Show topic list

Production and Engineering Polymer Materials

UBE Launching new PA packaging grade at “K 2016” fair / Reduced risk of retort shock	24.08.2016
KRAIBURG TPE Flame retardant TPEs for construction applications / Series of compounds to be introduced at “K 2016”	23.08.2016
LATI UL approval for recycling of flame retardant reinforced PA 6.6 / Recovery rates of up to 50%	19.08.2016
PLA Researchers show that a new polymer phase can be induced in PLA / Decrease in degradation rate / Brown University team believe new polymer morphology could lead to better medical devices	18.08.2016
SO.F.TER PA-based compounds launched / Glass microspheres cut weight of plastic part / Ideal for automotive manufacturers	16.08.2016
ARLANXEO HNBR elastomers for low temperature applications developed / Two grades to be introduced at “K 2016”	15.08.2016
ZEON HNBR introduced for sealing applications / Compression set improvement through longer aging times	12.08.2016
FKUR New biodegradable blends developed for thinner compostable films	11.08.2016
BASF New high-end “Ultramid” with improved properties / “Huge step forward”	10.08.2016
UK PLASTICS INDUSTRY Over half of BPF members predict increasing sales despite “Brexit” vote / Caution on effect of referendum result on profitability / Exports expected to increase as value of pound falls / Investment intentions weaken	09.08.2016
DSM PPA grades launched as alternative to die-cast metals / Cost savings of up to 50% offered / Die-cast replacement market growing close to 10% annually	28.07.2016
LANXESS Range of hydrolysis stabilisers is extended / Ease in processing without preheating	27.07.2016
SOLVAY SPECIALTY POLYMERS Food contact PPS range extended with introduction of three grades	26.07.2016
BASF Certified biobased compostable particle foam added to “ecovio” range / High mechanical and thermal properties / Food contact alternative to be introduced	20.07.2016
SABIC PP grade introduced for production of injection moulded rigid packaging / Improved balance in stiffness and impact strength	19.07.2016
HUNTSMAN “Tioxide” pigment family is extended	15.07.2016
WACKER Extended “Vinnex” additives line for bioplastics to be displayed at “K 2016”	14.07.2016
LANXESS Colorant microgranules to be demonstrated at “K 2016” / Improved performance allied with safety in handling	13.07.2016
BASF Launch of new PPA portfolio / More freedom for technical design	05.07.2016
LANXESS PA and PBT product portfolios extended / Processing times and energy consumption reduced	04.07.2016
DSM TPC developed for hot air turbocharging ducts	01.07.2016
TRINSEO General purpose PS introduced for medical applications	30.06.2016
HUNTSMAN Resin system launched for rail vehicle interiors / Combining aesthetics with functionality in composite parts	29.06.2016
TEKNOR APEX “Chemlon” range extended with addition of automotive PA 6/12 / Material in use in brake jacketing for North American OEM	28.06.2016
HOFFMANN + VOSS UL-listed rPC range introduced	27.06.2016

Seite 36 von 78

Topic search

Plastics Information Europe

Polymer Prices (5.841)
- Petrochemicals (423)
- Standard Thermoplastics (920)
- PET (241)
- Engineering Thermoplastics (247)
- Recyclate (353)
  - Standard Thermoplastics / Recyclate (176)
  - Engineering Thermoplastics / Recyclate (177)
- Polyurethanes (239)
- High Performance Polymers (2)
- Composites (175)
- Announcements (2.557)
- World Regions (562)
  - China (278)
    - Standard Thermoplastics (140)
    - Engineering Thermoplastics (138)
  - North America (160)
  - Russia (124)
- Spot Prices (118)
- Forecasts (4)
Companies (33.224)
- Polymer Materials (16.467)
  - Petrochemicals (2.955)
  - Charge (1.799)
    - General (89)
    - Masterbatches (332)
    - Additives (750)
    - Colours (367)
    - Reinforcements/Fillers (261)
  - Polymers (10.583)
    - General (672)
    - Standard Thermoplastics (3.667)
      - General (113)
      - Polyolefins (1.858)
      - Polystyrenes (323)
      - PVC (642)
      - Polyester (544)
      - Expandable (PS, PP, PE) (187)
    - Technical Thermoplastics (3.124)
      - General (348)
      - Styrene Copolymers (251)
      - PC/PMMA (441)
      - Polyamides (859)
      - POM/PBT/PP (304)
      - Technical Compounds (921)
    - PUR (763)
    - Other (2.357)
      - General (100)
      - Composites/Thermosets (398)
      - High Performance (588)
      - Biopolymers (681)
      - Elastomers/TPE (357)
      - Recyclate (233)
  - Distribution (1.130)
- Machinery (1.063)
  - General (27)
  - Plant Construction (129)
  - Core Machines (730)
    - General (88)
    - Extrusion (176)
    - Injection Moulding (363)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (173)
    - General (31)
    - Control Systems (4)
    - Automatisation (33)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.855)
  - General (857)
  - Extrusion (2.261)
    - General (112)
    - Flexible Films (1.089)
    - Rigid Films/Sheet (368)
    - Pipes (340)
    - Profiles/Rods (255)
    - Other (97)
  - Injection Moulding (1.643)
  - Blow Moulding (491)
  - PUR (285)
  - Other (1.085)
    - General (114)
    - Foam (302)
    - Composites/Thermosets (335)
    - Thermoforming (209)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (233)
- Application (7.027)
  - General (125)
  - Packaging (3.033)
  - Construction (697)
  - Automotive / Transport (1.611)
  - Electrical Appliances (326)
  - Consumer Goods (653)
  - Medical (378)
  - Technical (204)
- Other (1.812)
  - Recycling/Disposal (1.464)
  - Services (248)
  - Logistics (100)
Commercial Register (110)
- Insolvency (105)
- Changes (5)
Markets (22.220)
- Polymer Materials (9.638)
  - Petrochemicals (2.341)
  - Charge (834)
    - General (38)
    - Masterbatches (90)
    - Additives (331)
    - Colours (153)
    - Reinforcements/Fillers (222)
  - Polymers (6.099)
    - General (719)
    - Standard Thermoplastics (2.344)
      - General (74)
      - Polyolefins (1.158)
      - Polystyrenes (154)
      - PVC (486)
      - Polyester (337)
      - Expandable (PS, PP, PE) (135)
    - Technical Thermoplastics (1.234)
      - General (87)
      - Styrene Copolymers (101)
      - PC/PMMA (145)
      - Polyamides (420)
      - POM/PBT/PP (106)
      - Technical Compounds (375)
    - PUR (443)
    - Other (1.359)
      - General (46)
      - Composites/Thermosets (287)
      - High Performance (293)
      - Biopolymers (420)
      - Elastomers/TPE (137)
      - Recyclate (176)
  - Other Materials (57)
  - Distribution (307)
- Machinery (501)
  - General (127)
  - Plant Construction (14)
  - Core Machines (289)
    - General (109)
    - Extrusion (36)
    - Injection Moulding (123)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.639)
  - General (404)
  - Extrusion (596)
    - General (20)
    - Flexible Films (290)
    - Rigid Films/Sheets (116)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (11)
  - Injection Moulding (176)
  - Blow Moulding (43)
  - PUR (77)
  - Other (299)
    - General (20)
    - Foam (77)
    - Composites/Thermosets (136)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.891)
  - General (37)
  - Packaging (1.872)
  - Construction (297)
  - Automotive / Transport (930)
  - Electrical Appliances (212)
  - Consumer Goods (243)
  - Medical (198)
  - Technical (56)
  - Other (46)
- Regions and Countries (4.016)
  - World (194)
  - German-speaking Countries (472)
  - Europe (1.944)
    - General (464)
    - Italy (142)
    - France (155)
    - Spain/Portugal (97)
    - Great Britain/Ireland (502)
    - Low Countries (74)
    - Central Europe (173)
    - Scandinavia (44)
    - Russia (107)
    - Eastern Europe (46)
    - Southeastern Europe (140)
  - North America (480)
  - Asia (667)
    - General (118)
    - China (389)
    - Japan (49)
    - Korea (26)
    - India (85)
  - Middle East (141)
  - Other (37)
  - South America (81)
- Other (2.535)
  - Recycling/Disposal (1.898)
  - Economic Trend (341)
  - Services (41)
  - Logistics (201)
  - Energy (54)
Production and Engineering (3.690)
- Polymer Materials (2.305)
  - Petrochemicals (55)
  - Charge (435)
    - General (13)
    - Masterbatches (111)
    - Additives (223)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.785)
    - General (29)
    - Standard Themoplastics (356)
    - Technical Thermoplastics (592)
      - General (19)
      - Styrene Copolymers (62)
      - PC/PMMA (62)
      - Polyamides (203)
      - POM/PBT/PP (66)
      - Technical Compounds (180)
    - PUR (69)
    - Other (739)
      - General (21)
      - Composites/Thermosets (106)
      - High Performance (159)
      - Biopolymers (238)
      - Elastomers/TPE (113)
      - Recyclate (102)
  - Other (30)
- Machinery (94)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (33)
- Research (420)
  - Polymer Materials (140)
  - Technical (13)
  - Product Development (40)
  - Process (81)
  - Application (89)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (53)
- New Products (833)
  - Packaging (546)
  - Construction (34)
  - Automotive / Transport (97)
  - Electrical Appliances (26)
  - Consumer Goods (49)
  - Medical (37)
  - Technical (7)
  - Other (37)
- Other (38)
Management (634)
- Purchasing (100)
- General Management (136)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (88)
- Logistics (246)
People (1.473)
Industry (5.724)
- General (1.135)
- Associations/Institutions (2.205)
- Legislation (1.206)
- Environment / Health (1.168)
- plas.TV - Plastics unite(d) (10)
Events (1.120)
Plastic Fantastic (521)
Commentaries (78)
Interviews (130)
Notes by Publisher (69)