Show topic list

Production and Engineering Polymer Materials Polymers

MGP Range of heat-tolerant compostable resins introduced / Focus on packaging and durable products	20.09.2012
QUADRANT EPP Engineering plastic introduced for semiconductor applications	12.09.2012
LEHMANN & VOSS Additive and process combination produces tribologically optimised compounds lubricated for whole operating life	11.09.2012
TEKNOR APEX Reinforced PA compounds provide alternative to PA 12 in fuel lines	07.09.2012
A. SCHULMAN Introducing new “Schulatec” PEEK range / Collaboration with Solvay Advanced Polymers	06.09.2012
SABIC Range of high clarity propylenes extended / Cost-effectiveness for converters	05.09.2012
AKRO-PLASTIC New "Akromid" polyamide products introduced / More stringent standards targeted	03.09.2012
BOREALIS “BorECO” PP pipe grade specified for Czech sewerage network upgrade	30.08.2012
DOW Two grades added to “Affinity GA” polyolefin elastomer range	28.08.2012
FAERCH PLAST Monolayer PET packaging introduced for meat and poultry trays	23.08.2012
RTP Two grades added to range of biocompatible medical compounds	16.08.2012
GREEN DOT New compostable elastomeric bioplastic / Soft material is pliable and durable with good printability	15.08.2012
CLARIANT New PVC lubricant made from soya bean oil	14.08.2012
RHODIA New "Technyl" range for turbo technology operating above 200°C	13.08.2012
BASF Introducing "Aqua" engineering plastics approved for drinking water contact / Different regulations throughout Europe	10.08.2012
BOREALIS New Bormod PP grade for industrial pails	09.08.2012
SANITIZED New antimicrobial solution to “programme” life of agricultural films / Controlled crop protection / Additives for bio-based PVC	08.08.2012
SOLVAY SPECIALTY POLYMERS USA Addition to range of PEEK medical resins / FDA approval for implants made in radio visible material	06.08.2012
MITSUBISHI “Lupilon” flame-retardant PC grades for LED and lenses	03.08.2012
NATPET New high-clarity polypropylenes for thin-walled packaging / Focus on injection moulded containers	03.08.2012
FRANCESCO FRANCESCHETTI ELASTOMERI Low density, high impact resistance compounds introduced	12.07.2012
BAYER MATERIALSCIENCE TPU powders introduced for selective laser sintering / Brand licence awarded to development partner Solid Composites	11.07.2012
3M Lightweight PU board provides alternative to plywood	29.06.2012
SABIC Blow moulding HDPE introduced for dairy market	27.06.2012
ACTEGA Medical TPEs to be demonstrated at “Medtech Pharma” and “Fakuma”	26.06.2012

Seite 46 von 64

Topic search

Plastics Information Europe

Polymer Prices (6.179)
- Petrochemicals (524)
- Standard Thermoplastics (989)
- PET (253)
- Engineering Thermoplastics (260)
- Recyclate (383)
  - General (5)
  - Standard Thermoplastics / Recyclate (189)
  - Engineering Thermoplastics / Recyclate (189)
- Polyurethanes (252)
- High Performance Polymers (2)
- Composites (187)
- Announcements (2.583)
- World Regions (598)
  - China (302)
    - Standard Thermoplastics (152)
    - Engineering Thermoplastics (150)
  - North America (172)
  - Russia (124)
- Spot Prices (130)
- Forecasts (18)
Companies (35.350)
- Polymer Materials (17.418)
  - Petrochemicals (3.152)
  - Charge (1.880)
    - General (90)
    - Masterbatches (342)
    - Additives (791)
    - Colours (386)
    - Reinforcements/Fillers (271)
  - Polymers (11.202)
    - General (724)
    - Standard Thermoplastics (3.884)
      - General (113)
      - Polyolefins (1.975)
      - Polystyrenes (348)
      - PVC (677)
      - Polyester (568)
      - Expandable (PS, PP, PE) (203)
    - Technical Thermoplastics (3.295)
      - General (351)
      - Styrene Copolymers (263)
      - PC/PMMA (468)
      - Polyamides (922)
      - POM/PBT/PP (321)
      - Technical Compounds (970)
    - PUR (799)
    - Other (2.500)
      - General (101)
      - Composites/Thermosets (412)
      - High Performance (625)
      - Biopolymers (706)
      - Elastomers/TPE (374)
      - Recyclate (282)
  - Distribution (1.184)
- Machinery (1.113)
  - General (29)
  - Plant Construction (143)
  - Core Machines (755)
    - General (91)
    - Extrusion (181)
    - Injection Moulding (379)
    - Blow Moulding (72)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (181)
    - General (32)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (98)
    - Components (13)
  - Finishing (5)
- Processing (7.269)
  - General (909)
  - Extrusion (2.377)
    - General (125)
    - Flexible Films (1.148)
    - Rigid Films/Sheet (385)
    - Pipes (352)
    - Profiles/Rods (260)
    - Other (107)
  - Injection Moulding (1.762)
  - Blow Moulding (520)
  - PUR (319)
  - Other (1.141)
    - General (123)
    - Foam (311)
    - Composites/Thermosets (355)
    - Thermoforming (223)
    - Rotational Moulding (32)
    - Additive Manufacturing (97)
  - Finishing (241)
- Application (7.475)
  - General (131)
  - Packaging (3.228)
  - Construction (738)
  - Automotive / Transport (1.712)
  - Electrical Appliances (347)
  - Consumer Goods (694)
  - Medical (405)
  - Technical (220)
- Other (2.075)
  - Recycling/Disposal (1.666)
  - Services (256)
  - Logistics (153)
Commercial Register (145)
- Insolvency (140)
- Changes (5)
Markets (23.951)
- Polymer Materials (10.338)
  - Petrochemicals (2.540)
  - Charge (871)
    - General (38)
    - Masterbatches (97)
    - Additives (345)
    - Colours (160)
    - Reinforcements/Fillers (231)
  - Polymers (6.531)
    - General (827)
    - Standard Thermoplastics (2.478)
      - General (74)
      - Polyolefins (1.240)
      - Polystyrenes (161)
      - PVC (506)
      - Polyester (356)
      - Expandable (PS, PP, PE) (141)
    - Technical Thermoplastics (1.308)
      - General (89)
      - Styrene Copolymers (108)
      - PC/PMMA (157)
      - Polyamides (452)
      - POM/PBT/PP (112)
      - Technical Compounds (390)
    - PUR (469)
    - Other (1.449)
      - General (47)
      - Composites/Thermosets (298)
      - High Performance (306)
      - Biopolymers (435)
      - Elastomers/TPE (143)
      - Recyclate (220)
  - Other Materials (60)
  - Distribution (336)
- Machinery (521)
  - General (130)
  - Plant Construction (14)
  - Core Machines (305)
    - General (115)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.726)
  - General (446)
  - Extrusion (623)
    - General (20)
    - Flexible Films (302)
    - Rigid Films/Sheets (126)
    - Pipes (74)
    - Profiles/Rods (90)
    - Other (11)
  - Injection Moulding (180)
  - Blow Moulding (43)
  - PUR (82)
  - Other (307)
    - General (20)
    - Foam (80)
    - Composites/Thermosets (140)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.220)
  - General (47)
  - Packaging (2.046)
  - Construction (323)
  - Automotive / Transport (991)
  - Electrical Appliances (225)
  - Consumer Goods (264)
  - Medical (210)
  - Technical (61)
  - Other (53)
- Regions and Countries (4.146)
  - World (195)
  - German-speaking Countries (491)
  - Europe (2.018)
    - General (491)
    - Italy (145)
    - France (155)
    - Spain/Portugal (103)
    - Great Britain/Ireland (514)
    - Low Countries (75)
    - Central Europe (179)
    - Scandinavia (46)
    - Russia (113)
    - Eastern Europe (54)
    - Southeastern Europe (143)
  - North America (496)
  - Asia (680)
    - General (123)
    - China (392)
    - Japan (51)
    - Korea (27)
    - India (87)
  - Middle East (144)
  - Other (40)
  - South America (82)
- Other (3.000)
  - Recycling/Disposal (2.163)
  - Economic Trend (470)
  - Services (41)
  - Logistics (253)
  - Energy (73)
Production and Engineering (3.808)
- Polymer Materials (2.372)
  - Petrochemicals (60)
  - Charge (443)
    - General (14)
    - Masterbatches (112)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.838)
    - General (30)
    - Standard Themoplastics (367)
    - Technical Thermoplastics (603)
      - General (19)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (208)
      - POM/PBT/PP (69)
      - Technical Compounds (180)
    - PUR (73)
    - Other (765)
      - General (22)
      - Composites/Thermosets (108)
      - High Performance (160)
      - Biopolymers (249)
      - Elastomers/TPE (114)
      - Recyclate (112)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (438)
  - Polymer Materials (144)
  - Technical (15)
  - Product Development (41)
  - Process (83)
  - Application (93)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (864)
  - Packaging (569)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (27)
  - Consumer Goods (50)
  - Medical (37)
  - Technical (8)
  - Other (38)
- Other (39)
Management (748)
- Purchasing (105)
- General Management (171)
- Company organisation (44)
- Marketing/Sales (15)
- Human Resources (7)
- Finances (97)
- Logistics (309)
People (1.505)
Industry (6.370)
- General (1.240)
- Associations/Institutions (2.427)
- Legislation (1.393)
- Environment / Health (1.300)
- plas.TV - Plastics unite(d) (10)
Events (1.162)
Plastic Fantastic (561)
Commentaries (84)
Interviews (149)
Notes by Publisher (73)