Show topic list

Production and Engineering Polymer Materials Polymers

TEKNOR APEX Low temperature impact strength of PA compound increased by 50%	30.07.2015
CHEMOURS New pre-compound for fluorinated rubber / Cost effective alternative in automotive applications	29.07.2015
TOHO TENAX Carbon fibre developed based on PAN / Enhanced properties for aircraft and automotive uses	28.07.2015
DOW MDI-based range expanded through addition of four new products	22.07.2015
TER PLASTICS POLYMER Chromed PA 6 surfaces for high strength parts / Electroplated moulded components for automotive and other industries	21.07.2015
RESEARCH Belgian university develops improved PLA process / Patent sold to unnamed chemical producer	15.07.2015
SAMYANG New transparent polycarbonate launched / Distribution in Germany through Polymer Service PSG	09.07.2015
UBE INDUSTRIES Strontium carbonate nanoparticles produced for optical applications / Single layer retardation films improve viewing of LCD displays	29.06.2015
TEKNOR APEX TPEs introduced in low and high density grades / High colourability / Launch planned for “Fakuma” 2015	19.06.2015
LEHMANN & VOSS Shielding compounds provide protection for electronic devices	11.06.2015
SIBUR Film range extended with introduction of six grades	03.06.2015
SOLVAY SPECIALTY POLYMERS Wear resistant grade of “Veradel” PESU is introduced / Under-the-hood applications	01.06.2015
ARKEMA Launch of new renewable PA grade / French company's new “Rilsan S” is made in China	26.05.2015
BASF Shanghai is home to third “designfabrik” centre	22.05.2015
LAMILUX Silver-coated composite panel kills germs / Antibacterial properties ideal for hospital and food applications	21.05.2015
NATUREWORKS Programme to support 3D printing market needs / Development of new PLA series	19.05.2015
REPSOL Construction of new metallocene LDPE plant to begin in June / Licence from CPChem	08.05.2015
TOTAL Raised temperature HDPE grade enhances pipe productivity / Adopted in Poland and China	05.05.2015
BASF Range of melamine resin foam expanded / Sound absorber for room acoustics	04.05.2015
PROXY BIOMEDICAL PP resin launched for medical implantable devices	30.04.2015
PERSTORP Lactide copolyols developed with up to 50% renewable content	28.04.2015
HUNTSMAN Three new TPUs for food contact applications launched	20.04.2015
INVISTA Versatile transparent PAs launched / Suitable for use as blend additive to improve traditional nylon	17.04.2015
EVONIK PMMA moulding material for automotive glazing / Alternative to polycarbonate	16.04.2015
MITSUBISHI First bio-based polycarbonatediol launched / Proprietary technology yields unique composition	15.04.2015

Seite 36 von 65

Topic search

Plastics Information Europe

Polymer Prices (6.413)
- Petrochemicals (586)
- Standard Thermoplastics (1.033)
- PET (261)
- Engineering Thermoplastics (268)
- Recyclate (399)
  - General (6)
  - Standard Thermoplastics / Recyclate (196)
  - Engineering Thermoplastics / Recyclate (197)
- Polyurethanes (261)
- High Performance Polymers (2)
- Composites (194)
- Announcements (2.627)
- World Regions (620)
  - China (316)
    - Standard Thermoplastics (159)
    - Engineering Thermoplastics (157)
  - North America (180)
  - Russia (124)
- Spot Prices (137)
- Forecasts (25)
Companies (36.498)
- Polymer Materials (17.969)
  - Petrochemicals (3.261)
  - Charge (1.936)
    - General (99)
    - Masterbatches (344)
    - Additives (817)
    - Colours (400)
    - Reinforcements/Fillers (276)
  - Polymers (11.564)
    - General (747)
    - Standard Thermoplastics (4.019)
      - General (114)
      - Polyolefins (2.041)
      - Polystyrenes (361)
      - PVC (709)
      - Polyester (584)
      - Expandable (PS, PP, PE) (210)
    - Technical Thermoplastics (3.391)
      - General (352)
      - Styrene Copolymers (276)
      - PC/PMMA (480)
      - Polyamides (963)
      - POM/PBT/PP (331)
      - Technical Compounds (989)
    - PUR (817)
    - Other (2.590)
      - General (105)
      - Composites/Thermosets (417)
      - High Performance (650)
      - Biopolymers (719)
      - Elastomers/TPE (384)
      - Recyclate (315)
  - Distribution (1.208)
- Machinery (1.130)
  - General (32)
  - Plant Construction (145)
  - Core Machines (764)
    - General (92)
    - Extrusion (183)
    - Injection Moulding (384)
    - Blow Moulding (73)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (184)
    - General (34)
    - Control Systems (4)
    - Automatisation (34)
    - Dies/Tools/Moulds (99)
    - Components (13)
  - Finishing (5)
- Processing (7.478)
  - General (938)
  - Extrusion (2.427)
    - General (129)
    - Flexible Films (1.176)
    - Rigid Films/Sheet (391)
    - Pipes (359)
    - Profiles/Rods (264)
    - Other (108)
  - Injection Moulding (1.820)
  - Blow Moulding (540)
  - PUR (337)
  - Other (1.168)
    - General (131)
    - Foam (317)
    - Composites/Thermosets (360)
    - Thermoforming (230)
    - Rotational Moulding (33)
    - Additive Manufacturing (97)
  - Finishing (248)
- Application (7.693)
  - General (141)
  - Packaging (3.317)
  - Construction (759)
  - Automotive / Transport (1.769)
  - Electrical Appliances (355)
  - Consumer Goods (710)
  - Medical (416)
  - Technical (226)
- Other (2.228)
  - Recycling/Disposal (1.780)
  - Services (262)
  - Logistics (186)
Commercial Register (168)
- Insolvency (162)
- Changes (6)
Markets (24.957)
- Polymer Materials (10.758)
  - Petrochemicals (2.650)
  - Charge (891)
    - General (40)
    - Masterbatches (100)
    - Additives (350)
    - Colours (165)
    - Reinforcements/Fillers (236)
  - Polymers (6.808)
    - General (883)
    - Standard Thermoplastics (2.567)
      - General (74)
      - Polyolefins (1.282)
      - Polystyrenes (169)
      - PVC (531)
      - Polyester (368)
      - Expandable (PS, PP, PE) (143)
    - Technical Thermoplastics (1.365)
      - General (90)
      - Styrene Copolymers (118)
      - PC/PMMA (163)
      - Polyamides (477)
      - POM/PBT/PP (116)
      - Technical Compounds (401)
    - PUR (481)
    - Other (1.512)
      - General (47)
      - Composites/Thermosets (304)
      - High Performance (316)
      - Biopolymers (445)
      - Elastomers/TPE (149)
      - Recyclate (251)
  - Other Materials (61)
  - Distribution (348)
- Machinery (530)
  - General (134)
  - Plant Construction (15)
  - Core Machines (309)
    - General (119)
    - Extrusion (37)
    - Injection Moulding (131)
    - Blow Moulding (15)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (72)
    - General (21)
    - Automatisation (17)
    - Dies/Tools/Moulds (34)
- Processing (1.773)
  - General (479)
  - Extrusion (629)
    - General (20)
    - Flexible Films (305)
    - Rigid Films/Sheets (126)
    - Pipes (76)
    - Profiles/Rods (91)
    - Other (11)
  - Injection Moulding (183)
  - Blow Moulding (43)
  - PUR (84)
  - Other (310)
    - General (20)
    - Foam (82)
    - Composites/Thermosets (141)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (39)
  - Finishing (45)
- Applications (4.406)
  - General (52)
  - Packaging (2.134)
  - Construction (347)
  - Automotive / Transport (1.028)
  - Electrical Appliances (231)
  - Consumer Goods (278)
  - Medical (214)
  - Technical (64)
  - Other (58)
- Regions and Countries (4.228)
  - World (197)
  - German-speaking Countries (502)
  - Europe (2.074)
    - General (511)
    - Italy (148)
    - France (157)
    - Spain/Portugal (106)
    - Great Britain/Ireland (528)
    - Low Countries (75)
    - Central Europe (182)
    - Scandinavia (47)
    - Russia (116)
    - Eastern Europe (61)
    - Southeastern Europe (143)
  - North America (499)
  - Asia (683)
    - General (123)
    - China (393)
    - Japan (51)
    - Korea (28)
    - India (88)
  - Middle East (150)
  - Other (40)
  - South America (83)
- Other (3.262)
  - Recycling/Disposal (2.304)
  - Economic Trend (544)
  - Services (41)
  - Logistics (287)
  - Energy (86)
Production and Engineering (3.852)
- Polymer Materials (2.401)
  - Petrochemicals (65)
  - Charge (445)
    - General (14)
    - Masterbatches (114)
    - Additives (229)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.860)
    - General (32)
    - Standard Themoplastics (369)
    - Technical Thermoplastics (606)
      - General (20)
      - Styrene Copolymers (63)
      - PC/PMMA (64)
      - Polyamides (209)
      - POM/PBT/PP (69)
      - Technical Compounds (181)
    - PUR (75)
    - Other (778)
      - General (23)
      - Composites/Thermosets (108)
      - High Performance (162)
      - Biopolymers (253)
      - Elastomers/TPE (115)
      - Recyclate (117)
  - Other (31)
- Machinery (95)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (32)
    - General (16)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (445)
  - Polymer Materials (146)
  - Technical (16)
  - Product Development (42)
  - Process (84)
  - Application (95)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (58)
- New Products (871)
  - Packaging (573)
  - Construction (35)
  - Automotive / Transport (100)
  - Electrical Appliances (28)
  - Consumer Goods (51)
  - Medical (38)
  - Technical (8)
  - Other (38)
- Other (40)
Management (827)
- Purchasing (109)
- General Management (203)
- Company organisation (45)
- Marketing/Sales (15)
- Human Resources (8)
- Finances (102)
- Logistics (345)
People (1.515)
Industry (6.703)
- General (1.300)
- Associations/Institutions (2.550)
- Legislation (1.495)
- Environment / Health (1.348)
- plas.TV - Plastics unite(d) (10)
Events (1.192)
Plastic Fantastic (583)
Commentaries (86)
Interviews (165)
Notes by Publisher (83)