        • Standard Thermoplastics (2.357)
          • General (74)
          • Polyolefins (1.166)
          • Polystyrenes (154)
          • PVC (488)
          • Polyester (340)
          • Expandable (PS, PP, PE) (135)
        • Technical Thermoplastics (1.238)
          • General (87)
          • Styrene Copolymers (102)
          • PC/PMMA (146)
          • Polyamides (421)
          • POM/PBT/PP (107)
          • Technical Compounds (375)
        • PUR (445)
        • Other (1.366)
          • General (46)
          • Composites/Thermosets (288)
          • High Performance (293)
          • Biopolymers (423)
          • Elastomers/TPE (137)
          • Recyclate (179)
      • Other Materials (57)
      • Distribution (315)
    • Machinery (501)
      • General (127)
      • Plant Construction (14)
      • Core Machines (289)
        • General (109)
        • Extrusion (36)
        • Injection Moulding (123)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.643)
      • General (405)
      • Extrusion (598)
        • General (20)
        • Flexible Films (292)
        • Rigid Films/Sheets (116)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (177)
      • Blow Moulding (43)
      • PUR (77)
      • Other (299)
        • General (20)
        • Foam (77)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.922)
      • General (37)
      • Packaging (1.893)
      • Construction (297)
      • Automotive / Transport (936)
      • Electrical Appliances (214)
      • Consumer Goods (243)
      • Medical (198)
      • Technical (57)
      • Other (47)
    • Regions and Countries (4.022)
      • World (194)
      • German-speaking Countries (473)
      • Europe (1.947)
        • General (466)
        • Italy (142)
        • France (155)
        • Spain/Portugal (97)
        • Great Britain/Ireland (502)
        • Low Countries (74)
        • Central Europe (173)
        • Scandinavia (44)
        • Russia (108)
        • Eastern Europe (46)
        • Southeastern Europe (140)
      • North America (482)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (141)
      • Other (37)
      • South America (81)
    • Other (2.577)
      • Recycling/Disposal (1.921)
      • Economic Trend (351)
      • Services (41)
      • Logistics (206)
      • Energy (58)
  • Production and Engineering (3.709)
    • Polymer Materials (2.315)
      • Petrochemicals (55)
      • Charge (436)
        • General (14)
        • Masterbatches (111)
        • Additives (223)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.794)
        • General (30)
        • Standard Themoplastics (357)
        • Technical Thermoplastics (593)
          • General (19)
          • Styrene Copolymers (62)
          • PC/PMMA (62)
          • Polyamides (203)
          • POM/PBT/PP (67)
          • Technical Compounds (180)
        • PUR (72)
        • Other (742)
          • General (21)
          • Composites/Thermosets (107)
          • High Performance (159)
          • Biopolymers (240)
          • Elastomers/TPE (113)
          • Recyclate (102)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (422)
      • Polymer Materials (140)
      • Technical (13)
      • Product Development (40)
      • Process (81)
      • Application (89)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (55)
    • New Products (840)
      • Packaging (550)
      • Construction (34)
      • Automotive / Transport (99)
      • Electrical Appliances (26)
      • Consumer Goods (49)
      • Medical (37)
      • Technical (7)
      • Other (38)
    • Other (38)
  • Management (643)
    • Purchasing (100)
    • General Management (139)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (89)
    • Logistics (251)
  • People (1.478)
  • Industry (5.766)
    • General (1.142)
    • Associations/Institutions (2.221)
    • Legislation (1.218)
    • Environment / Health (1.175)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.122)
  • Plastic Fantastic (525)
  • Commentaries (78)
  • Interviews (131)
  • Notes by Publisher (69)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 23/12/2024
Ref: 4jmpdsitmfm2tiqx0qkq2pnv
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?node=100359&page=12&pageid=302